Stereochemical,biochemical and ligation behaviour of divalent platinum complexes of sulfur and nitrogen donor agents

Divalent Pt complexes of o-FC₆ H₄ C(H)NNC(SH)SCH₂ Ph(L¹H) and o-FC₆ H₄ C(Me)NNC(SH)SCH₂ Ph(L ²H) have been synthesized and characterized thoroughly by analytical data, conductance measurements, molecular weight determinations, magnetic measurements, i.r., electronic, ¹H-n.m.r. and ¹⁹F-n.m.r. spectral studies. The spectral data are consistent with a square planar geometry around Pt^IIin which the ligand acts as a neutral bidentate and monobasic bidentate ligand coordinating through nitrogen and sulfur atoms. Ligands and their metal complexes were tested against certain microorganisms to assess their antimicrobial properties and the results are indeed positive.     

Efficient Recycling of Gold and Copper from Electronic Waste by Selective Precipitation

The recycling of metals from electronic waste (e-waste) using efficient, selective, and sustainable processes is integral to circular economy and net-zero aspirations. Herein, we report a new method for the selective precipitation of metals such as gold and copper that offsets the use of organic solvents that are traditionally employed in solvent extraction processes. We show that gold can be selectively precipitated from a mixture of metals in hydrochloric acid solution using triphenylphosphine oxide (TPPO), as the complex [(TPPO)₄(H₅O₂)][AuCl₄]. By tuning the acid concentration, controlled precipitation of gold, zinc and iron can be achieved. We also show that copper can be selectively precipitated using 2,3-pyrazinedicarboxylic acid (2,3-PDCA), as the complex [Cu(2,3-PDCA-H)₂]_n ⋅ 2n(H₂O). The combination of these two precipitation methods resulted in the recovery of 99.5 % of the Au and 98.5 % of the Cu present in the connector pins of an end-of-life computer processing unit. The selectivity of these precipitation processes, combined with their straightforward operation and the ability to recycle and reuse the precipitants, suggests potential industrial uses in the purification of gold and copper from e-waste.     

Immobilization of Xylanase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> Strain MK001 and its Application in Production of Xylo-oligosaccharides

Xylanase from Bacillus pumilus strain MK001 was immobilized on different matrices following varied immobilization methods. Entrapment using gelatin (GE) (40.0%), physical adsorption on chitin (CH) (35.0%), ionic binding with Q-sepharose (Q-S) (45.0%), and covalent binding with HP-20 beads (42.0%) showed the maximum xylanase immobilization efficiency. The optimum pH of immobilized xylanase shifted up to 1.0 unit (pH 7.0) as compared to free enzyme (pH 6.0). The immobilized xylanase exhibited higher pH stability (up to 28.0%) in the alkaline pH range (7.0–10.0) as compared to free enzyme. Optimum temperature of immobilized xylanase was observed to be 8 °C higher (68.0 °C) than free enzyme (60.0 °C). The free xylanase retained 50.0% activity, whereas xylanase immobilized on HP-20, Q-S, CH, and GE retained 68.0, 64.0, 58.0, and 57.0% residual activity, respectively, after 3 h of incubation at 80.0 °C. The immobilized xylanase registered marginal increase and decrease in K _m and V _max values, respectively, as compared to free enzyme. The immobilized xylanase retained up to 70.0% of its initial hydrolysis activity after seven enzyme reaction cycles. The immobilized xylanase was found to produce higher levels of high-quality xylo-oligosaccharides from birchwood xylan, indicating its potential in the nutraceutical industry.     

A new intramolecular charge transfer receptor as a selective ratiometric ‘off-on’ sensor for Zn

A new intramolecular charge transfer (ICT) probe 3 is found to display a highly selective photophysical response in the presence of Zn²⁺, among various biologically significant metal ions examined. The absorption band of 3 is red shifted by 84 nm and the fluorescence intensity increases 13-fold in the presence of Zn²⁺. The binding interaction follows the order Zn²⁺ > Cd²⁺ > Mg²⁺ > Ba²⁺ > Ca²⁺ > K⁺ ≅ Na⁺ ≅ Li⁺ and the stability constant for 3 + Zn²⁺ is over an order of magnitude higher compared to biologically competing Ca²⁺ and Mg²⁺.     

Biofouling and biodegradation of polyolefins in ocean waters

High density polyethylene (HDPE), low density polyethylene (LDPE) and polypropylene (PP) coupons were immersed for a period of 6 months in Bay of Bengal near Chennai Port (Port) and Fisheries Survey of India (FSI). Samples were retrieved every month and the extent of biofouling and biodegradation were monitored by measuring biological and physicochemical parameters. Dissolved oxygen and oxidation reduction potential were higher at Port than at FSI. Total suspended solids and organic matter were more on PP, followed by HDPE and LDPE indicating hydrophobic surfaces favour more biofouling. Pseudomonas sp., anaerobic, heterotrophic and iron-reducing bacteria were observed on polymer surface. Biofouling was found to depend on the season, loading being highest in the month of August. Chlorophyll was higher at FSI than at Port due to higher pollution levels and also being closer to the shores. Maximum weight loss was seen in LDPE (1.5-2.5%), followed by that in HDPE (0.5-0.8%) and finally in PP (0.5-0.6%) samples deployed at Port in the six month time period.     

