Ferrocene-containing carbohydrate dendrimers

Aliphatic amines, incorporating one or three (branched) acylated beta-D-glucopyranosyl residues, were coupled with the acid chloride of ferrocenecarboxylic acid and with the diacid chloride of 1,1'-ferrocenedicarboxylic acid to afford four dendrimer-type, carbohydrate-coated ferrocene derivatives in good yields (54-92%). Deprotection of the peracylated beta-D-glucopyranosyl residues was achieved quantitatively by using Zemplén conditions, affording four water-soluble ferrocene derivatives. When only one of the two cyclopentadienyl rings of the ferrocene unit is substituted, strong complexes are formed with beta-cyclodextrin in H2O, as demonstrated by liquid secondary ion mass spectrometry (LSIMS), 1H NMR spectroscopy, electrochemical measurements, and circular dichroism spectroscopy. Molecular dynamics calculations showed that the unsubstituted cyclopentadienyl ring is inserted through the cavity of the toroidal host in these complexes. The electrochemical behavior of the protected and deprotected ferrocene-containing dendrimers was investigated in acetonitrile and water, respectively. The diffusion coefficient decreases with increasing molecular weight of the compound. The potential for oxidation of the ferrocene core, the rate constant of heterogeneous electron transfer, and the rate constant for the energy-transfer reaction with the luminescent excited state of the [Ru(bpy)3]2+ complex (bpy = 2,2'-bipyridine) are strongly affected by the number (one or two) of substituents and by the number (one or three) of carbohydrate branches present in the substituents. These effects are assigned to shielding of the ferrocene core by the dendritic branches. Electrochemical evidence for the existence of different conformers for one of the dendrimers in aqueous solution was obtained.     

The extraordinary ability of guanidinate derivatives to stabilize higher oxidation numbers in dimetal units by modification of redox potentials: structures of Mo(2)(5+) and Mo(2)(6+) compounds

Full characterization of the first homologous series of dimolybdenum paddlewheel compounds having electronic configurations of the types sigma(2)pi(4)delta(x), x = 2, 1, 0, and Mo-Mo bond orders of 4, 3.5, and 3, respectively, has been accomplished with the guanidinate-type ligand hpp (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). Essentially quantitative oxidation of Mo(2)(hpp)(4), 1, by CH(2)Cl(2) gives Mo(2)(hpp)(4)Cl, 2. The halide in 2 can be replaced by reaction with TlBF(4) to produce Mo(2)(hpp)(4)(BF(4)), 3. Further oxidation of 2 by AgBF(4) produces Mo(2)(hpp)(4)ClBF(4), 4. The change from bond order 4 (in 1) to 3.5 in Mo(2)(hpp)(4)Cl is accompanied by an increase in the Mo-Mo bond length of 0.061 to 2.1280(4) A. A further increase of 0.044 A in the Mo-Mo distance to 2.172(1) A is observed as the bond order decreases to 3 in 4. At the same time, the Mo-N distances decrease smoothly as the oxidation state of the Mo atoms increases. Electrochemical studies have shown two chemically reversible processes at very negative potentials, E(1)(1/2)= -0.444 V and E(2)(1/2)= -1.271 V versus Ag/AgCl. These correspond to the processes Mo(2)(6+/5+) and Mo(2)(5+/4+), respectively. The latter potential is displaced by over 1.5 V relative to those of the Mo(2)(formamidinate)(4) compounds and the first one has never been observed in such complexes. Thus, in surprising contrast to previously observed behavior of the dimolybdenum unit, when it is surrounded by the very basic guanidinate ligand hpp, there is an extraordinary stabilization of the higher oxidation numbers of the molybdenum atoms.     

Molecular compasses and gyroscopes. II. Synthesis and characterization of molecular rotors with axially substituted bis[2-(9-triptycyl)ethynyl]arenes

We have developed a simple convergent procedure for the synthesis of molecular rotors consisting of a central aromatic group coupled with two axially positioned ethynyltriptycenes. Molecular rotors with 1,4-phenylene (1), 1,4'-1,1'-biphenylene (2), 9,10-anthracenylene (3), and 2,7-pyrenylene (4) groups were prepared by Pd(0)-catalyzed coupling of ethynyl triptycenes with the corresponding dibromoarenes. Although compounds 1-4 were not expected to have free rotation in the solid state, the rotational potentials of 1 and 3 were analyzed by semiempirical methods and the crystal packing of 1 was analyzed to design the structures most likely to yield a functional rotor in the solid state. Semiempirical PM3 calculations predict compounds 1, 2, and 4 to have frictionless internal rotation even at temperatures as low as 25 K, while compound 3 is expected to have a barrier of ca. 4 kcal/mol.     

