Some aspects of the polymerization of N-vinylcarbazole by grignard reagents

The polymerization of N-vinylcarbazole (NVC) initiated by PhMgBr in benzene was studied at 32°C. R_p is second order with respect to PhMgBr concentration but increases with NVC concentration (up to 0.06 M) and falls thereafter. R_p and P _n are depressed by the addition of thiophene and water. Modifiers such as benzaldehyde, butanone, and ethylene glycol practically inhibit the polymerization. Carbon tetrachloride and carbon dioxide, when passed through the NVC solution first, enhance the R_p and P _n increases with increasing PhMgBr and NVC concentrations, respectively. R_p increases with temperature, but P _n shows a maxium at a certain temperature. A cationic mechanism has been proposed where the polymerization is initiated by RMg⁺ cations produced from the ionization of PhMgBr by the Ashby and Smith mechanism.     

Spectrophotometric determination of ascorbic acid in pharmaceuticals by background correction and flow injection

Background correction has been shown to be an effective and indispensable modification in the spectrophotometric determination of ascorbic acid. The decomposition of ascorbic acid in pharmaceutical samples was carried out by incubation with sodium hydroxide to give products that were insensitive to ultraviolet light. The rapid oxidation in air of ascorbic acid, especially in dilute solutions, was avoided by the use of the flow injection principle for spectrophotometric determination and by employing a carrier stream of an anti-oxidizing nature consisting of 6 micrograms ml(-1) of 2-mercaptoethanol in 0.25% sulphuric acid. The optimized method with a single channel manifold made use of a carrier stream flow rate of 1.1 ml min(-1), an injection volume of 50 microl, a delay coil of 50 cm (0.5 mm i.d.) and detection at 245 nm. The throughput was at least 180 injections h(-1). The proposed flow injection method yielded results for the analysis of 0-20 micrograms ml(-1) of ascorbic acid that were 99-102% (relative standard deviation 0.6% or better) in agreement with those produced by comparable methods involving titration with iodine, chloranil or 2,6-dichlorophenolindophenol [4-(2,6-dichloro-4-hydroxyphenylimino)cyclohexa-2,5-dieno ne], and high-performance liquid chromatography. When the agreement was not good (as low as 14% with respect to the method being compared), this was traced to the presence of substances which are known to interfere in one or other of the methods of comparison.     

Chloride estimation by a solid membrane electrode

Summary A solid membrane electrode based on Cr-Zr mixed hydrous oxide gel doped with Sn(II) ion has been proposed for the estimation of chloride ions. The electrode can be used in the concentration range 0.1 to 5×10^–5 M. The selectivity of the electrode system is much better as compared to other electrodes reported for the same ion.

---

Chloridbestimmung mit Hilfe einer festen Membran-Elektrode

Zusammenfassung Eine feste Membran-Elektrode auf der Basis einer mit Sn(II)-Ionen gedopten Mischung aus Chrom- und Zirkon-Oxidhydratgel wurde für die Bestimmung von Chloridionen vorgeschlagen. Diese Elektrode läßt sich im Konzentrationsgebiet 0,1 bis 5×10^–5 M verwenden. Die Selektivität ist erheblich besser als diejenige anderer Elektroden.

     

Polarographie von Indium(III) in Alkali-und Erdalkalinitratlösungen

Zusammenfassung Es wurde das polarographische Verhalten von Indium(III) in verschiedenen Nitraten in Abhängigkeit von der Konzentration untersucht. Die Ergebnisse wurden unter besonderer Beachtung der Faktoren Viskosität, Diffusionskoeffizienten und Ionensolvatation interpretiert. Die scheinbaren Geschwindigkeitskonstanten wurden nach dem Verfahren vonDelahay bestimmt und ein quasireversibles Verhalten festgestellt.

---

Polarography of indium(III) in alkali and alkaline earth nitrates

Polarographic behavior of Indium(III) in several nitrates of varying concentrations has been studied and resuts interpreted in the light of factors viscosity, diffusion coefficients and ion solvation. The apparent rate constants were determined byDelahay's treatment which revealed its quasireversible behavior.

---

---

An den allfällige Korrespondenz zu richten ist.     

Synthesis of carpachromene and related isopentenylated derivatives of apigenin

Acacetin (4) on reaction with prenyl bromide in the presence of methanolic sodium methoxide yielded 6,8-di-C-prenyl-(5) and 6-C-prenyl-(10) derivatives. The former (5) formed the corresponding bisdihydropyrano derivative (8). Monomethyl derivative of 10 (12) gave monodihydropyrano derivative (13). DDQ reaction of 10 followed by methylation afforded di-O-methyl carpachromene (2); whereas that of 5 gave a mixture of 21 and 22.

Nuclear prenylation of apigenin (3) in a similar way gave 6,8-di-C-C-prenyl-(16), its 7-0-prenyl-(15) and 6-C-prenyl-(18) derivatives. DDQ reaction of 18 provided natural carpachromene.¹ The structure of the isopentylated apigenin isolated by Dreyer et al.² needs further consideration.     

Pseudo-Binary Phase Diagram of LiNH2-MH (M = Na,K) Eutectic Mixture

The hunt for a cleaner energy carrier leads us to consider a source that produces no toxic byproducts. One of the targeted alternatives in this approach is hydrogen energy, which, unfortunately, suffers from a lack of efficient storage media. Solid-state hydrogen absorption systems, such as lithium amide (LiNH₂) systems, may store up to 6.5 weight percent hydrogen. However, the temperature of hydrogenation and dehydrogenation is too high for practical use. Various molar ratios of LiNH₂ with sodium hydride (NaH) and potassium hydride (KH) have been explored in this paper. The temperature of hydrogenation for LiNH₂ combined with KH and NaH was found to be substantially lower than the temperature of individual LiNH₂. This lower temperature operation of both LiNH₂-NaH and LiNH₂-KH systems was investigated in depth, and the eutectic melting phenomenon was observed. Systematic thermal studies of this amide-hydride system in different compositions were carried out, which enabled the plotting of a pseudo-binary phase diagram. The occurrence of eutectic interaction increased atomic mobility, which resulted in the kinetic modification followed by an increase in the reactivity of two materials. For these eutectic compositions, i.e., 0.15LiNH₂-0.85NaH and 0.25LiNH₂-0.75KH, the lowest melting temperature was found to be 307 °C and 235 °C, respectively. Morphological studies were used to investigate and present the detailed mechanism linked with this phenomenon.