A redox-active ionic liquid manifesting charge-transfer interaction between a viologen and carbazole and its effect on the viscosity,ionic conductivity,and redox process of the viologen

Redox-active ionic liquids (RAILs) are gaining attention as a material that can create a wide range of functions. We herein propose a charge-transfer (CT) RAIL by mixing two RAILs, specifically a carbazole-based ionic liquid ([CzC₄ImC₁][TFSI]) as a donor and a viologen-based ionic liquid ([C₄VC₇][TFSI]₂) as an acceptor. We investigated the effect of CT interaction on the physicochemical properties of the CT ionic liquid (CT-IL) using the results of temperature-dependent measurements of UV-vis absorption, viscosity, and ionic conductivity as well as cyclic voltammograms. We employed the Walden analysis and the Grunberg–Nissan model to elucidate the effect of the CT interaction on the viscosity and ionic conductivity. The CT interaction reduces the viscosity by reducing the electrostatic attraction between the dicationic viologen and TFSI anion. It also reduces the ionic conductivity by the CT association of the dicationic viologen and carbazole. The electrochemically reversible responses of the viologens in [C₄VC₇][TFSI]₂ and CT-IL are consistent with the Nernstian and the interacting two-redox site models. Notably, the transport and electrochemical properties are modulated by CT interaction, leading to unique features that are not present in individual component ILs. The inclusion of CT interaction in RAILs thus provides a powerful means to expand the scope of functionalized ionic liquids.

A redox-active ionic liquid (RAIL) consisting of a carbazole and viologen shows charge transfer (CT) interaction. The physicochemical properties are modulated by the CT interaction by comparison with the individual RAILs.     

Micromachined Enzyme Reactor for FIA System

An enzyme reactor consisting of a 2.6-m-long silicon capillary with glucose oxidase immobilized on the inner surface was fabricated using micromachining techniques. A V-shaped groove of 100 μm width, formed by anisotropic etching, was anodically bonded to a glass plate to create the capillary. Glucose oxidase was covalently immobilized with 3-aminopropyltriethoxysilane and glutaraldehyde. The reactor was evaluated by connecting it to a Flow injection analysis system for glucose detection. Glucose concentrations were in the range of 10⁻³ to 5 × 10⁻²M with a volume of 0.2 μl of glucose solution.     

Characterization of cationic acid phosphatase isozyme from rat liver mitochondria.

Acid phosphatase isozyme was highly purified from rat liver mitochondrial fraction. The enzyme showed an isoelectric point value of above 9.5 on isoelectric focusing, and the apparent molecular weight was estimated to be 32000 by Sephadex G-100 gel filtration or 16000 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The enzyme catalyzed the hydrolysis of adenosine 5'-triphosphate, adenosine 5'-diphosphate, thiamine pyrophosphate, inorganic pyrophosphate, and phosphoprotein such as casein and phosvitin, but not of several phosphomonoesters, except for p-nitrophenyl phosphate and o-phosphotyrosine. The enzyme was not inhibited by L-(+)-tartrate, and was significantly activated by Fe2+ and reducing agents such as ascorbic acid, L-cysteine,and dithiothreitol. The enzyme was found to be distributed in various rat tissues including liver, spleen, kidney, small intestine, lung, stomach, brain and heart, but not in skeletal muscle.     

Liquid-liquid extraction of copper(I) by cyclic tetrathio ethers

The liquid-liquid extraction of copper(I) with 12-, 13-, 15- and 16-membered cyclic tetrathio ethers ([n]aneS₄, where n represents the total number of carbon and sulphur atoms in the cyclic ligand ring) was examined stoichiometrically using picrate ion (Pic^?) for the formation of the ion pair. Copper(I) was extracted with four ligands (L) into 1,2-dichloroethane as the ion-pair compound, [Cu(I)L]⁺Pic^?. The extraction constant, K_ex, with each ligand was determined. As the ring size of cyclic tetrathio ethers increases, the log K_ex values, including that previously reported for [14]aneS₄, increase from 7.7 to 9.4. The value of Δ log K_ex, which represents the increase in log K_ex due to the addition of one carbon atom to the macrocyclic ring, was large between [13]aneS₄ and [14]aneS₄ (Δ log K_ex=1.0) and small between [14]aneS₄ and [15]aneS₄ (Δ log K_ex=0.1).     

