Four-operand parallel optical computing using shadow-casting technique

Optical shadow-casting (OSC) technique has shown excellent potential for optically implementing two-operand parallel logic gates and array logic operations. The 16 logic functions for two binary patterns (variables) are optically realizable in parallel by properly configuring an array of 2×2 light emitting diodes. In this paper, we propose an enhanced OSC technique for implementing four-operand parallel logic gates. The proposed system is capable of performing 2¹⁶ logic functions by simply programming the switching mode of an array of 4×4 light emitting diodes in the input plane. This leads to an efficient and compact realization scheme when compared to the conventional two-operand OSC system.     

Synthesis and Characterization of Organosilicon Substituted Fluorenyl Derivatives

Friedel‐Crafts cycloalkylation of biphenyl with 2,3‐dichlorobutyltrichlorosilane(Cl₃Si‐CH₂CHClCHClCH₃) at a temperature of 100°C in the presence of anhydrous aluminum chloride catalyst gave cyclized product, 9‐methyl‐9‐(2‐trichlorosilylethyl)fluorene 1a , in 33% yield. Methylation of 1a with nucleophilic reagent such as methyl magnesium chloride, gave 9‐methyl‐9‐(2‐trimethylsilylethyl)fluorene 2 while bromination of 2 with excess amount of bromine in DMF resulted in 2,7‐dibromo‐9‐methyl‐9‐(2‐trichlorosilyl)fluorene 3 in good yield. All the compounds were structurally identified by GC/MS, ¹H and ¹³C‐NMR spectroscopy.     

Effect of Manganese on Radiation Vulcanization of Natural Rubber

Manganese was added as a promoter to investigate physico-mechanical properties of radiation-vulcanized natural rubber latex (RVNRL) films. RVNRL films were prepared by the addition of Mn with the concentration range 0–30 ppm to natural rubber latex and irradiated with various radiation doses (0–20 kGy). Tensile strength, tear strength, and cross-linking density of the irradiated rubber films increased with increasing the concentration of Mn ions as well as radiation doses. In contrast, elongation at break, permanent set, and swelling ratio of the films were decreased under the same conditions. The concentration of Mn ions and radiation doses were optimized and found to be 20 ppm and 12 kGy, respectively. The maximum tensile and tear strengths of irradiated rubber films were observed as 29.12 MPa and 44.78 N/mm, respectively at the optimum conditions. The mechanical properties of the films increased markedly with the addition of Mn until they attained the highest values of 33.88 MPa and 54.77 N/mm, respectively. These enhancements, which reached approximately 20% at the most favorable conditions, can be explained by the effect of transition metals in view of Fajan’s rules regarding the covalent character of ionic bonds and suggest that the higher the difference in charges between cation and anion, the higher the ability to form distortion or polarization of ions.     

Gamma-Irradiated Gelatin-Based Films Modified by HEMA for Medical Application

The present article describes the synthesis and characterization of bi-component polymer systems based on gelatin films incorporated with 2-hydroxyethyl methacrylate (HEMA) monomer, developed for medical application. Gelatin films were prepared by the addition of HEMA of different concentrations (0–30 wt.%) and irradiated with various radiation doses (0–5 kGy). Tensile strength and tear strength of the irradiated gelatin films were found to increase with increasing HEMA up to 20 wt.% as well as radiation doses (1 kGy) as optimized. The maximum tensile and tear strengths of irradiated gelatin films with HEMA were found to be 79.1 MPa and 83.2 N/mm, respectively, at the optimum conditions, and these values were about double that of a reference film prepared without additives. In addition, morphological analysis was done by scanning electron microscopy (SEM) and showed how HEMA cemented and was covered with gelatin in the blend. Thermomechanical analysis was carried out to investigate the shifting of glass transition temperature (T_g) towards higher temperature due to HEMA addition, and the effect of this film was tested on the human body in order to determine whether it can be applied for medical purposes.     

