Macrodiolide Formation by the Thioesterase of a Modular Polyketide Synthase

Elaiophylin is an unusual C₂‐symmetric antibiotic macrodiolide produced on a bacterial modular polyketide synthase assembly line. To probe the mechanism and selectivity of diolide formation, we sought to reconstitute ring formation in vitro by using a non‐natural substrate. Incubation of recombinant elaiophylin thioesterase/cyclase with a synthetic pentaketide analogue of the presumed monomeric polyketide precursor of elaiophylin, specifically its N‐acetylcysteamine thioester, produced a novel 16‐membered C₂‐symmetric macrodiolide. A linear dimeric thioester is an intermediate in ring formation, which indicates iterative use of the thioesterase active site in ligation and subsequent cyclization. Furthermore, the elaiophylin thioesterase acts on a mixture of pentaketide and tetraketide thioesters to give both the symmetric decaketide diolide and the novel asymmetric hybrid nonaketide diolide. Such thioesterases have potential as tools for the in vitro construction of novel diolides.     

A Novel Microsensor for Measuring Angular Distribution of Radiative Intensity

This article presents the design, construction and characterization of a novel type of light probe for measuring the angular radiance distribution of light fields. The differential acceptance angle (DAA) probe can resolve the directionality of a light field in environments with steep light gradients, such as microbial mats, without the need to remove, reorient, and reinsert the probe, a clear advantage over prior techniques. The probe consists of an inner irradiance sensor inside a concentric, moveable light‐absorbing sheath. The radiative intensity in a specific zenith direction can be calculated by comparing the irradiance onto the sensor at different acceptance angles. We used this probe to measure the angular radiance distribution of two sample light fields, and observed good agreement with a conventional radiance probe. The DAA probe will aid researchers in understanding light transfer physics in dense microbial communities and expedite validation of numerical radiative transfer models for these environments.     

Linear Isotropic Relations in Finite Hyperelasticity: Some General Results

The form of the classical stress–strain relations of linear elasticity are considered here within the context of nonlinear elasticity. For both Cauchy and symmetric Piola-Kirchhoff stresses, conditions are obtained for the associated strain fields so that they are independent of the material constants and compatible with existence of a strain–energy function. These conditions can be integrated in both cases to obtain the most general strain field that satisfies these conditions and the corresponding strain–energy function is obtained. In both cases, a natural choice of form of solution is suggested by the special case of the compatibility conditions being satisfied identically. It will be shown that some strain–energy functions previously introduced in the literature are special cases of the results obtained here. Some recent linear stress–strain relations, proposed in the context of Cauchy elasticity, are examined to see if they are compatible with hyperelasticity.      

Condensation and freezing of droplets on superhydrophobic surfaces

Superhydrophobic coatings are reported as promising candidates for anti-icing applications. Various studies have shown that as well as having ultra water repellency the surfaces have reduced ice adhesion and can delay water freezing. However, the structure or texture (roughness) of the superhydrophobic surface is subject to degradation during the thermocycling or wetting process. This degradation can impair the superhydrophobicity and the icephobicity of those coatings. In this review, a brief overview of the process of droplet freezing on superhydrophobic coatings is presented with respect to their potential in anti-icing applications. To support this discussion, new data is presented about the condensation of water onto physically decorated substrates, and the associated freezing process which impacts on the freezing of macroscopic droplets on the surface.     

Bile UPLC-MS fingerprinting and bile acid fluxes during human liver transplantation

Bile flow restoration is a crucial step in the recovery process post transplantation of the liver. Here, metabolic trajectories based on changes in bile secretion - a known marker of functionality - have been utilised as an approach for discovering bile fluxes during transplantation. A total of ten liver transplants were monitored and from these 68 bile samples from both donors and recipients were collected and analysed using ultra-performance LC-MS in combination with multivariate statistical analysis. Based on the principal component scores constructed from the total bile fingerprint, differentiation of the bile acid concentrations before and after transplantation was detected. A trend was also observed, by constructing metabolic trajectories, whereby the post-transplant profiles approached the position of pre-transplant profiles within 30-60?min of the restoration of bile secretion function. The ten major conjugated bile acid salts were measured and a significant increase in concentrations of taurocholic acid and taurochenodeoxycholic acid were seen after transplantation. In addition, the ratios of secondary bile acids detected in gall bladder and hepatic bile were measured before and after transplantation. This study suggests that bile acid ratios in the donor liver at the pre-transplant and post-transplant stage may be important and that profiling of secreted bile after transplantation may aid clinical assessment and progress post-transplantation.     

