A mathematical model to predict the grain size of nanocrystalline CdS thin films based on the deposition condition used in the sol–gel spin coating method

Design of experiment (DOE) based on central composite design (CCD) has been employed for the development of a mathematical model correlating the important process parameters like thiourea concentration (U), annealing temperature (A), rotational speed (S), and annealing time (T) of the spin coating process for the preparation of CdS thin films. The experiments were conducted as per the design matrix. Nanocrystalline CdS thin films have been prepared using cadmium nitrate and thiourea as precursors by sol gel spin coating method using the results of the mathematical model. The prepared CdS films have been characterized and the crystal structure and grain size of the samples were analyzed using X-ray diffraction technique. The adequacy of the developed models was checked by analysis of variance (ANOVA) technique. The accuracy of prediction has been carried out by conducting confirmation test. Using this model, the main effect of process parameters on grain size of CdS films have been studied. These parameters were optimized to obtain minimum grain size using the Microsoft excel solver. The results have been verified by depositing CdS films using the optimized conditions. These films have been characterized using X-ray diffraction technique and the grain size is found to be 8.8 nm. The high resolution transmission electron microscopy (HRTEM) analysis showed the grain size of the prepared CdS film to be ∼7 nm. UV–vis spectroscopy analysis revealed that CdS films exhibited quantum confinement effect.     

Self‐Healing Polyester Urethane Supramolecular Elastomers Reinforced with Cellulose Nanocrystals for Biomedical Applications

Stretchable self‐healing urethane‐based biomaterials have always been crucial for biomedical applications; however, the strength is the main constraint of utilization of these healable materials. Here, a series of novel, healable, elastomeric, supramolecular polyester urethane nanocomposites of poly(1,8‐octanediol citrate) and hexamethylene diisocyanate reinforced with cellulose nanocrystals (CNCs) are introduced. Nanocomposites with various amounts of CNCs from 10 to 50 wt% are prepared using solvent casting technique followed by the evaluation of their microstructural features, mechanical properties, healability, and biocompatibility. The synthesized nanocomposites indicate significantly higher tensile modulus (approximately 36–500‐fold) in comparison to the supramolecular polymer alone. Upon exposure to heat, the materials can reheal, but nevertheless when the amount of CNC is greater than 10 wt%, the self‐healing ability of nanocomposites is deteriorated. These materials are capable of rebonding ruptured parts and fully restoring their mechanical properties. In vitro cytotoxicity test of the nanocomposites using human dermal fibroblasts confirms their good cytocompatibility. The optimized structure, self‐healing attributes, and noncytotoxicity make these nanocomposites highly promising for tissue engineering and other biomedical applications.     

A Novel Green Synthesis of Silver Nanoparticles Using Gum Karaya: Characterization,Antimicrobial and Catalytic Activity Studies

Stable silver nanoparticles have been synthesized using gum karaya acting as both reducing and stabilizing agent without using any synthetic reagent. The reaction is performed using water, which is an environmentally safe solvent. This reaction was carried out in an autoclave at a pressure of 15 psi and 120 °C temperature by varying the time. The influence of different parameters such as time, change of concentration of silver nitrate and concentration of gum karaya on the formation of silver nanoparticles has been studied. The synthesized silver nanoparticles are characterized by UV–Vis spectroscopy, FTIR, XRD and TEM. UV–Vis analysis of the sample confirmed the formation of silver nanoparticles exhibiting a sharp peak at a wavelength of 420 nm. TEM micrographs showed the formation of well-dispersed silver nanoparticles of size 2–4 nm. The antimicrobial activity of silver nanoparticles stabilized in gum karaya is tested against Escherichia coli, Micrococcus luteus and is found to be possessing inhibiting property. The silver nanoparticles stabilized in gum karaya exhibited very good catalytic activity and the kinetics of the reaction was found to be pseudo first order with respect to the 4-nitrophenol.     

A remarkable accelerating effect of Ag-salt on intramolecular cyclization of o-(1-alkynyl)benzenesulfonamides

Herein, we report transition metal-catalyzed intramolecular cyclization of o-(1-alkynyl)benzenesulfonamides to afford 3-substituted benzothiazines regioselectively via a C-N bond forming reaction and Cu-catalyzed sequential C-N and C-C bond formation leading to the corresponding 3,4-disubstituted derivatives.     

