Electrical Conductivity in a Laser Beam Channel

Russian Physics Journal - Electrical conductivity in a laser beam channel has been investigated. Oscillations of the conductivity caused by the oscillation motion of electrons in laser-induced...     

Blue organic light-emitting diodes with low driving voltage and maximum enhanced power efficiency based on buffer layer MoO3

Blue organic light-emitting devices based on wide bandgap host material, 2-(t-butyl)-9, 10-di-(2-naphthyl) anthracene (TBADN), blue fluorescent styrylamine dopant, p-bis(p-N,N-diphenyl-amino-styryl)benzene (DSA-Ph) have been realized by using molybdenum oxide (MoO₃) as a buffer layer and 4,7-diphenyl-1,10-phenanthroline (BPhen) as the ETL. The typical device structure used was glass substrate/ITO/MoO₃ (5 nm)/NPB (30 nm)/[TBADN: DSA-Ph (3 wt%)](35 nm)/BPhen (12 nm)/LiF (0.8 nm)/Al (100 nm). It was found that the MoO₃∥BPhen-based device shows the lowest driving voltage and highest power efficiency among the referenced devices. At the current density of 20 mA/cm², its driving voltage and power efficiency are 5.4 V and 4.7 Lm/W, respectively, which is independently reduced 46%, and improved 74% compared with those the m-MTDATA∥Alq₃ is based on, respectively. The J-V curves of ‘hole-only’ devices reveal that a small hole injection barrier between MoO₃∥NPB leads to a strong hole injection, resulting low driving voltage and high power efficiency. The results strongly indicate that carrier injection ability and balance shows a key significance in OLED performance.     

An optimal repeat inspection plan with several classifications

Multicharacteristic critical components exist in many systems. Such components could be a part of an aircraft, space shuttle or a gas ignition system. A component is critical if it causes disaster or a very high cost upon failure. In this paper, a new inspection plan for critical multicharacteristic components is presented. A mathematical model that depicts the plan is developed. An algorithm is proposed for finding the optimal number of repeat inspections and the sequence of characteristics for inspection that minimizes expected total cost per accepted component. The expected cost consists of the cost of inspection and the cost of misclassifications. The inspection plan and the model developed generalize existing models in the literature and provide a more realistic formulation. An example is given to demonstrate the plan and the model.     

The finite torsion subgroup of an LCA group need not split

A locally compact abelian topological groupG is constructed whose maximal torsion subgroup is finite but not a topological direct summand ofG.     

A Characterisation of a Class of Semigroups with Locally Commuting Idempotents

McAlister proved that a necessary and sufficient condition for a regular semigroup S to be locally inverse is that it can be embedded as a quasi-ideal in a semigroup T which satisfies the following two conditions: (1) T = TeT, for some idempotent e; and (2) eTe is inverse. We generalise this result to the class of semigroups with local units in which all local submonoids have commuting idempotents.     

Nonclassicality of two-mode nonorthogonal states

Nonclassical features of Schrödinger cat state with two-mode superposition state based on two coherent states π out of phase by fixing the relative phase equal to average photon number are discussed. Study of two-mode quadrature squeezing, oscillatory and sub-Poissonian photon statistics show that nonclassicality exists for these states. However, it is observed that the considered states do not violates the Cauchy–Schwarz inequality. Furthermore, simultaneously existence of quadrature squeezing and sub-Poissonian photon statistics shows that these states have more nonclassical features than that of famous even and odd coherent states.     

Influences of Co doping on the structural and optical properties of ZnO nanostructured

Pure and Co-doped ZnO nanostructured samples have been synthesized by a chemical route. We have studied the structural and optical properties of the samples by using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), field-emission transmission electron microscope (FETEM), energy-dispersive X-ray (EDX) analysis and UV–VIS spectroscopy. The XRD patterns show that all the samples are hexagonal wurtzite structures. Changes in crystallite size due to mechanical activation were also determined from X-ray measurements. These results were correlated with changes in particle size followed by SEM and TEM. The average crystallite sizes obtained from XRD were between 20 to 25 nm. The TEM images showed the average particle size of undoped ZnO nanostructure was about 20 nm whereas the smallest average grain size at 3% Co was about 15 nm. Optical parameters such as absorption coefficient (α), energy band gap (E _g ), the refractive index (n), and dielectric constants (σ) have been determined using different methods.     

Facile synthesis of silver doped-copper oxide nano materials utilizing areca catechu (AC) leaf extract and their antidiabetic and anticancer studies

The present research highlights physical significance of green combination of metal oxide nanomaterials utilizing medicinal plant which has widely analyzed in different medical applications i.e., medicinal science, therapeutics. In this paper, we discussed environmentally benign approach for synthesizing silver doped copper oxide nanoparticles (Ag–CuO NPs) utilizing (ACLE). Scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) were utilized to confirm the size, crystalline structure and surface morphology of the obtained nanomaterials. The monoclinic crystalline structure of the Ag–CuO NPs as produced was revealed by XRD patterns. Morphological analysis disclosed the nano-based spherical configuration of Ag–CuO NPs, as well as their morphology and elemental composition. The anti-diabetic effect of Ag–CuO NPs was further investigated utilizing a yeast cell model and amylase inhibition. Here, a decrease in intracellular glucose and a delay in carbohydrate digestion indicate promising antidiabetic action. Furthermore, the prepared nanomaterial showed anticancer potential against the MCF-7 cancer cell line, with an IC ₅₀ value of 11.21 g/ml.     

Structure elucidation of three isomeric metabolites of SYN-2836, a novel antifungal agent, in dogs via liquid chromatography/mass spectrometry and liquid chromatography/tandem mass spectrometry methodologies.

This paper presents liquid chromatography/mass spectrometry (LC/MS) and liquid chromatography/tandem mass spectrometry (LC/MS/MS) approaches for the rapid characterization of three urinary isomeric metabolites and their two precursor metabolites of SYN-2836, a novel antifungal agent, in dogs administered multiple oral doses of the agent (30 mg kg(-1) day(-1)). A collection of correlative data regarding the SYN-2836 metabolites was obtained by LC/MS and LC/MS/MS performed under complementary conditions such as the columns (C(18) vs cyano type), the mobile phase systems (acetonitrile-water-formic acid vs acetonitrile-water-ammonium acetate) and the electrospray ionization modes (positive vs negative). Metabolite identification was accomplished based on not only the LC/MS/MS data (product ion spectra) but also the LC/MS data indicating chromatographic behaviors of the metabolites. SYN-2836 and SYN-2869, an analog of the former, showed almost the same metabolic pathways following the same multiple-dose administration of the individual agents to the dogs. Therefore, correlation analysis in product ion spectra between corresponding metabolites of SYN-2836 and SYN-2869, and also in metabolic pathways between the two agents, was strategically used to facilitate the identification of the SYN-2836 (and SYN-2869 if necessary) metabolites. For the reason that various elucidation strategies were used complementarily, the chemical structures of the metabolites were unambiguously attained and the isomeric metabolites were explicitly differentiated without the use of other analytical methods. The methodologies used in this study may be applicable to metabolite screening of several structurally related agents simultaneously, promoting lead finding and optimization of drug candidates using a metabolism-based approach.