Asymmetric or symmetric bilayer formation during oblique drop impact depends on rheological properties of saturated and unsaturated lipid monolayers

Bilayer structures are formed by approaching two liquid surfaces with phospholipid monolayers, which are brought into contact by oblique drop impact on a liquid surface. Asymmetric bilayers can be produced by the coupling of drop and target monolayers. In contrast, symmetric bilayers or multilayers are formed by collapse of the compressed target monolayer. We show that under all studied conditions bilayer/multilayer synthesis takes place. The experimental conditions for the synthesis of asymmetric or symmetric bilayers are described quantitatively in terms of the surface rheological (surface elasticity and dilational viscosity) and the hydrodynamical parameters (Weber number and impact angle). The composition and mechanical properties of the phospholipid monolayers strongly influences the patterns of drop impact and the bilayer/multilayer formation. Cholesterol stiffens unsaturated phospholipid monolayers and fluidifies saturated monolayers. All monolayers form asymmetric vesicle-like structures, which are stable in the aqueous medium. Additionally, unsaturated phospholipid monolayers without cholesterol form symmetric vesicles by folding parts of the target monolayer. Sufficient presence of cholesterol in unsaturated phospholipid monolayers inhibits the folding of the target monolayer and the subsequent formation of symmetric bilayers. The rheological properties of saturated and unsaturated phospholipid monolayers and their mixtures with cholesterol are discussed. Based on drop impact results it is shown that the state of a so far undefined region in the DPPC/cholesterol phase diagram is a fluid phase.     

On the correlation between thermal analysis results and corrosion behaviour of some metallic religious artefacts

The aim of this study was to investigate the effects of immersion time on the electrochemical corrosion behaviour of three brass alloys (CuZn) coming from religious artefacts in simulated acid rain at 25 °C, utilising the electrochemical impedance spectroscopy (EIS). The main parameters of the corrosion process were established. On the other hand, the alloys were also analysed by means DSC and TG/DTA before and after immersion in the corrosive environment. Finally, the obtained results were compared in order to correlate them with each other and with the corrosion process.     

Studies on terbium activated yttrium based tantalate phosphors

Terbium activated yttrium niobium tantalate phosphors were prepared by solid-state reaction and were characterized by photoluminescence measurements, X-ray diffraction and scanning electron microscopy. Photoluminescence (PL) of Y_0.95Tb_0.05Ta_1?xNb_xO₄ phosphors (x = 0–1) are influenced by the host-lattice composition, degree of crystalline order and particle morphology and size. The effect of the morpho-structural properties on PL characteristics of Y(Ta,Nb)O₄:Tb powders is reported.     

A generalized Schrödinger equation via a complex Lagrangian of electrodynamics

In this paper we give a generalized form of the Schrödinger equation in the relativistic case, which contains a generalization of the Klein-Gordon equation. By complex Legendre transformation, the complex Lagrangian of electrodynamics produces a complex relativistic Hamiltonian H of electrodynamics, on the holomorphic cotangent bundle T′* M. By a special quantization process, a relativistic time dependent Schrödinger equation, in the adapted frames of (T′* M, H) is obtained. This generalized Schrödinger equation can be expressed with respect to the Laplace operator of the complex Hamilton space (T′*M, H). Finally, under some additional conditions on the proper time s of the complex space-time M and the time parameter t along the quantum state, by the method of separation of variables, we obtain two classes of solutions for the Schrödinger equation, one for the weakly gravitational complex curved space M, and the second in the complex space-time with Schwarzschild metric.     

DFT study and quantitative detection by surface‐enhanced Raman scattering (SERS) of ethyl carbamate

Ethyl carbamate (EC), a potentially toxic compound, is found in alcoholic beverages and fermented foodstuff. A combined experimental and theoretical study of Raman on EC is reported in this work for the first time. The Raman bands observed for EC in solid phase are characteristic for the carbonyl group, C―C, C―H and N―H stretching and deformation vibrations. These spectral features coupled with a pKa study allowed establishing the neutral species of EC present in the aqueous solutions experimentally tested at different concentrations. In addition, by performing a density functional theory study in the gas phase, the calculated geometry, the harmonic vibrational modes, and the Raman scattering activities of EC were found to be in good agreement with our experimental data and helped establish the surface‐enhanced Raman scattering (SERS) behavior and EC adsorption geometry on the silver surfaces. The Raman peak at 1006 cm⁻¹, assigned to the υ_s(CC) + ω(CH) modes, the strongest and best reproducible peak in the SERS spectra, was used for a quantitative evaluation of EC. The limit of detection, which corresponds to a signal‐to‐noise ratio equal to 3, was found to be 2 × 10⁻⁷ M (17.8 µg l⁻¹). SERS spectra obtained by using hydroxylamine hydrochloride‐reduced silver nanoparticles provide a fast and reproducible qualitative and quantitative determination of EC in aqueous solution. Copyright © 2013 John Wiley & Sons, Ltd.     

