Low temperature H2O and NO2 coadsorption on theta-Al2O3/NiAl(100) ultrathin films

The coadsorption of H(2)O and NO(2) molecules on a well-ordered, ultrathin theta-Al(2)O(3)/NiAl(100) film surface was studied using temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS), and X-ray photoelectron spectroscopy (XPS). For H(2)O and NO(2) monolayers adsorbed separately on the theta-Al(2)O(3)/NiAl(100) surface, adsorption energies were estimated to be 44.8 and 36.6 kJ/mol, respectively. Coadsorption systems prepared by sequential deposition of NO(2) and H(2)O revealed the existence of coverage and temperature-dependent adsorption regimes where H(2)O molecules and the surface NO(x) species (NO(2)/N(2)O(4)/NO(2)(-),NO(3)(-)) form segregated and/or mixed domains. Influence of the changes in the crystallinity of solid water (amorphous vs crystalline) on the coadsorption properties of the NO(2)/H(2)O/theta-Al(2)O(3)/NiAl(100) system is also discussed.     

Characterization and kinetics analysis of the thermal decomposition of the humic substance from hazelnut husk

A humic substance was obtained from hazelnut husk using an alkali extraction. The chemical and morphological structure of the humic matter was characterized via elemental analysis, Fourier transform infrared spectrometry (FTIR), nuclear magnetic resonance, Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), and thermogravimetric-FTIR (TG-FTIR). In addition, thermal analysis measurements TG analysis-differential thermogravimetry/differential scanning calorimetry (TGA-DTG/DSC) were performed under dynamic air conditions to better determine the origin, physical and chemical structure, and decomposition process of the humic matter. The Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were used to calculate the kinetic parameters of the high-temperature decomposition process. It was observed that the activation energy values were almost constant at certain conversion and temperature intervals. In addition, the structure of the humic substance at different temperatures was also investigated via FTIR analysis. It was found that the obtained humic substance had a very stable structure and decomposed at a high temperature. The stability of the humic matter can be a useful tool in the environmental quality research of soil.     

A highly sensitive detection platform based on surface-enhanced Raman scattering for Escherichia coli enumeration

A very sensitive and highly specific heterogeneous immunoassay system, based on surface-enhanced Raman scattering (SERS) and gold nanoparticles, was developed for the detection of bacteria and other pathogens. Two different types of gold nanoparticles (citrate-stabilized gold nanosphere and hexadecyltrimethylammonium bromide (CTAB)-stabilized gold nanorod particles) were examined and this immunoassay was applied for the detection of Escherichia coli. Raman labels were constructed by using these spherical and rod-shaped gold nanoparticles which were first coated with 5,5′-dithiobis(2-nitrobenzoic acid) (DTNB) and subsequently with a molecular recognizer. The working curve was obtained by plotting the intensity of the SERS signal of the symmetric NO₂ stretching of DTNB at 1,333 cm⁻¹ versus the concentration of the E. coli. The analytical performance of gold particles was evaluated via a sandwich immunoassay, and linear calibration graphs were obtained in the E. coli concentration range of 10¹–10⁵ cfu/mL with a 60-s accumulation time. The sensitivity of the Raman label fabricated with gold nanorods was more than three times higher than spherical gold nanoparticles. The selectivity of the developed sensor was examined with Enterobacter aerogenes and Enterobacter dissolvens, which did not produce any significant response. The usefulness of the developed immunoassay to detect E. coli in real water samples was also demonstrated.     

Cationic and neutral ruthenium(II) complexes containing both arene or Cp* and functionalized aminophosphines. Application to hydrogenation of aromatic ketones

Hydrogen transfer reduction processes are attracting increasing interest from synthetic chemists in view of their operational simplicity. For this aim, a series of novel Ru(II) complexes with the P-N-P ligands were synthesized starting from the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ or [RuCp*Cl(COD)]. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. Complexes 5, 6 and 7 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. Catalytic studies showed that all complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 5 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ≤ 492 h⁻¹).     

Ruthenium complexes of aminophosphine ligands and their use as pre-catalysts in the transfer hydrogenation of aromatic ketones: X-ray crystal structure of thiophene-2-(N-diphenylthiophosphino)methylamine

Reaction of thiophene-2-methylamine with one or two equivalents of PPh₂Cl in the presence of NEt₃, proceeds in thf to give thiophene-2-(N-diphenylphosphino)methylamine, 1a and thiophene-2-(N,N-bis(diphenylphosphino))methylamine, 2a respectively, under anaerobic conditions. Oxidations of 1a and 2a with aqueous hydrogen peroxide, elemental sulfur or gray selenium in thf gives the corresponding oxides, sulfides and selenides [Ph₂P(E)NHCH₂-C₄H₃S] (E: O 1b, S 1c, Se 1d) and [(Ph₂P(E))₂NCH₂-C₄H₃S], (E: O 2b, S 2c, Se 2d) respectively, in high yield. Furthermore, two novel Ru(II) complexes with the P-N ligands 1a and 2a were synthesized starting with the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. The molecular structure of thiophene-2-(N-diphenylthiophosphino)methylamine was also elucidated by single-crystal X-ray crystallography. Following activation by NaOH, compounds 3 and 4 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 3 and [Ru((PPh₂)₂NCH₂-C₄H₃S)(η⁶-p-cymene)Cl]Cl, 4 complexes are suitable catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 4 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ? 744 h⁻¹). This transfer hydrogenation is characterized by low reversibility under the experimental conditions.     