Polymeric emulsion and crosslink-mediated synthesis of super-stable nanoparticles as sustained-release anti-tuberculosis drug carriers

This study focused on evaluating four emulsion-based processing strategies for polymeric nanoparticle synthesis to explicate the mechanisms of nanoparticle formation and the influence on achieving sustained-release of two anti-tuberculosis drugs, isoniazid and rifampicin. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles were formulated with and without sorbitan mono-oleate as a stabilizer using emulsion-solvent-surfactant-evaporation (ESSE) and emulsion-solvent-evaporation (ESE) approaches. An alginate solution gelled by ionic crosslinking with calcium chloride was employed to prepare alginate hydrogel nanoparticles via reverse-emulsion-cationic-gelification (RECG) and reverse-emulsion-surfactant-cationic-gelification (RESCG) approaches. In vitro drug release analysis was performed. The size, zeta potential and morphology of the nanoparticles were analyzed. Molecular mechanics energy relationships (MMER) were employed to explore the spatial disposition of alginate and PLGA with respect to the emulsifying profile of sorbitan monooleate and to corroborate the experimental findings. Results revealed that particle size of the PLGA nanoparticles was influenced by the stabilizer concentration. Nanoparticles synthesized by the ESSE approach had smaller sizes of 240±8.7 nm and 195.5±5.4 nm for rifampicin- and isoniazid-loaded nanoparticles, respectively. This was a substantial size reduction from nanoparticles generated by the ESE approach (>1000 nm). The RESCG approach produced stable and higher nanoparticle yields with desirable size (277±1.0 nm; 289±1.2 nm), a low polydispersity index (27.1±0.3 mV; 28.5±0.5 mV) and drug entrapment efficiency of 73% and 75% for isoniazid and rifampicin, respectively. Drug release from the ESSE and RESCG synthesized nanoparticles displayed desirable release of the two anti-TB drugs with sustained zero-order kinetics over a period of 8h. MMER supported the mechanisms of nanoparticle formation with a sphericalized interlaced network configuration.     

The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films

The nature of main in-plane skeleton Raman modes (C=C and C-C stretch) of poly(3-hexylthiophene) (P3HT) in pristine and its blend thin films with [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) is studied by resonant and nonresonant Raman spectroscopy and Raman simulations. Under resonant conditions, the ordered phase of P3HT with respect to its disordered phase is identified by (a) a large shift in the C=C mode peak position to lower wavenumber (~21 cm(-1) shift), (b) a narrower fwhm of the C=C mode (~9 cm(-1) narrower), (c) a larger intensity of the C-C mode relative to the C=C mode (~56% larger), and (d) a very small Raman dispersion (~5 cm(-1)) of the C=C mode. The behavior of the C=C and C-C modes of the ordered and disordered phases of P3HT can be explained in terms of different molecular conformations. The C=C mode of P3HT in P3HT:PCBM blend films can be reproduced by simple superposition of the two peaks observed in different phases of P3HT (ordered and disordered). We quantify the molecular order of P3HT after blending with PCBM and the subsequent thermal annealing to be 42 ± 5% and 94 ± 5% in terms of the fraction of ordered P3HT phase, respectively. The increased molecular order of P3HT in blends upon annealing correlates well with enhanced device performance (J(SC), -4.79 to -8.72 mA/cm(2) and PCE, 1.07% to 3.39%). We demonstrate that Raman spectroscopy (particularly under resonant conditions) is a simple and powerful technique to study molecular order of conjugated polymers and their blend films.     

Fragmentations observed in the reactions of α-methoxy-γ-alkoxyalkyl iodide substrates with super-electron-donors derived from 4-DMAP and N-methylbenzimidazole

Reactions of super-electron-donors (SEDs) derived from 4-dimethylaminopyridine and from N-methylbenzimidazole with α-methoxy-γ-alkoxyalkyl iodides lead to liberation of the γ-alkoxy groups as their alcohols. This is consistent with generation of alkyl radicals from the alkyl halide precursors, and trapping of these radicals by the radical-cation of the SED, followed by a heterolytic fragmentation.     

Planar hydrocarbons more optically active than their isomeric helicenes

Comparisons are made of the calculated optical rotation tensors of C(2v)-symmetric, polyaromatic hydrocarbons and their [5]helicene, [6]helicene, and [7]helicene isomers. Seven ∩-shaped, planar compounds had, in each case, larger computed tensor elements than the chiral helicenes. Merely obviating the condition of solution averaging wholly changes expectations of the magnitudes and etiologies of optical activity. Symmetries of achiral compounds facilitate semiquantitative correlations between structure and optical rotation.