Analysis of mural paintings using in situ non‐invasive XRF,FTIR spectroscopy and optical microscopy

An analytical protocol consisting of X‐ray fluorescence spectroscopy, optical microscopy and Fourier transform infrared spectroscopy was used to study the origin and the nature of the materials (pigments, binders and coating preparation) of the Fundenii Doamnei church mural paint from Bucharest. The main interest of the present study consisted in the original votive paint from narthex, painted in 1757 in a secco technique. During analysis, an unexpected pigment in the votive paint could be detected by the combined analytical techniques: ultramarine blue. Along with this pigment, the presence of gypsum binder based on egg and flax seed oil could also be evidenced. These results demonstrated a secco execution technique of the votive paint and also the presence of a restoration treatment. Moreover, during the present study, the components of the preparation layer and the constitutive pigments from both 1699 and 1757 years mural paints have been analyzed. Hence, the following pigments could be identified: vermilion, azurite, cinnabar, lead white, ochre, natural umber and gold, by using the combination of the analytical techniques. The novelty of our results consists in detecting the composition of the materials used in this church painting (fresco and a secco) during these 254 years since its first restoration. The results of these investigations pointed to the suitability of the non‐destructive and semi‐destructive analytical techniques in the complex characterization of the paints realized in different techniques, at different periods. Copyright © 2013 John Wiley & Sons, Ltd.     

Performance of Pleurotus ostreatus Mushrooms and Spent Substrate for the Biosorption of Cd(II) From Aqueous Solution

The capacities of Pleurotus ostreatus mushroom and spent substrate were evaluated for the biosorption of cadmium (II) from aqueous solution in order to select the most efficient material for bioremediation. The optimum sorption conditions were optimized, including the pH of the aqueous solution, contact time, biomass dosage, initial metal concentration, and temperature. The sorption of cadmium on both biosorbents was also evaluated by several kinetic, equilibrium, and thermodynamic models. The possible heavy metal biosorption mechanisms were evaluated through point of zero charge (pH_pzc), Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy coupled with energy dispersive X-ray microanalysis (SEM-EDX). Based on the results of column studies, the effectiveness of the P. ostreatus spent substrate was confirmed as a biosorbent for Cd(II) removal from aqueous solutions.     

Brown HT

Journal of Thermal Analysis and Calorimetry - Thermal behavior of Brown HT food dye was studied in correlation with the physical and biological antioxidant properties. Brown HT’s structure...     

Magnetic characterization of some nanometric iron oxides

Nanosized magnetite particles embedded in polypyrrole matrix have been studied by Mössbauer and electron magnetic resonance spectroscopy. Comparison with as grown magnetite is made. Hyperfine fields distribution is determined and line shape of resonance curves are discussed in terms of composite structure, sizes and treatments.     

Iron environment in calcium-soda-phosphate glasses and vitroceramics

The structure of calcium-soda-phosphate glasses and vitroceramics with relatively high iron content was investigated by X-ray diffraction, electron paramagnetic resonance (EPR) and Mössbauer spectroscopy. The X-ray diffraction analysis proves the vitreous state of the as prepared samples and the development of crystalline phases in the annealed samples. The ferric ions disposed in sites that give rise to the absorption line with g_ef ≈ 4.3 in the EPR spectra of vitreous samples are not more evidenced in the spectra of the annealed samples, from which only of a symmetric and narrowed line with g_ef ≈ 2 is recorded. The room temperature ⁵⁷Fe Mössbauer spectra both of glass and vitroceramic samples consist of two quadrupole doublets characteristic for octahedral sites of Fe²⁺ and Fe³⁺ ions. The isomer shift for glass samples decreases and for vitroceramic samples increases with the iron oxide content.