Effect of surface treatment methods on the shear bond strength between resin cement and all-ceramic core materials

This study compared the influence of various surface treatments on the shear bond strength between resin cement and lithium disilicate glass-ceramics. A series of 120 lithium disilicate ceramic samples were prepared to compare the effect of different surface treatments on the shear strength of a luting cement bonded to two all-ceramic systems. IPS Empress 2 and IPS e.max Press ceramic samples were fabricated according to the manufacturer's instructions. The ceramic samples were divided into the following 6 surface treatment groups for each ceramic system: 1—no treatment (C), 2—airborne-particle abrasion (A), 3—acid etching (E), 4—airborne-particle abrasion + acid etching (AE), 5—Nd:YAG laser (L), 6—Nd:YAG laser + acid etching (LE). Resin cement was then bonded to the treated ceramic surfaces and light polymerized. The shear bond strengths of the specimens were measured using a universal testing machine. Two-way ANOVA and Tukey HSD (α = 0.05) test were used to determine differences in shear bond strength between the groups. The ANOVA revealed significant differences between the treatment groups and ceramic types (p < 0.05). The shear bond strengths of IPS Empress 2 were significantly higher than those of IPS e.max Press.     

Controlled Assembly of Cu/Co-Oxide Beaded Nanoclusters on Thiolated Graphene Oxide Nanosheets for High-Performance Oxygen Evolution Catalysts

The use of water splitting modules is highly desired for the sustainable production of H₂ as a future energy carrier. However, the sluggish kinetics and demand of high anodic potential are the bottlenecks for half-the cell oxygen evolution reaction (OER), which severely hamper the overall conversion efficiency. Although transition metal oxides based electrocatalysts have been envisioned as cost-effective and potential contenders for this quest, nevertheless, their low conductivity, instability, and limited number of active sites are among the common impediments that need to be addressed to eventually enhance their inherent catalytic potential for enhanced OER activity. Herein, the controlled assembly of transition metal oxides, that is, Cu@CuO_x nanoclusters (NCs, ≈2 nm) and Co@CoO_x beaded nanoclusters (BNCs, ≈2 nm), on thiol-functionalized graphene oxide (G-SH) nanosheets is reported to form novel and highly efficient electrocatalysts for OER. The thiol (-SH) functionality was incorporated by selective epoxidation on the surface of graphene oxide (GO) to achieve chemically exfoliated nanosheets to enhance its conductivity and trapping ability for metal oxides in nanoscale dimensions (≈2 nm). During the electrocatalytic reaction, overpotentials of 290 mV and 310 mV are required to achieve a current density of 10 mA cm⁻² for BNCs and NCs, respectively, and the catalysts exhibit tremendous long-term stability (≈50 h) in purified alkaline medium (1 m KOH) with no dissolution in the electrolyte. Moreover, the smaller Tafel slopes (54 mV/dec for BNCs and 66 mV/dec for NCs), and a Faradic efficiency of approximately 96 % indicate not only the selectivity but also the tailored heterogeneous electrons transfer (HET) rate, which is required for fast electrode kinetics. It is anticipated that such ultrasmall metal oxide nanoclusters and their controlled assembly on a conducting surface (G-SH) may offer high electrochemical accessibility and a plethora of active sites owing to the drastic decrease in dimensions and thus can synergistically ameliorate the challenging OER process.     

Continuous Flow Synthesis of a Zr Magnetic Framework Composite for Post-Combustion CO2 Capture

Metal-organic frameworks (MOFs) have an unprecedented ability to store gas molecules, however energy efficient regeneration remains challenging. Use of magnetic induction to aid this shows promise, but economical synthesis of the requisite composites is unresolved. Continuous flow chemistry has been reported as a rapid and reliable method of MOF synthesis, delivering step-change improvements in space time yields (STY). Here the scalable production of nanomaterials suitable for regeneration by magnetic induction is demonstrated. The zirconium MOF composite, MgFe₂O₄@UiO-66-NH₂ is prepared using continuous flow chemistry resulting in a material of comparable performance to its batch counterpart. Upscaling using flow chemistry gave STY >25 times that of batch synthesis. Magnetic induced regeneration using this mass produced MFC for carbon capture is then demonstrated.     

Hollow BiOBr/reduced graphene oxide hybrids encapsulating hemoglobin for a mediator-free biosensor

Journal of Solid State Electrochemistry - For the construction of a mediator-free biosensor, hollow BiOBr microspheres (H-BiOBr MS) were hydrothermally synthesized and combined with reduced...     

Calcium Phosphate-Based Composite Coating by Micro-Arc Oxidation (MAO) for Biomedical Application: A Review

Calcium phosphate (Ca-P) based composites have attracted great attention in the scientific community over the last decade for the development of biomedical applications. Among such Ca-P-based structures, carbonate apatite (CA) and hydroxyapatite (HA) materials have received much attention in the clinical and biomedical fields, mainly because of their unique biological characteristics. These characteristics can promote the biocompatibility of implant materials and osseointegration between the implant and host bone. Various studies have been carried out on the fabrication of Ca-P coatings on orthopedic and dental implants using the micro-arc oxidation (MAO) process; however, there has not been a comprehensive review of the control of MAO parameters to achieve an optimal coating structure. This article presents a critical analysis of the synthesis techniques that have been adopted for the fabrication of Ca-P-based coatings on both commercially pure titanium (CP-Ti) and biomedical grade Ti alloys. Moreover, this work elucidates the influence of MAO processing parameters such as electrolyte concentration, pH value, voltage, and time on the crystal structure and surface morphology of Ca-P coatings. It is shown that the surface thickness, crystal structure, and surface morphology of Ca-P coatings directly influence their biocompatibility.     

