Polarity determination of wurtzite-type crystals using hard x-ray photoelectron diffraction

The surface structure of a single-crystal ZnO wafer was studied by angle-resolved x-ray photoelectron spectroscopy (ARXPS) using synchrotron radiation. As a result, well-defined x-ray photoelectron diffraction (XPD) patterns were obtained for the (0001) and (000$\overline{1}$) polar surfaces using the photoemission from the Zn 2p_3/2 and O 1s core levels. The XPD patterns were indexed assuming forward scattering of photoelectrons by neighboring ions. Further, the XPD patterns for the (0001) and (000$\overline{1}$) surfaces were different from each other, indicating the possibility for using the XPD technique for polarity determination.     

Development of a 64 channel ultrasonic high frequency linear array imaging system

In order to improve the lateral resolution and extend the field of view of a previously reported 48 element 30 MHz ultrasound linear array and 16-channel digital imaging system, the development of a 256 element 30 MHz linear array and an ultrasound imaging system with increased channel count has been undertaken. This paper reports the design and testing of a 64 channel digital imaging system which consists of an analog front-end pulser/receiver, 64 channels of Time-Gain Compensation (TGC), 64 channels of high-speed digitizer as well as a beamformer. A Personal Computer (PC) is used as the user interface to display real-time images. This system is designed as a platform for the purpose of testing the performance of high frequency linear arrays that have been developed in house. Therefore conventional approaches were taken it its implementation. Flexibility and ease of use are of primary concern whereas consideration of cost-effectiveness and novelty in design are only secondary. Even so, there are many issues at higher frequencies but do not exist at lower frequencies need to be solved. The system provides 64 channels of excitation pulsers while receiving simultaneously at a 20–120 MHz sampling rate to 12-bits. The digitized data from all channels are first fed through Field Programmable Gate Arrays (FPGAs), and then stored in memories. These raw data are accessed by the beamforming processor to re-build the image or to be downloaded to the PC for further processing. The beamformer that applies delays to the echoes of each channel is implemented with the strategy that combines coarse (8.3 ns) and fine delays (2 ns). The coarse delays are integer multiples of the sampling clock rate and are achieved by controlling the write enable pin of the First-In-First-Out (FIFO) memory to obtain valid beamforming data. The fine delays are accomplished with interpolation filters. This system is capable of achieving a maximum frame rate of 50 frames per second. Wire phantom images acquired with this system show a spatial resolution of 146 μm (lateral) and 54 μm (axial). Images with excised rabbit and pig eyeball as well as mouse embryo were also acquired to demonstrate its imaging capability.     

Palladium catalyzed asymmetric sulfonylation mediated chiral β-hydroxy- and β-(o-diphenylphosphino)benzoyloxy (o-diphenyl phosphino)benzamides

The palladium catalyzed asymmetric allylic sulfonylation reaction has been investigated employing β-hydroxy- and β-(o-diphenylphosphino)benzoyloxy (o-diphenyl phosphino)benzamides as chiral, non-racemic ligands. The bisphosphine β-benzoyloxybenzamide ligands proved to be the best ligands for this process. Competitive transition states for the (1S,2R)-norephedrine derived ligand 14 are compared and a rationale is provided for the observed enantioselectivities.     

Reaction of acetylated carbohydrates with trimethylaluminum: concise synthesis of 1,2-O-isopropylidene d-ribofuranose

Treatment of β-d-ribose tetraacetate with trimethylaluminum gives α-3,5-O-acetyl-1,2-O-isopropylidene-d-ribofuranoside in excellent yield. This reaction allows for efficient and high-yielding installation of the 1,2-isopropylidene acetal (acetonide), which is difficult to prepare using more traditional acid-catalyzed methods. The reaction of trimethylaluminum with other per-acetylated carbohydrates is also described.     

Structural models in consumer credit

We propose a structural credit risk model for consumer lending using option theory and the concept of the value of the consumer’s reputation. Using Brazilian empirical data and a credit bureau score as proxy for creditworthiness we compare a number of alternative models before suggesting one that leads to a simple analytical solution for the probability of default. We apply the proposed model to portfolios of consumer loans introducing a factor to account for the mean influence of systemic economic factors on individuals. This results in a hybrid structural-reduced-form model. And comparisons are made with the Basel II approach. Our conclusions partially support that approach for modelling the credit risk of portfolios of retail credit.     

Chemical Evolution of a Bacterial Proteome

We have changed the amino acid set of the genetic code of Escherichia coli by evolving cultures capable of growing on the synthetic noncanonical amino acid L ‐β‐(thieno[3,2‐b]pyrrolyl)alanine ([3,2]Tpa) as a sole surrogate for the canonical amino acid L ‐tryptophan (Trp). A long‐term cultivation experiment in defined synthetic media resulted in the evolution of cells capable of surviving Trp→[3,2]Tpa substitutions in their proteomes in response to the 20 899 TGG codons of the E. coli W3110 genome. These evolved bacteria with new‐to‐nature amino acid composition showed robust growth in the complete absence of Trp. Our experimental results illustrate an approach for the evolution of synthetic cells with alternative biochemical building blocks.     

