Infrared ellipsometry study of the oxidation mechanisms of hydrogenated amorphous silicon

A detailed study of the oxidation of plasma deposited amorphous silicon (a-Si : H) using infrared phase modulated ellipsometry (IRPME) is presented. a-Si : H is found to be resistant against air oxidation confirming previous measurements. A 5–6 Å thick oxide layer at the surface of a-Si : H is observed after a few months of exposure to air. The extreme sensitivity of IRPME is emphasized. In particular Si-O-Si and (O_n)Si-H stretching vibrations are identified at the film surface at the submonolayer level. The oxidation mechanisms are discussed. The weak reactivity of a-Si : H with atmosphere is correlated with the presence of a hydrogen rich thin layer at the top surface.     

Research problem

This section appears from time to time. Contributions are invited, and should be submitted to R C. Thompson, Mathematics Department. University of California, Santa Barbara, CA93106-3080, USA.     

Direction of magnetization and domain wall mobility in (Dy,Y)Fe2

Magnetization measurements in the (Dy _x Y_1−x )Fe₂ intermetallic compounds show evidence of blocking of domain wall motion. This effect is a function of concentrationx. The direction of magnetization is also dependent on the Dy concentration. We have used the Mossbauer spectroscopy of⁵⁷Fe to verify the direction of magnetization in the series as a function ofx and temperature. The results show that this change in easy direction occurs at higher temperatures than those where the blocking is detected through DC magnetization measurements. supported by RHAE/SCT.     

Deuterium NMR studies of inositol liquid crystals [1]

Deuterium NMR investigations are presented on members of two new mesogenic series derived from the naturally occurring stereoisomers myo- and scW/o-inositol. Tetraethers of these two series exhibit thermotropic columnar phases in which the columns are apparently formed by stacked hydrogen bonded dimers of these molecules which chemically are vicinal diols. Deuterium NMR measurements were performed on the tetraoctyl homologues 2e (a cis diol) and 3e (a trans diol) of these series. We have investigated mixtures of these diols with small amounts of benzene-d₆ as probe molecules as well as samples of the neat diol compounds deuteriated at their hydroxyl groups. The results obtained show that the mesophases of both compounds are uniaxial and align partially in a magnetic field upon slow cooling from their isotropic liquids. The alignment is with the director parallel to the field direction indicating that the anisotropic magnetic susceptibility of this mesophase is positive. The deuterium quadrupole splitting of the benzene-d₆ probe in both systems is temperature dependent and in the trans diol 3e it even changes sign. This is interpreted in terms of a model in which the benzene-d₆ probe equilibrates rapidly between two (or more) solvation sites with quadrupole splittings of opposite signs The deuterium spectra of the neat deuterium labelled cis diol 2e exhibit two different signals due to the two deuterons which are located at the axial and equatorial hydroxyl groups. This indicates that there is no fast intra- or intermolecular exchange of the hydroxyl hydrogens. The overall quadrupole splittings of the hydroxyl deuterons in this compound are highly reduced compared to their static values and this is interpreted in terms of motional modes involving both reorientation of the hydroxyl deuterons about their C-O axis and overall reorientation of the molecules (or pairs of molecules) around the columnar axes. The corresponding spectra of the neat deuteriated trans diol 3e exhibit a single spectrum indicating that both hydroxyl deuterons in this compound are equivalent, or very nearly so. Within the mesophase region the spectrum undergoes gradual changes due to the increase in the molecular mobility, but the overall motional narrowing is less than in the cis isomer 2e. Apparently due to stronger hydrogen bonding in the trans isomer 3e the precession of the hydroxyl groups is hindered and a fast molecular reorientation is only possible at high temperatures.     

Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Conversion of single-stranded oligonucleotides into cloned duplexes and its consecutive application to short artificial genes.

A general method to convert single-stranded, chemically synthesized oligonucleotides into cloned duplexes is described. Oligonucleotides supplied with 3'-terminal extensions that are complementary to 3'-protruding ends obtained by certain restriction enzymes can be cloned either directly or with the help of an adapter molecule into double-stranded vectors. Two methods have also been developed for consecutive cloning applications. According to these methods, the synthetic oligonucleotides (and their enzymatically prepared complementary strands) are joined, one after the other, inside a cloning vector, each joining requiring one cloning step. Synthetic genes are thus built up from oligonucleotides corresponding to only one strand of the DNA. The sequential assembly of the cloned duplex takes place in the 5' to 3' direction. Each oligonucleotide is supplied with a four-nucleotide-long 3'-terminal extension, but this sequence is eliminated when the joining takes place, leaving no limiting sequence between the oligonucleotides. The two consecutive cloning methods, the adapter and the polycloning site methods, are illustrated by the assembly of short artificial genes.     

Transport properties of a side-chain liquid-crystalline polymer. Poly(4-acryloyloxy biphenyl)

The transport properties of a side-chain liquid-crystalline polymer forming a smectic A phase have been investigated using dichloromethane as a permeant. Samples differing in the isotropization enthaoly were analyzed. A. Correlation between this thermal parameter and sorption has been found, while the diffusion coefficient is substantially the same in all samples. The results obtained can be explained in terms of a biphasis model in which a disordered permeable phase is present within the liquid-crystalline phase, which is impermeable to the diffusant molecules.     

Measurements of the perpendicular width of ionization-produceddouble layers

Measurements of the perpendicular (to B) double-layer widths of ionization-produced (anode) double layers are presented. These widths were determined from measurements of the double-layer charge separations. The variations of the transverse-to-B widths with plasma density and magnetic field strength are given     

Effects of saturation on optical bistability with coupled surface plasmons

We present exact numerical results for a symmetric layered medium (prism/Ag film/nonlinear dielectric/Ag film/prism) where the middle dielectric slab is assumed to have a saturation-type nonlinearity. We show bistable behaviour in the power dependence of the reflectivity ofp-polarized light under the condition when coupled surface modes are excited in the structure. Moreover, we study the effect of saturation on the bistable behaviour to show that multivalued character is inhibited by saturation effects. The field distributions corresponding to the minimum reflectivity states of the nonlinear structure are also presented.