X-ray diffraction study of the fatigue behavior of a shot-peened aluminum-lithium alloy

The effect of different shot-peening treatments on the cyclic fluctuating bending fatigue behavior of a new aluminum-lithium alloy (the 2091) has been investigated. The residual-stresses in-depth profiles have been defined just after the shot peening using mainly the X-ray diffraction method. To reach a given depth inside the material, the surface layer was removed by electro-polishing. The acquired data had to be then corrected in order to account for the redistribution of the stresses during the polishing. Furthermore, this alloy contains up to 15-percent intermetallic precipitates. Moreover, the X-rays penetrate deeply inside the material (23 m). For these reasons, a special procedure, based on a self-consistent micromechanical scheme, has been developed to correct the acquired data. The stress profiles obtained by this procedure are compared to those obtained by other mechanical experimental methods and those calculated by a theoretical shot-peening method. Shot peening improves the life of the material but the surface residual stresses are partially released during the first cycles of fatigue and are then quickly stabilized.Paper was presented at the 1994 SEM International Conference on Residual Stresses (ICRS4) held in Baltimore, MD on June 8–10.     

Neue Näherungsgleichung zur einheitlichen Berechnung von Wärmeübertragern

Zusammenfassung Es wird eine für alle Stromführungen einheitliche Näherungsgleichung mit drei oder vier anpaßbaren Parametern zur Berechnung des Korrekturfaktors für die mittlere logarithmische Temperaturdifferenz angegeben. Die anpaßbaren Parameter wurden für etwa 50 verschiedene Stromführungen durch Ausgleichsrechnung bestimmt. Die Genauigkeit der Gleichung ist für die Berechnung im praktisch wichtigen Bereich mehr als ausreichend.

---

New approximate equation for uniform heat exchanger design

An approximate equation with three or four empirical parameters for the uniform calculation of the LMTD-correction factor of all heat exchanger configurations is proposed. The empirical parameters have been determined for about 50 different flow configurations using least squares estimation. The accuracy of the equation is more than sufficient for practical design purposes.

---

Formelzeichen A Übertragungsfläche - a, b, c, d Parameter der Näherungsgleichung - Wärmekapazitätsstrom - F Korrekturfaktor für die logarithmische mittlere Temperaturdifferenz - k Wärmedurchgangskoeffizient - m, n Zahl der Durchgänge oder Einzelapparate - NTU Anzahl der Übertragungseinheiten (number of transfer units); NTU_i=kA/ _i - P dimensionslose Temperaturänderung - R Wärmekapazitätsstromverhältnis;R ₁=₁/₂;R ₂=₂/₁ - relativer Fehler - Mittelwert von NTU₁ und NTU₂ Indizes 1, 2 Stoffstrom 1, 2 - G Gegenstrom - s Schätzwert Herrn Prof. Dr.-Ing. E.h. K. Stephan zum 65. Geburtstag gewidmet.     

Hybrid extension of Schottky space

Part of this work was written while the author was feliow of the Graduiertenkolleg Geometrie und Mathematische Physik at the University of Bochum, Germany.     

Method for symmetrization and estimation of solutions of the Neumann problem for the equation of a porous medium in domains with noncompact boundary for infinitely increasing time

We consider the initial boundary-value Neumann problem for the equation of a porous medium in a domain with noncompact boundary. By using a symmetrization method, we obtain exactL _p-estimates, 1p, for solutions as t.Translated from Ukrainskii Matematicheskii Zhurnal, Vol. 47, No. 2, pp. 147–157, February, 1995.     

Canonical property of the Miura maps between the MKP and KP hierarchies,continuous and discrete

Apart from the case of the KP hierarchy, all known Miura maps between integrable Hamiltonian systems had been proven to be canonical. The remaining KP case is settled below. As a corollary, it is shown that the KP hierarchy is a factor — hierarchy of the mKP one, with the kernel consisting of a single scalar field. A discrete mKP hierarchy and the associated Miura map are constructed, and the latter is shown to be canonical as well. As in the continuous case, this implies that one can extend the discrete KP hierarchy by a single new field into an extended discrete KP hierarchy in such a way that the extended discrete Miura map mKPeKP is a canonical isomorphism.     

On asymptotic cones and quasi-isometry classes of fundamental groups of 3-manifolds

We apply the concept of asymptotic cone to distinguish quasi-isometry classes of fundamental groups of 3-manifolds. We prove that the existence of a Seifert component in a Haken manifold is a quasi-isometry invariant of its fundamental group.This research was partially supported by the grant SFB 256 Nichtlineare partielle Differentialgleichungen and the NSF grant DMS-9306140 (Kapovich).     

Determination of the atmospheric neutrino spectra with the Fréjus detector

The combined analysis of the final event set of data on neutrino interactions inside the detector, upward going stopping muons and horizontal muons recorded in the Fréjus experiment is presented. The absolute atmospheric neutrino spectra in the energy range for electron neutrinos and for muon neutrinos are determined. Based on the parameterization of Volkova for thev ^µ a spectral index of =2.66±0.05 is obtained from the ratio of horizontal muons over upward going stopping muons and from the measurement of the energy loss of horizontal muons inside the detector. The neutrino spectra are compared with various flux calculations. They do not show any evidence for neutrino oscillations in agreement with earlier analyses of the Fréjus data.Now atUniversity of Michigan, Ann Arbor, USA     

Full-wave analysis of waveguide-to-microstrip transitions for millimeter wave applications

A full-wave solution is presented for the waveguide to microstrip transition. The exact Green's function of the transition is used in a moment method procedure. The behavior of the microstrip transition to a rectangular waveguide is studied with respect to the critical dimensions of the microstrip width, length and backshort location. The convergence characteristics of the full wave analysis method are investigated, along with the current distribution and the input impedance. Results given for the return loss is compared with measurements.     

Piezoelectric sound generation and detection at 70 GHz using the technique of linear frequency modulation of a continuous wave

The method of linear frequency modulation of a continuous wave (FM-CW) in sound-echo experiments is demonstrated at a sound frequency of 70 GHz. A reflex klystron with a cw power of only 300 mW and a planar Hertzian resonator are used for the piezoelectric sound excitation. Applying homodyne detection, spectral echo signals are detected in the kHz range by means of a spectral analyzer. The detected echoes show an excellent signal-to-noise ratio. Details of the experimental setup and the underlying theory of the FM-CW sound experiments are presented. We observe experimentally two excited needle-like sound beams in 65 m distance, each about 30 m in diameter.