Transport of airborne particulate matters originating from Mentougou, Beijing, China

In this study, a coupled regional air quality modeling system is applied to investigate the time spatial variations in airborne particulate matters （PM10）, originating from Mentougou to Beijing municipal area in the period of April 1-7, 2004, and the influences of complex terrain and meteorological conditions upon boundary layer structure and PM10 concentration distributions. An intercomparison of the performance with CALPUFF against the observed data is presented and an examination of scatter plots is provided. The statistics show that the correlation coefficient and STD between the modeled and observed data are 0.86 and 0.03, respectively. Analysis of model results illustrates that the pollutants emitted from Mentougou can be transported to Beijing municipal area along certain transport pathways, and PM10 concentration distributions show heterogeneity characteristics. Contributions of the Mentougou sources to the PM10 concentrations in Beijing municipal area are up to 0.1-15 μg/m^3.     

Nanocontact electrification: patterned surface charges affecting adhesion, transfer, and printing

Contact electrification creates an invisible mark, overlooked and often undetected by conventional surface spectroscopic measurements. It impacts our daily lives macroscopically during electrostatic discharge and is equally relevant on the nanoscale in areas such as soft lithography, transfer, and printing. This report describes a new conceptual approach to studying and utilizing contact electrification beyond prior surface force apparatus and point-contact implementations. Instead of a single point contact, our process studies nanocontact electrification that occurs between multiple nanocontacts of different sizes and shapes that can be formed using flexible materials, in particular, surface-functionalized poly(dimethylsiloxane) (PDMS) stamps and other common dielectrics (PMMA, SU-8, PS, PAA, and SiO(2)). Upon the formation of conformal contacts and forced delamination, contacted regions become charged, which is directly observed using Kelvin probe force microscopy revealing images of charge with sub-100-nm lateral resolution. The experiments reveal chemically driven interfacial proton exchange as the dominant charging mechanism for the materials that have been investigated so far. The recorded levels of uncompensated charges approach the theoretical limit that is set by the dielectric breakdown strength of the air gap that forms as the surfaces are delaminated. The macroscopic presence of the charges is recorded using force-distance curve measurements involving a balance and a micromanipulator to control the distance between the delaminated objects. Coulomb attraction between the delaminated surfaces reaches 150 N/m(2). At such a magnitude, the force finds many applications. We demonstrate the utility of printed charges in the fields of (i) nanoxerography and (ii) nanotransfer printing whereby the smallest objects are ～10 nm in diameter and the largest objects are in the millimeter to centimeter range. The printed charges are also shown to affect the electronic properties of contacted surfaces. For example, in the case of a silicon-on-insulator field effect transistors are in contact with PDMS and subsequent delamination leads to threshold voltage shifts that exceed 500 mV.     

Spatially resolved sources of dark current from TiO2 nanoparticle electrodes

The properties of TiO(2) and polyphenyl oxide (PPO) blocking layers were compared using a highly positive redox shuttle in dye-sensitized solar cells. The dark current versus applied potential curve was found to be composed of two separate current features. Cyclic voltammetric and impedance measurements were performed to identify the source of the two features. The first feature results from electron transfer from the TiO(2) blocking layer and the first layer of the TiO(2) nanoparticle film contacting the substrate. The second onset of dark current results from the transport resistance in the nanoparticle film decreasing, thus allowing electron transfer to occur throughout the film. It is further demonstrated that PPO prevents back electron transfer from the conductive substrate to the redox shuttle across the entire potential range studied; however, the TiO(2) blocking layer is active and participates in electron transfer at rates similar to those of the TiO(2) nanoparticle film.     

Centrifugally-driven sample extraction, preconcentration and purification in microfluidic compact discs

Centrifugally-driven microfluidic compact discs (μ-CDs) have attracted significant interest within the analytical science community in the past decade, with the primary focus on the potential of such platforms for performing parallel and/or multiplex biological assays and further application in biomedical diagnostics. More recently, μ-CD-based devices were also applied to environmental analysis as platforms for multi-sample extraction and transportation, prior to off-disc analysis in the laboratory. This review critically summarizes recent developments in μ-CD platforms for sample extraction, preconcentration, fractionation and purification in bioanalytical and environmental applications. We also summarize the common methods employed in the fabrication of μ-CD platforms. Further, we discuss preparation of stationary phases in microfluidic channels embedded in μ-CDs, as applications of μ-CDs in sample extraction are generally based on enclosed series of extraction phases and microcolumns.