UDE-based decoupled full-order sliding mode control for a class of uncertain nonlinear MIMO systems

In this paper, a generalized control scheme for the class of nonlinear multiple-input multiple-output (MIMO) uncertain system with cross-coupling and nonlinearity in their input channels under the influence of external disturbances is presented. This is accomplished using full-order model following sliding mode control based on uncertainty and disturbance estimator (UDE) technique. The fourth-order uncertain nonlinear MIMO system is separated into multiple single-input single-output double integrator subsystems by considering the effect of input coupling and nonlinearity as a disturbance. The UDE is designed to estimate the plant uncertainties as well as external disturbances without the knowledge of the bounds on the uncertainties. The proposed method decouples the system and overcomes the problem of high initial control which ultimately eliminates the reaching phase and the chattering phenomenon which is generally occurred in sliding mode control. The effectiveness of the proposed control scheme is demonstrated through numerical simulation of two-link manipulator.     

Regioselective Photocyclization Reactions of 3‐Allyloxy‐6‐chloro‐2‐(thiophen‐3‐yl)‐4H‐chromen‐4‐one: Solvent Effect

The photo‐irradiation of thienylchromenone resulted in the regioselective cyclization which is exclusively controlled by the nature of solvent used as reaction medium. Compared to nonpolar medium, polar solvent furnished a diverse array of novel angular tetracyclic photoproducts with gem‐dihydro functionality and exocyclic double bonds on the fused pyran ring, which is unprecedented to best of our knowledge.     

Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.     

Interplay between bulk viscoelasticity and surface energy in autohesive tack of rubber‐tackifier blends

The effects of change in surface energy and bulk viscoelastic properties on the autohesive tack strength of brominated isobutylene‐co‐p‐methylstyrene (BIMS) rubber have been investigated by the addition of hydrocarbon resin (HCR) tackifier and maleated hydrocarbon resin (MA‐g‐HCR) tackifier. The addition of compatible HCR tackifier results in a reasonable increment in the tack strength of BIMS rubber by modifying only the bulk viscoelastic properties (compliance, entanglement molecular weight, relaxation time, self‐diffusion, and monomer friction coefficient values) of BIMS rubber to perform better during the course of bonding and debonding steps of the peel test. Incorporation of MA‐g‐HCR tackifier (containing 5–20 wt % of grafted maleic anhydride) steadily increases the tack strength of BIMS rubber further by precisely modifying both the surface energy and bulk viscoelastic properties to perform much better in the bonding and debonding steps. However, beyond 20 wt % of grafted maleic anhydride in the HCR tackifier, the tack strength starts decreasing due to the incompatibility between the blend components, and hence, the bulk viscoelastic properties required for bond formation are severely retarded by the interrelated reinforcing effect and the phase separation effect of the brittle MA‐g‐HCR tackifier in the BIMS rubber. Hence, the polar groups in a tackifier will contribute to significant enhancement of autohesive tack strength only if the bulk viscoelastic property of the rubber‐tackifier blend is favorable for bond formation and bond separation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 972–982, 2010     

Studies on evaporated titanium oxide thin films for oxygen gas detection

Present work deals with the preparation of TiO₂ thin films of different thicknesses by PVD technique using an electron beam and to characterize the films for oxygen gas detection. The films were characterized using optical transmission measurements, XRD and atomic force microscopy. From the spectral data, the extinction, absorption coefficient and refractive index of the films are evaluated and reported. The optical band gap energy varies between 3 and 3.68 eV. The XRD pattern confirms the formation of polycrystalline anatase structure of Titanium with preferred orientation of (110) plane. The AFM images indicate the presence of coarse and fine grains with uniform as well as smooth surfaces over the entire range of the analyzed surface. Response characteristics of TiO₂ thin films for oxygen gas detection are studied, which indicate a low response time of 120 seconds and high sensitivity of 16 at the operating temperature 450 °C. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.