Structure activity relationship of bergenin,p-hydroxybenzoyl bergenin, 11-O-galloylbergenin as potent antioxidant and urease inhibitor isolated from Bergenia ligulata

Ethanol extract of the aerial parts of Bergenia ligulata was subjected to solvent–solvent separation followed by various chromatographic techniques that lead to isolation of bergenine (1), p-hydroxybenzoyl bergenin (2), 11-O-galloylbergenin (3) and methyl gallate (4) as major constituents. Ethyl acetate fraction showed a dose-dependent urease inhibitory pattern with IC₅₀ value of 54μg/mL. Structures of compounds 1 and 3 were established by XRD and 2, 4 by NMR. All these compounds were subjected to DPPH scavenging activity, reducing power assay and urease inhibitory activity. The EC₅₀ 7.45 ± 0.2 μg/mL and 5.39 ± 0.28 μg/mL values in terms of antioxidant and reducing power, respectively, were less for 3. Compounds 1–3 showed moderate to significant urease inhibitory potential with IC₅₀ 57.1 ± 0.7, IC₅₀ 48.4 ± 0.3 and 38.6 ± 1.5. Antioxidant activities and urease inhibitory potential were investigated and compound 3 was found to be the most active.     

Rapid preparative isolation of erythrocentaurin from Enicostemma littorale by medium‐pressure liquid chromatography,its estimation by high‐pressure thin‐layer chromatography,and its α‐amylase inhibitory activity

Erythrocentaurin is a relatively simple natural product present among the members of Gentianaceae. A preparative method for the isolation of erythrocentaurin from the ethyl acetate fraction of Enicostemma littorale using medium‐pressure liquid chromatography has been reported. The method consisted of a simple step gradient from 10 to 20% ethyl acetate in n‐hexane. Using a 70 × 460 mm Si60 column, this method is capable of processing 20 g of material in <3 h (purity ≈ 97%). The recovery of erythrocentaurin was 87.77%. Estimation of erythrocentaurin in extracts and fractions based on high‐pressure thin‐layer chromatography was carried out on silica gel 60 F₂₅₄ plates with toluene/ethyl acetate/formic acid (80:18:2 v/v/v) as the mobile phase. The densitometric analysis was performed at 230 nm. A well‐separated compact band of erythrocentaurin appeared at R_f 0.54 ± 0.04. The analytical method showed good linearity in the concentration range of 200–1500 ng/band with a correlation coefficient of 0.99417. The limits of detection and quantification were found to be ≈60 and ≈180 ng/band, respectively. Erythrocentaurin exhibited a concentration‐dependent α‐amylase inhibition (IC₅₀ 1.67 ± 0.28 mg/mL). The outcome of the study should be considered for pharmacokinetic and biotransformation studies involving E. littorale.     

Bacilli as Biological Nano-factories Intended for Synthesis of Silver Nanoparticles and Its Application in Human Welfare

The search of eco-friendly technologies for nano-synthesis is significant to expand their applications in human welfare. Nowadays, various inorganic nanoparticles with beneficial features have been synthesized via physical, chemical, and biological means. Significant biological applications of silver nanoparticles include on-infectious microbes, target drug delivery, cancer and vector-borne disease control. Their syntheses have been tested from plant fungi, bacteria, and viruses. The bacterial mediated synthesis of silver, gold, zinc and other metal leads to a milestone in nano-medicines. Thus, in this review, we focus on the contribution of Bacilli in the synthesis of silver nanoparticles, the mechanism of action and their potential application in the welfare of human beings.     