Fluorimetric determination of aflatoxins by flow-injection analysis

Summary A fast and inexpensive fluorimetric method for the determination of total aflatoxins (B₁, B₂, G₁, and G₂) in food of use in screening numerous samples suspectedly containing these substances is proposed. The sensitivity of the method (determination range between 0.5 and 200.0 ng ml^–1) allows these analytes to be detected at concentrations well below legal limits; hence, separation-detection techniques such as HPLC need only be used with samples in which these compounds are found to occur. The method has been applied to maize, peanut and tapioca samples, obtaining average recoveries of 100.9 with deviations of ±5% with respect to 100% recovery.

---

Fluorometrische Bestimmung von Aflatoxinen durch Fließinjektionsanalyse

     

Gold internal standard correction for elemental imaging of soft tissue sections by LA-ICP-MS: element distribution in eye microstructures

Laser ablation coupled to inductively coupled plasma mass spectrometry has been developed for the elemental imaging of Mg, Fe and Cu distribution in histological tissue sections of fixed eyes, embedded in paraffin, from human donors (cadavers). This work presents the development of a novel internal standard correction methodology based on the deposition of a homogeneous thin gold film on the tissue surface and the use of the ¹⁹⁷Au⁺ signal as internal standard. Sample preparation (tissue section thickness) and laser conditions were carefully optimized, and internal normalisation using ¹⁹⁷Au⁺ was compared with ¹³C⁺ correction for imaging applications. ²⁴Mg⁺, ⁵⁶Fe⁺ and ⁶³Cu⁺ distributions were investigated in histological sections of the anterior segment of the eye (including the iris, ciliary body, cornea and trabecular meshwork) and were shown to be heterogeneously distributed along those tissue structures. Reproducibility was assessed by imaging different human eye sections from the same donor and from ten different eyes from adult normal donors, which showed that similar spatial maps were obtained and therefore demonstrate the analytical potential of using ¹⁹⁷Au⁺ as internal standard. The proposed analytical approach could offer a robust tool with great practical interest for clinical studies, e.g. to investigate trace element distribution of metals and their alterations in ocular diseases.

A note on the generalized Rayleigh equation: limit cycles and stability

The aim of the present paper is to give an analytical proof on the existence and stability of the limit cycles in the generalized Rayleigh equation, which models diabetic chemical processes through a constant area duct where the effect of heat addition or rejection is considered, ${\frac{d^{2}x}{dt^{2}}+x = \varepsilon(1-(\frac{dx}{dt}) ^{2n})\,\frac{dx}{dt}}$ where n is a positive integer and ε a small real parameter. The main tool used for it is the averaging theory.     

Gas chromatography–triple-quadrupole mass spectrometry for analysis of selected polyhalogenated pollutants in plants. Comparison of extraction methods

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.5 g graphitized carbon black (GCB) and two extraction cycles of 10 min with n-hexane–ethyl acetate 80:20 (v/v) at 60 °C were used for the PLE procedure. UAE with in-column clean-up was conducted under conditions similar to those reported for the PLE method whereas in UAE with dSPE clean-up purification of the extract was performed after extraction using primary and secondary amine sorbent (PSA) and GCB. Recovery from 82 to 104 % was obtained for all the compounds by PLE whereas, in general, lower extraction efficiency was obtained by UAE with in-column clean-up (especially for BDE-17 and BDE-183, for which recovery was 70 and 41 %, respectively) and by UAE with dSPE clean-up, for which the main drawback is that BDE-183 cannot be extracted. Finally, PLE was used for analysis of PCBs and PBDEs in different plants (Lolium rigidum, Lactuca serriola, Malva sylvestris, and Verbascum thapsus) collected from residential and/or rural areas of Madrid (Spain). Several of the analyzed compounds were detected at low levels in these plants, but only PCB-153 could be quantified.