Use of graphite oxide and graphene oxide as catalysts in the synthesis of dipyrromethane and calix[4]pyrrole

Graphite oxide and graphene oxides have been used as solid catalysts for the synthesis of 5,5-dialkyldipyrromethanes and calix[4]pyrroles in organic and aqueous solutions at room temperature.     

Quantum chemical computational studies on 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester

The optimized molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) (1)H and (13)C NMR shift values of 5-(4-bromophenylamino)-2-methylsulfanylmethyl-2H-1,2,3-triazol-4-carboxylic acid ethyl ester have been calculated by using Hartree-Fock (HF) and density functional method (DFT/B3LYP) with 6-31G(d), 6-31G(d,p) and LANL2DZ basis sets. The optimized molecular geometric parameters were presented and compared with the data obtained from X-ray diffraction. In order to fit the calculated harmonic wavenumbers to the experimentally observed ones, scaled quantum mechanics force field (SQM FF) methodology was proceeded. Correlation factors between the experimental and calculated (1)H chemical shift values of the title compound in vacuum and in CHCl(3) solution by using the conductor-like screening continuum solvation model (COSMO) were reported. The calculated results showed that the optimized geometry well reproduces the crystal structure. The theoretical vibrational frequencies and chemical shifts are in very good agreement with the experimental data. In solvent media the energetic behavior of the title compound was also examined by using the B3LYP method with the 6-31G(d) basis set, applying the COSMO model. The obtained results indicated that the total energy of the title compound decreases with increasing polarity of the solvent. Furthermore, molecular electrostatic potential (MEP), natural bond orbital (NBO) and frontier molecular orbitals (FMOs) of the title compound were performed by the B3LYP/LANL2DZ method, and also thermodynamic parameters for the title compound were calculated at all the HF and B3LYP levels.     

The synthesis and characterization of copper(II)–<Emphasis Type="Italic">p</Emphasis>-aminosalicylate complexes with diamine ligands

The complexes were synthesized by the reaction between sodium salt of p-aminosalicylic acid (PAS) and Cu(II) for 1 and corresponding ethylenediamine (en) or its derivatives for 2–6. The complexes were characterized by using elemental analyses, FT-IR, UV–Vis, magnetic moment measurements, and thermal analyses techniques. In complex 1[Cu₂(PA)₄(H₂O)₂], two Cu(II) ions were found as bridged by four μ-O:O′ p-aminosalicylato (PA) ligands, forming a cage structure, and two aqua ligands to form dinuclear square-pyramidal geometry around Cu(II) ions. In the complexes 2–6, the PA (anionic form of p-aminosalicylic acid) coordinated to Cu(II) ions as monodentate manner by using its oxygen atom of deprotonated carboxylic acid and ethylenediamine derivatives coordinated to the Cu(II) ions in bidentate manner to form mononuclear octahedral complexes [Cu(PA)₂(L)₂] (L = ethylendiamine, N,N-dimethylethylendiamine, N,N′-dimethylethylendiamine, N,N,N′,N′-tetramethylethylendiamine, and 1,3-propanediamine, for complexes 2, 3, 4, 5, and 6, respectively). In all the complexes OH and NH₂ groups of PA ligands were not coordinated to metals.     

Stereoconvergent Generation of a Contrasteric syn‐Bicyclopropylidene (=syn‐Cyclopropylidenecyclopropane) by Stille‐Like Coupling

Stereoisomerically pure endo‐ and exo‐7‐halo‐7‐(trimethylstannyl)benzonorcar‐3‐enes (=endo‐ and exo‐(1‐halo‐1a,2,7,7a‐tetrahydro‐1H‐cyclopropa[b]naphthalen‐1‐yl)trimethylstannane) 4 and 6 were selectively obtained by lithium? tin or magnesium? tin transmetalation in good yields (Scheme 2 and 3). The reaction of these compounds with copper(I) thiophene‐2‐carboxylate (CuTC) produced in both cases the corresponding C_S‐symmetric bicyclopropylidene (=cyclopropylidenecyclopropane) syn‐ 1 , a single diastereoisomer (Schemes 5 and 6). The structure of syn‐ 1 was undoubtedly elucidated by X‐ray single crystal diffraction. The coupling mechanism of the carbenoid cyclopropane is discussed (Scheme 7).     

Synthesis of H‐shaped complex macromolecular structures by combination of atom transfer radical polymerization,photoinduced radical coupling,ring‐opening polymerization,and iniferter processes

Three controlled/living polymerization processes, namely atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP) and iniferter polymerization, and photoinduced radical coupling reaction were combined for the preparation of ABCBD‐type H‐shaped complex copolymer. First, α‐benzophenone functional polystyrene (BP‐PS) and poly(methyl methacrylate) (BP‐PMMA) were prepared independently by ATRP. The resulting polymers were irradiated to form ketyl radicals by hydrogen abstraction of the excited benzophenone moieties present at each chain end. Coupling of these radicals resulted in the formation of polystyrene‐b‐poly(methyl methacrylate) (PS‐b‐PMMA) with benzpinacole structure at the junction point possessing both hydroxyl and iniferter functionalities. ROP of ε‐caprolactone (CL) by using PS‐b‐PMMA as bifunctional initiator, in the presence of stannous octoate yielded the corresponding tetrablock copolymer, PCL‐PS‐PMMA‐PCL. Finally, the polymerization of tert‐butyl acrylate (tBA) via iniferter process gave the targeted H‐shaped block copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4601–4607