Isolation,characterization, and quantification of curcuminoids and their comparative effects in cerebral ischemia

The study reports a rapid and short analytical technique for separation, characterization, and quantitation along with comparative pharmacological effect of curcuminoids in cerebral ischemia. Flash chromatography, using silica and diol columns along with gradient mobile phase, was utilized to separate three curcuminoids, i.e., curcumin (Cur), demethoxycurcumin (DMC), and bisdemethoxycurcumin (BDMC) for the first time. The separated peaks were monitored at 200–360?nm, whereas the purity of compounds (96.2–97.6%) was determined through qualitative analysis such as infrared and ¹H and ¹³C-nuclear magnetic resonance spectroscopy, mass spectrometry (MS), and differential scanning calorimetry. Furthermore, chitosan nanoparticles (CS-NPs) for curcuminoids were prepared and characterized through zeta sizer, zeta potential, scanning electron microscopy, and transmission electron microscopy. The developed ultra performance of liquid chromatography-electrospray ionization-quadrupole-time of flight-mass spectrometry/mass spectrometry (UPLC-ESI-Q-TOF-MS/MS) method showed simplified automation and shorter run time for Combi flash over conventional separation techniques. The CS-NPs for all the three curcuminoids and combined-curcuminoids (CCr) (combined and administered together for a synergistic effect), following intranasal administration in middle cerebral artery–occluded rats were evaluated for grip strength, locomotor activity, and histopathological examination where the anti-ischemic activity was observed, in terms of potency, for all three CS-NPs and CCr as CCr>Cur>DMC>>BDMC. Cur-CS-NPs exhibited more potency among Cur, DMC, and BDMC, whereas CCr was the more potent anti-ischemic drug compared to Cur, DMC, and BDMC. For Cur the characteristic activity is proposed because of the presence of methoxy group on the phenyl ring whereas for CCr it is synergistic effect of curcuminoids.     

Aggregation behavior and interaction of an amphiphilic drug imipramine hydrochloride with cationic surfactant cetyltrimethylammonium bromide: light scattering studies

The aggregation behavior and interaction of an amphiphilic antidepressant drug imipramine (IMP) hydrochloride with the cationic surfactant cetyltrimethylammonium bromide (CTAB) have been studied using light scattering (both static and dynamic) techniques. Due to rigid tricyclic hydrophobic moiety present in the molecule, the drug shows interesting association behavior. The static light scattering measurements show that the self-association of IMP commenced above a well-defined critical micellar concentration (CMC), which decreases with increasing the mole fraction of the CTAB surfactant. Both the excess Gibbs energy (ΔG(ex)) and the Gibbs energy of micellization (ΔG(M)°) are negative, and decrease with increasing mole fraction of the surfactant. The hydrodynamic diameters (d(h)) of the micellar aggregates were also evaluated using the dynamic light scattering measurements. The data indicate formation of larger aggregates by IMP and CTAB due to mixed micellization and subsequent micellar growth. The results have been analyzed using different models (viz., Clint, Motomura, Rosen, Rubingh, etc.) for mixed micelle formation.     

Radar transparent glass fabric reinforced polyetherimide/Cloisite 30B nanocomposites

High performance radar transparent materials (RTMs) are important materials for the fabrication of radomes, nosecones, etc. of high velocity aerospace vehicles. RTMs with good mechanical performance and temperature capability are required for such applications. Toward this, fabric reinforced nano‐reinforced matrix composites (FRNCs), using reinforcing E‐glass fabric in Cloisite 30B reinforced polyetherimide (PEI) nanocomposite matrix (GNRPEI), was prepared. The properties of GNRPEI were evaluated and compared with E‐glass fabric reinforced PEI composites (GRPEI) with special reference to their radar transparent character for aerospace applications. Tensile and flexural properties along with interlaminar shear strength of GRPEI were observed to be lower than those of GNRPEI. Thermal behavior of both the composites was similar in differential scanning calorimetry and thermal gravimetric analysis. But, in dynamic mechanical analysis, an increase in storage modulus and decrease in loss tangent were observed in GNRPEI compared to GRPEI. The values of dielectric constant and loss tangent of GNRPEI were lesser than those of GRPEI, but no significant difference was observed in the values of transmission and reflection losses for both the composites at 8–12 GHz frequency. FRNCs, based on organoclay reinforced PEI matrix, hold good promise as high performance RTMs. Copyright © 2010 John Wiley & Sons, Ltd.