Biopolymer electrolytes based on carboxymethyl ҡ-carrageenan and imidazolium ionic liquid

Novel biopolymer electrolytes based on carboxymethyl kappa-carrageenan (CM?-carrageenan) and ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) have been successfully developed. Strong coordination and hydrogen bonding interaction of [Bmim]Cl with the biopolymer were detected by Fourier transform infrared (FTIR) spectroscopy. The efficient function of [Bmim]Cl as the charge carrier in the system was reflected by electrochemical impedance spectroscopy (EIS) where the highest ionic conductivity (σ) of (5.76 ± 0.20) × 10^?3 S cm^?1 was achieved at ambient temperature (298 K) upon 30 wt.% of [Bmim]Cl inclusion. X-ray diffraction (XRD) analysis confirmed that the addition of ionic liquid did not alter the prominent amorphous phase of CM?-carrageenan. Analysis of scanning electron microscopy (SEM) proved the strong interaction of [Bmim]Cl with the biopolymer matrix. The highest conducting biopolymer electrolyte showed an electrochemical stability up to 3.0 V, whereas the transference number measurement revealed that ions are the major elements that contribute to the conductivity with 0.970 ion transference number.     

Image sharing scheme based on combination theory

We present a simple algorithm for sharing and hiding secret image based on combination theory. The secret image is firstly encrypted by matrix multiplications and then shared into many shadow images by multiplying binary random sampling matrices. The sampling matrices randomly assign the pixel values to the shadow images which satisfy a specific combination rule as a constrain, so that the (t, n) threshold secret sharing scheme can be implemented. Numerical experiments have demonstrated the effectiveness of this image sharing algorithm.     

Synthesis, structural and magnetic properties of the nanocomposite Fe63B23Nd7Y3Nb3Cr1 magnets

The Fe₆₃B₂₃Nd₇Y₃Nb₃Cr₁ nanocomposite magnets in the form of sheets have been prepared by copper mold casting technique. The phase evolution, crystal structure, microstructural and magnetic properties have been investigated in the as-cast and annealed states. The as-cast sheets show magnetically soft behaviors which become magnetically hard by thermal annealing. The optimal annealed microstructure was composed of nanosize soft magnetic α-Fe (19-29 nm) and hard magnetic Nd₂Fe₁₄B (45-55 nm) grains. The best hard magnetic properties such as intrinsic coercivity, _jH_c of 1119 kA/m, remanence, B_r of 0.44 T, magnetic induction to saturation magnetization ratio, M_r/M_s=0.61 and maximum energy product, (BH)_max of 55 kJ/m³ was obtained after annealing at 680 °C for 15 min. The annealing treatment above 680 °C results in non-ideal phase grains growth, which degrade the magnetic properties.     

Real-time quantification of viable bacteria in liquid medium using infrared thermography

Quantifying viable bacteria in liquids is important in environmental, food processing, manufacturing, and medical applications. Since vegetative bacteria generate heat as a result of biochemical reactions associated with cellular functions, thermal sensing techniques, including infrared thermography (IRT), have been used to detect viable cells in biologic samples. We developed a novel method that extends the dynamic range and improves the sensitivity of bacterial quantification by IRT. The approach uses IRT video, thermodynamics laws, and heat transfer mechanisms to directly measure, in real-time, the amount of energy lost as heat from the surface of a liquid sample containing bacteria when the specimen cools to a lower temperature over 2 min. We show that the Energy Content (EC) of liquid media containing as few as 120 colony-forming units (CFU) of Escherichia coli per ml was significantly higher than that of sterile media (P < 0.0001), and that EC and viable counts were strongly positively correlated (r = 0.986) over a range of 120 to approximately 5 × 10⁸ CFU/ml. Our IRT approach is a unique non-contact method that provides real-time bacterial enumeration over a wide dynamic range without the need for sample concentration, modification, or destruction. The approach could be adapted to quantify other living cells in a liquid milieu and has the potential for automation and high throughput.     

On the accuracy of bore reconstruction from input impedance measurements: application to bassoon crook measurements

The determination of a pipe bore from the measured reflection function is a technique that has reached a certain maturity. However, the measurement of the reflection function in the time domain (pulse reflectometry) requires equipment that is rather difficult to operate. On the other hand, the techniques for measuring the input impedance have reached an unquestionable maturity with respect to measurement setup and to calibration. It is thus likely that impedance measurements might be able to give the same information. By doing simulations, it is first shown that the reflection function deduced from the input impedance gives access to the bore with a precision comparable with that obtained with pulse reflectometry. It is then shown that the accuracy obtained with measurements is of the same order as that obtained from simulations. The technique is then used for the dimensional inspection of bassoon crooks.     

Preparation and properties of semiconductor CuO nanoparticles via a simple precipitation method at different reaction temperatures

Preparation and properties of CuO nanoparticles as an important p-type semiconductor via a simple precipitation method at different reaction temperatures varying from 10 to 115°C using copper acetate as a starting material have been reported. In addition, we investigated the influence of the ultrasonic irradiation through synthesizing the nanosized CuO at 60°C. Samples were characterized by XRD, FT-IR, SEM, TEM and UV-Vis techniques. XRD patterns of samples were identical to the single-phase pure CuO with a monoclinic structure. FT-IR spectra exhibited sharp peaks at around 519 and 598?cm^?1 which can be assigned to vibrations of the Cu-O bond. Results indicated that properties of samples had great dependence on the temperature and ultrasonic irradiation. The crystallite size and crystallization increased with increasing the temperature from 10 to 115°C. The band gap of samples was estimated to be in the range of 1.9–2.9?eV that is larger than the reported value for the bulk CuO (1.85?eV). This study provides a simple method for the preparation of nanosized CuO with a better surface uniformity and a narrow size distribution. Synthesized CuO samples with adjustable and controllable optical properties make the applicability of copper oxide even more versatile.     

Effect of substitution of K ions on the structural and electrical properties of nanocrystalline MgAl2O4 spinel oxide

Potassium substituted nanosized magnesium aluminates having a nominal composition Mg_1−xK_xAl₂O₄ where x=0.0, 0.25, 0.5, 0.75, 1.0 have been synthesized by the chemical co-precipitation method. The samples have been characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), and dc electrical resistivity measurements. The XRD results reveal that the samples are spinel single phase cubic close packed crystalline materials. The calculated crystallite size ranges between 6 and 8 nm. The behaviour of the lattice constant seems to deviate from the Vegard's law. While X-ray density clearly increases, the bulk density and consequently, the percentage porosity do not exhibit a significant change on increasing the K⁺ content. The SEM micrographs suggest homogeneous distribution of the nanocrystallites in the samples. The dc electrical resistivity exhibits a typical semiconducting behaviour. Substitution of a Mg²⁺ ion by a K⁺ ion provides an extra hole to the system, which forms small polaron. Thermally activated hopping of these small polarons is believed to be the conduction mechanism in the Mg_1−xK_xAl₂O₄. The activation energy of hopping of small polarons has been calculated and found K⁺ ions content dependent.     

Relativistic J-dependence of the isotope shift in the 6s-6p doublet of Ba II

The collinear laser-ion beam technique has been used to measure the isotope shift and hyperfine structure in the 6s-6p doublet (4,934Å, 4,554Å) of Ba II for all seven stable isotopes. The influence of the excited² P _1/2 and² P _3/2 states on the field shift leads to a difference of 2.5(3)% in the electronicF factors. The specific mass shifts differ by {A′-A} 2.2(3) MHz which corresponds to about 12% of the normal mass shift.