Synthesis of directly linked zinc(II) porphyrin-imide dyads and energy gap dependence of intramolecular electron transfer reactions

A series of zinc(II) porphyrin-imide dyads (ZP-Im), in which an electron donating ZP moiety is directly connected to an electron accepting imide moiety in the meso position, have been prepared for the examination of energy gap dependence of intramolecular electron transfer reactions with large electronic coupling. The nearly perpendicular conformation of the imide moiety towards the porphyrin plane has been revealed by Xray crystal structures. The energy gap for charge separation, 1ZP* - Im --> ZP+ - Im-, is varied by changing the electron accepting imide moiety to cover a range of about 0.8 eV in DMF. Definitive evidence for electron transfer has been obtained in three solvents (toluene, THF, and DMF) through picosecond-femtosecond transient absorption studies, which have allowed us to determine the rates of photoinduced charge separation, 1ZP* - Im --> ZP+ - Im-, and subsequent thermal charge recombination ZP+ - Im- --> ZP - Im. The free-energy gap dependence (energy gap law) has been probed from the normal to the nearly top region for the charge separation rate alone, and only the inverted region for the charge recombination rate. Although both of the energy gap dependencies can be approximately reproduced by means of the simplified semiclassical equation, when we take into consideration the effect of the high frequency vibrations replaced by one mode of averaged frequency, many features, including the effects of solvent polarity and the electron tunneling matrix element on the energy gap law, differ considerably from those of the previously studied porphyrin-quinone systems, which have weaker interchromophore electronic interactions.     

Electrical and magnetic properties of ion-exchangeable layered ruthenates

An ion-exchangeable ruthenate with a layered structure, K_0.2RuO_2.1, was prepared by solid-state reactions. The interlayer cation was exchanged with H⁺, C₂H₅NH₃⁺, and ((C₄H₉)₄N⁺) through proton-exchange, ion-exchange, and guest-exchange reactions. The electrical and magnetic properties of the products were characterized by DC resistivity and susceptibility measurements. Layered K_0.2RuO_2.1 exhibited metallic conduction between 300 and 13 K. The products exhibited similar magnetic behavior despite the differences in the type of interlayer cation, suggesting that the ruthenate sheet in the protonated form and the intercalation compounds possesses metallic nature.     

Enantioface-selective palladium-catalyzed silaboration of allenes via double asymmetric induction

Enantioenriched beta-borylallylsilanes were synthesized by palladium-catalyzed enantioface-selective addition of the silicon-boron bond to terminal allenes using a palladium catalyst possessing a chiral monodentate phosphine ligand. Use of a silylborane bearing a chiral auxiliary on the boron atom was beneficial to gain enantioface selectivities as high as 96% de.     

A novel synthesis of α-hydroxy- and α,α′-dihydroxyketone from α-iodo and α,α′-diiodo ketone using photoirradiation

A novel reaction of α-iodo ketone (α-iodocycloalkanone, α-iodo-β-alkoxy ester, and α-iodoacyclicketone) with irradiation under a high-pressure mercury lamp gave the corresponding α-hydroxyketone in good yields. In the case of α,α′-diiodo ketone, α,α′-dihydroxyketone which little has been reported until now was obtained. This reaction affords a new, clean and convenient synthetic method for α-hydroxy- and α,α′-dihydroxyketone.     

Effect of omega-hydrogenation on the adsorption of fluorononanols at the hexane/water interface: pressure effect on the adsorption of fluorononanols

The interfacial tension gamma of the hexane solution of 1H,1H-perfluorononanol (FDFC(9)OH) and its omega-hydrogenated analogue, 1H,1H,9H-perfluorononanol (HDFC(9)OH), against water was measured as a function of pressure and concentration at 298.15 K in order to clarify the effect of omega-dipole on the orientation of fluorononanol molecules from the viewpoint of volume. The adsorbed films of both alcohols exhibit two kinds of phase transitions among three different states: the gaseous, expanded, and condensed states. The partial molar volume changes of adsorption - in the expanded and condensed states were evaluated and compared between the two systems. The - values of both alcohols are negative, and thus the alcohol molecules have smaller volume in the adsorbed film than in the bulk solution. Furthermore, the value was obtained through the evaluation of by the density measurement of the bulk hexane solution. It was found that the value of HDFC(9)OH is smaller than that of FDFC(9)OH in the condensed state. On the basis of three matters concerning the molecular structure of alcohols, the occupied area at the interface, and the orientation of FDFC(9)OH in the adsorbed film deduced from the earlier results of X-ray reflectivity measurement, the mean tilt angle of HDFC(9)OH from the interface normal in the condensed film was estimated to be 15 degrees . The thermodynamic estimation demonstrated here is highly valuable one to provide structure information on an adsorbed film.