Zur Kenntnis der RbNiCrF6Typs. III. Neue Fluoride des Typs CsZnMF6 mit M = Al,Ga, In,Tl, Sc,Ti, V,Mn, Cu,Rh

On the RbNiCrF₆ Type. III. New Fluorides of the Type CsZnMF₆ (M = Al, Ga, In, Tl, Sc, Ti, V, Mn, Cu, Rh) Cubic compounds are CsZnGaF₆ [3] (colourless, a = 10.29 Å); CsZnInF₆ (colourless, a = 10.58 Å); CsZnTlF₆ (colourless, a = 10.62 Å); CsZnScF₆ (colourless, a = 10.58 Å); CsZnTiF₆ (lightblue, a = 10.50 Å); CsZnVF₆ (lightgreen, a = 10.43 Å); CsZnMnF₆ (redbrown, a = 10.40 Å); CsZnCuF₆ (light brown, a = 10.24 Å); CsZnRhF₆ (redbrown, a = 10.41 Å), all RbNiCrF₆ type of structure, in addition non cubic: CsZnAlF₆ (colourless). The Madelung part of lattice energy, MAPLE, is calculated and discussed.     

Direct Observation of the Binding Mode of the Phosphonate Anchor to Nanosized Polyoxotitanate Clusters

The structures of three newly synthesized phosphonate‐substituted polyoxotitanates are reported. The Ti/O core of [Ti₄O(OEt)₁₂(PhenylPO₃)] ( 1 ) is the building block for two larger phosphonate‐substituted nanoclusters, [Ti₂₅O₂₆(OEt)₃₆(PhenylPO₃)₆] ( 2 ) and [Ti₂₆O₂₆(OEt)₃₉(PhenylPO₃)₆]Br ( 3 ). All compounds exhibit a not previously recognized triply bridging binding mode of the phosphonate anchor with short connecting Ti? O bonds, the average of which is 2.010(7) Å. Comparison with previously reported work suggests that the binding mode of the phosphonate anchor is strongly dependent on the structure of the underlying substrate.     

On‐Surface Synthesis and Characterization of Triply Fused Porphyrin–Graphene Nanoribbon Hybrids

On‐surface synthesis offers a versatile approach to prepare novel carbon‐based nanostructures that cannot be obtained by conventional solution chemistry. Graphene nanoribbons (GNRs) have potential for a variety of applications. A key issue for their application in molecular electronics is in the fine‐tuning of their electronic properties through structural modifications, such as heteroatom doping or the incorporation of non‐benzenoid rings. In this context, the covalent fusion of GNRs and porphyrins (Pors) is a highly appealing strategy. Herein we present the selective on‐surface synthesis of a Por–GNR hybrid, which consists of two Pors connected by a short GNR segment. The atomically precise structure of the Por–GNR hybrid has been characterized by bond‐resolved scanning tunneling microscopy (STM) and noncontact atomic force microscopy (nc‐AFM). The electronic properties have been investigated by scanning tunneling spectroscopy (STS), in combination with DFT calculations, which reveals a low electronic gap of 0.4 eV.     

Host–Guest Complexation of Amphiphilic Molecules at the Air–Water Interface Prevents Oxidation by Hydroxyl Radicals and Singlet Oxygen

The oxidation of antioxidants by oxidizers imposes great challenges to both living organisms and the food industry. Here we show that the host–guest complexation of the carefully designed, positively charged, amphiphilic guanidinocalix[5]arene pentadodecyl ether (GC5A‐12C) and negatively charged oleic acid (OA), a well‐known cell membrane antioxidant, prevents the oxidation of the complex monolayers at the air–water interface from two potent oxidizers hydroxyl radicals (OH) and singlet delta oxygen (SDO). OH is generated from the gas phase and attacks from the top of the monolayer, while SDO is generated inside the monolayer and attacks amphiphiles from a lateral direction. Field‐induced droplet ionization mass spectrometry results have demonstrated that the host–guest complexation achieves steric shielding and prevents both types of oxidation as a result of the tight and “sleeved in” physical arrangement, rather than the chemical reactivity, of the complexes.     