Synthesis of Novel N-Acylhydrazones and Their C-N/N-N Bond Conformational Characterization by NMR Spectroscopy

In this article, a synthesis of N’-(benzylidene)-2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetohydrazides and their structural interpretation by NMR experiments is described in an attempt to explain the duplication of some peaks in their ¹H- and ¹³C-NMR spectra. Twenty new 6-methyl-1H-pyrazolo[3,4-b]quinoline substituted N-acylhydrazones 6(a–t) were synthesized from 2-chloro-6-methylquinoline-3-carbaldehyde (1) in four steps. 2-Chloro-6-methylquinoline-3-carbaldehyde (1) afforded 6-methyl-1H-pyrazolo[3,4-b]quinoline (2), which upon N-alkylation yielded 2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetate (3). The hydrazinolysis of 3 followed by the condensation of resulting 2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetohydrazide (4) with aromatic aldehydes gave N-acylhydrazones 6(a–t). Structures of the synthesized compounds were established by readily available techniques such as FT-IR, NMR and mass spectral studies. The stereochemical behavior of 6(a–t) was studied in dimethyl sulfoxide-d₆ solvent by means of ¹H NMR and ¹³C NMR techniques at room temperature. NMR spectra revealed the presence of N’-(benzylidene)-2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetohydrazides as a mixture of two conformers, i.e., E_(C=N)(N-N) synperiplanar and E_(C=N)(N-N) antiperiplanar at room temperature in DMSO-d₆. The ratio of both conformers was also calculated and E_{(C=N) (N-N)} syn-periplanar conformer was established to be in higher percentage in equilibrium with the E_{(C=N) (N-N)} anti-periplanar form.     

Effect of benzyladenine on recovery of cryopreserved shoot tips of grapevine and citrus cultured in vitro

The effect of N6-benzyladenine (BA) on the recovery of cryopreserved shoot tips of the LN33 hybrid (Vitis L.) and Troyer citrange [Poncirus trifoliata (L.) Raf. x Citrus sinensis [L.] Osbeck.] cultured in vitro was examined. For the LN33 hybrid, the presence of BA in the recovery medium was essential for survival of control and cryopreserved shoot tips, although the BA concentration did not influence the survival percentage. BA at 5, 2, and 5 microM or higher induced callus formation in control, and shoot tips cryopreserved by vitrification, and by encapsulation-dehydration, respectively. While a BA concentration of 4 microM was found optimal for recovery of control shoot tips, 1 and 2-4 microM produced the best recovery of shoot tips cryopreserved by vitrification and encapsulation-dehydration, respectively. A similar pattern of effect of BA on recovery was found for 'Troyer' citrange. Low survival of control and cryopreserved shoot tips was observed with a BA-free recovery medium. The addition of BA to the recovery medium significantly increased survival. The BA concentration that induced callus formation in shoot tips cryopreserved by encapsulation-vitrification was higher than that which induced it in those cryopreserved by encapsulation-dehydration. Recovery of control shoot tips was best with an addition of 6-10 microM BA to the medium. Optimal recovery of shoot tips cryopreserved by encapsulation-vitrification and encapsulation-dehydration was achieved with 3-4 and 2 microM BA, respectively. Results from the present study suggest that an optimal BA concentration for recovery of control shoot tips may be different from that for cryopreserved shoot tips; furthermore, the optimal BA concentration for recovery of cryopreserved shoot tips may also differ among different cryogenic procedures.     

The development of a cholesterol biosensor using a liquid crystal/aqueous interface in a SDS-included β-cyclodextrin aqueous solution

Sodium dodecyl sulphate (SDS) including β-cyclodextrin (β-CD) (β-CD_SDS) was used to detect cholesterol at the 4-cyano-4′-pentylbiphenyl (5CB)/aqueous interface in transmission electron microscopy (TEM) grid cells. The β-CD acts as a host for SDS (guest). The guest SDS enclosed within the β-CD cavity was replaced with cholesterol by injecting cholesterol solution into the TEM cell at concentrations greater than 3 μM. The replacement of SDS with cholesterol was confirmed by pH measurement and high performance liquid chromatography (HPLC). The SDS excluded from the β-CD altered the planar orientation of the 5CB confined within the TEM grid cell to a homeotropic orientation. This planar-to-homeotropic transition was observed using a polarized optical microscope under crossed polarizers. This convenient TEM grid cell provides a new method for the selective detection of cholesterol without immobilization of the detecting receptors (enzyme, antibody, or aptamer) or the use of sophisticated instruments.     

An Encryption Scheme Based on Discrete Quantum Map and Continuous Chaotic System

International Journal of Theoretical Physics - Chaotic encryption is a growing field for competently shielding visual data. As well as quantum encryption and substitution also play a significant...