Ethyl[tris(3‐tert‐butyl‐5‐methylpyrazol‐1‐yl)hydridoborato]zinc(II)

The X‐ray crystal structure of the title compound, [Zn(C₂H₅)(C₂₄H₄₀BN₆)], or Tp^tBu,MeZnEt [Tp^tBu,Me is tris(3‐tert‐butyl‐5‐methylpyrazolyl)hydridoborate], reveals a distorted tetrahedral geometry around the Zn atom. The Zn center is coordinated by three N atoms of the borate ligand and by one C atom of the ethyl group. The present structure and other tetrahedral Tp zinc alkyl complexes are compared with similar Ttz ligands (Ttz is 1,2,4‐triazolylborate), but no major differences in the structures are noted, and it can be assumed that variation of the substitution pattern of Tp or Ttz ligands has little or no influence on the geometry of alkylzinc complexes. Refinement of the structure is complicated by a combination of metric pseudosymmetry and twinning. The metrics of the structure could also be represented in a double‐volume C‐centered orthorhombic unit cell, and the structure is twinned by one of the orthorhombic symmetry operators not present in the actual structure. The twinning lies on the borderline between pseudomerohedral and nonmerohedral. The data were refined as being nonmerohedrally twinned, pseudomerohedrally twinned and untwinned. None of the approaches yielded results that were unambiguously better than any of the others: the best fit between structural model and data was observed using the nonmerohedral approach which also yielded the best structure quality indicators, but the data set is less than 80% complete due to rejected data. The pseudomerohedral and the untwinned structures are complete, but relatively large residual electron densities that are not close to the metal center are found with values up to three times higher than in the nonmerohedral approach.     

Polymer-surfactant layered heterostructures by electropolymerization of phenosafranine in Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of the water-soluble dye phenosafranine (PS) have been prepared by its adsorption from aqueous dye solution to an arachidic acid (AA) monolayer at the air-water interface. Atomic force microscopy (AFM) images of the LB films revealed the effect of change in pH of deposition on the degree of complexation of AA with the PS dye. Well-defined circular islands and holes were observed which disappeared with the increase in pH. Polarized absorption studies indicated that the dye molecules are oriented uniaxially with their long axis titled at a constant angle to the surface normal of the LB film. Within the restricted geometry of the LB film, the PS dye was electropolymerized to form a two-dimensional film of poly(phenosafranine) sandwiched between arachidic acid layers. The film was characterized by IR spectroscopy, cyclic voltammetry, and AFM. X-ray diffraction studies reveal the presence of a layer structure in the AA-PS LB film before and after polymerization. The polymer film showed highly anisotropic electrical conductivity of ca. 10 orders of magnitude. This indicates the formation of two-dimensional polyPS layers between arachidic acid layers resulting in a layered heterostructure film having alternate conducting and insulating regions. Also, the conductivity of the polyPS prepared from LB film was found to be approximately 2.5 times higher than the conductivity of polyPS prepared by solution polymerization method.     

Nanowear studies in chemically heterogeneous responsive polymeric brushes by surface force microscopy

In this study, we present nanowear studies using surface force microscopy (SFM), on nanoscopic thin films of reversibly switchable binary polymer brushes [polystyrene (PS) + poly(2-vinylpyridine) (P2VP)] and respective monobrushes [polystyrene and poly(2-vinylpyridine)] synthesized via “grafting to” method. The aim was to tune the wear in nanothin polymer brush surfaces. Therefore, the effect of conformational switching of PS + P2VP brush on treatment with selective solvents for PS and P2VP chains on the wear process was investigated. Wear process on thick spin-coated films of PS and P2VP was also investigated for comparison. Nanowear experiments were performed using SFM tip by repeating scans over the surface to follow the wear process closely. The wear process on different surfaces was explained on the basis of molecular entanglement as well as adhesion and friction on the sample surface. For spin-coated PS film as well as PS and PS + P2VP brush surfaces (treated with toluene) with molecular entanglements at surface, wear mechanism involved formation of ripples. However, in case of spin-coated P2VP films as well as P2VP and PS + P2VP brush surfaces (treated with ethanol) with no molecular entanglements at surface, wear occurred via removal of polymer chains and their accumulation at the rim. For PS + P2VP surface treated with acidic water, wear mechanism was complex and inhomogeneous ripple formation was followed by formation of heaps of polymeric material in the center of scanned area. The extent of wear as measured either by root mean square roughness of the surface or spacing between the ripples, increased with the number of scans for all the surfaces. Our study shows that wear mode of polymer brush surfaces is different for different polymers and can be controlled/tuned by the use of binary polymer brushes.     

Synthesis of fluorescent carbon dots via microwave carbonization of citric acid in presence of tetraoctylammonium ion,and their application to cellular bioimaging

A jelly-like form of carbon dots (C-dots) was prepared by microwave-assisted synthesis from citric acid in the presence of tetraoctylammonium bromide. The effect of the concentration of tetraoctylammonium bromide was examined. The synthesized carbon dots were characterized by UV–vis, XRD, FTIR, fluorescence and HR-TEM. Fluorescence extends from 350 to 600 nm, and the corresponding excitation wavelengths range from 300 to 460 nm. Quantum yields are at around 0.11. A cytotoxicity study showed carbon dots to be cell permeable and biocompatible which renders them appropriate for imaging applications. The dots were used to image HeLa cell lines via the blue fluorescence of the dots.

C-dots were synthesized from citric acid by microwave heating in presence of varying concentrations of tetraoctylammonium bromide (TOAB) as a micellar template. The excellent optical properties of the nanoparticles make them well suitable for bio-imaging of HeLa cells.