The Elusive Ketene (H2CCO) Channel in the Infrared Multiphoton Dissociation of Solid 1,3,5-Trinitro-1,3,5-Triazinane (RDX)

Understanding of the fundamental mechanisms involved in the decomposition of 1,3,5-trinitro-1,3,5-triazinane (RDX) still represents a major challenge for the energetic materials and physical (organic) chemistry communities mainly because multiple competing dissociation channels are likely involved and previous detection methods of the products are not isomer selective. In this study we exploited a microsecond pulsed infrared laser to decompose thin RDX films at 5 K under mild conditions to limit the fragmentation channels. The subliming decomposition products during the temperature programed desorption phase are detected using isomer selective single photoionization time-of-flight mass spectrometry (PI-ReTOF-MS). This technique enables us to assign a product signal at m/z=42 to ketene (H₂CCO), but not to diazomethane (H₂CNN; 42 amu) as speculated previously. Electronic structure calculations support our experimental observations and unravel the decomposition mechanisms of RDX leading eventually to the elusive ketene (H₂CCO) via an exotic, four-membered ring intermediate. This study highlights the necessity to exploit isomer-selective detection schemes to probe the true decomposition products of nitramine-based energetic materials.     

Effects of internals and distributors on the distribution and growth of bubbles in the conventional gas-solid fluidized bed

The effects of internals and gas distributors on the local dynamics of the bubbles in the conventional gas-solid fluidized bed were studied.Mesh-type internals with different opening areas(50%,70%and 90%)and different arrangements(two-layer and four-layer);and a sintered plate with a smaller pore size(1μm)and a perforated plate with a larger pore size as distributors were investigated.Differential pressure drops and local solids holdups were measured under various superficial gas velocities to compare the performances of the different types of internals and distributors.The instantaneous solids holdup signals from the optical fibre probe were used to further examine the local bubble dynamics in detail.Smaller bubbles were found,with the installation of internals or using the sintered plate,resulting in lower pressure drops and a higher bed expansion.Internals with reduced opening area or distributor with smaller pore size further leads to a higher changeover rate between the bubbles and dense phase,both axially and radially,and hence a better gas-solid contacting and an earlier transition to the turbulent flow regime of the bed.     

Mechanism of Pterostilbene-Induced Cell Death in HT-29 Colon Cancer Cells

Pterostilbene is a dietary phytochemical that has been found to possess several biological activities, such as antioxidant and anti-inflammatory. Recent studies have shown that it exhibits the hallmark characteristics of an anticancer agent. The aim of the study was to investigate the anticancer activity of pterostilbene against HT-29 human colon cancer cells, focusing on its influence on cell growth, differentiation, and the ability of this stilbene to induce cell death. To clarify the mechanism of pterostilbene activity against colon cancer cells, changes in the expression of several genes and proteins that are directly related to cell proliferation, signal transduction pathways, apoptosis, and autophagy were also evaluated. Cell growth and proliferation of cells exposed to pterostilbene (5–100 µM) were determined by SRB and BRDU assays. Flow cytometric analyses were used for cell cycle progression. Further molecular investigations were performed using quantitative real-time RT-PCR. The expression of the signaling proteins studied was determined by the ELISA method. The results revealed that pterostilbene inhibited proliferation and induced the death of HT-29 colon cancer cells. Pterostilbene, depending on concentration, caused inhibition of proliferation, G1 cell arrest, and/or triggered apoptosis in HT-29 cells. These effects were mediated by the down-regulation of the STAT3 and AKT kinase pathways. It may be concluded that pterostilbene could be considered as a potential therapeutic option in the treatment of colon cancer in the future.     

Colonization of cashew plants by Lasiodiplodia theobromae: microscopical features

Lasiodiplodia theobromae is a phytopathogenic fungus causing gummosis, a threatening disease for cashew plants in Brazil. In an attempt to investigate the ultrastructural features of the pathogen colonization and its response to immunofluorescence labeling, light, confocal and electron microscope studies were conducted on different severity scale patterns of diseased plants. Lasiodiplodia-antisera was checked for cross reactivity against common cashew plants fungi. Optical microscopy analysis revealed a longitudinally sectioned hyphae located within the xylem vessels, showing an extensive hyphal development in the secondary xylem tissue. SEM images demonstrated that the fungus was found in some asymptomatic samples, particularly within the xylem vessels as confirmed by the optical images. Symptomatic sample images showed an extensive distribution of the fungus along the secondary xylem, within the vessels, infecting xylem parenchyma. A closer look in the secondary xylem parenchyma reveals a heavy and profuse invasion of the cells with a distinguishable cell wall disintegration and fully hyphae dispersal. There was no reactivity of Lasiodiplodia-antisera against mycelial extracts of Colletotrichum gloeosporioides, Phomopsis anardii and Pestalotiopsis guepinii. Following incubation of sections with the polyclonal antisera, the hyphae were intensely and regularly labeled. Rays, vessels and parenchyma cells were the preferred pathway for L. theobromae colonization. Artificial infection provides the information that the vascular cylinder is undoubtedly employed and used by the fungus for hyphae distribution. Immunofluorescence assay employed in situ was applied and the polyclonal antisera produced was able to recognize the fungus and proved to be a sensitive technique to detect it.