A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

In the present study, carbon-coated lithium iron phosphate (LiFePO₄/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO₄/C using X-ray, neutron diffraction and ⁷Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO₄/C cathode delivered capacities of 162 mA h g^-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO₄/C production.     

Synthesis,spectroscopic characterization,X-ray crystal structure,biological screening and catalytic studies of organotin(IV) carboxylates of 3-(4-cyanophenyl) acrylic acid

A series of six organotin(IV) carboxylates [Me₂SnL₂] (1), [n-Bu₂SnL₂] (2), [n-Oct₂SnL₂] (3), [Me₃SnL] (4), n-Bu₃SnL (5) and [Ph₃SnL] (6), where L = 3-(4-cyanophenyl) acrylic acid have been synthesized and characterized by elemental analysis, FT-IR and NMR (¹H, ¹³C). The complex (4) was also analyzed by single crystal X-ray analysis which showed distorted trigonal bipyramidal geometry with polymeric bridging behavior. The complexes 1–6 were screened for antimicrobial activities and cytotoxicity. The results showed significant activity with few exceptions. The catalytic activity of complexes was assessed in transesterification reaction of Brassica campestris oil (triglycerides) to produce biodiesel (fatty acid methyl esters). The results showed that triorganotin(IV) complexes exhibited good catalytic activity than their di-analogues.     

Characterization of poly(2-vinylpyridine)-block-poly(methyl methacrylate) copolymers and blends of their homopolymers by liquid chromatography at critical conditions

Poly(2-vinylpyridine)s (P2VPs) are important polymers with extensive applications in modern day material science. P2VP is an exceptional case for liquid chromatography because of certain polar interactions with most of the stationary phases. In the present study, we established the critical adsorption point (CAP) of P2VP for the first time. The effectiveness of the method is demonstrated by analyses of blends and block copolymers of P2VP and PMMA. The CAP of PMMA is established for determination of molar mass of P2VP component of above mentioned blends and block copolymers. The methods successfully demonstrate the separation of both types of homopolymers from the rest of the samples in conjunction with the determination of molar mass distribution of noncritical block or component. Graphical Abstract

?     

Synthesis,characterization and biological properties of novel ON donor bidentate Schiff bases and their copper(II) complexes

Four novel ON donor Schiff bases (E)-3-((4-phenoxyphenylimino)methyl)benzene-1,2-diol (HL₁),(E)-3-((4-(4-biphenyloxy)phenyliminomethyl)benzene-1,2-diol (HL₂), (E)-3-((4-naphthoxyphenylimino)methyl)benzene-1,2-diol (HL₃), (E)-3-((4-(2-naphthoxy)phenylimino)methyl)benzene-1,2-diol (HL₄) and their copper(II) complexes bis((E)-3-((4-phenoxyphenylimino)methyl)benzene-1,2-diol) copper(II) (Cu(L₁)₂) bis((E)-3-((4-(4-biphenyloxy)phenylimino)methyl)benzene-1,2-diol) copper(II) (Cu(L₂)₂), bis((E)-3-((4-naphthoxyphenylimino)methyl)benzene-1,2-diol) copper(II) (Cu(L₃)₂), bis((E)-3-((4-(2-naphthoxy)phenylimino)methyl)benzene-1,2-diol) copper(II) (Cu(L₄)₂) have been synthesized and characterized by spectroscopic (FTIR, NMR, UV–visible) and elemental analysis. The crystal structures of HL₁, HL₂, HL_3, and HL₄ have been determined, which reveal intramolecular N-H?O (HL₁, HL₂, HL_3, and HL₄) hydrogen bonds in the solid state. Keto-amine and enol-imine tautomerism is exhibited by the Schiff bases in solid and solution states. The Schiff bases and their copper(II) complexes have been screened for their biological activities. In antimicrobial assays (antibacterial and antifungal), HL₄ showed promising results against all strains through dual inhibition property while the rest of the compounds showed activity against selective strains. On the other hand, in cytotoxic, DPPH, and inhibition of hydroxyl (OH) free radical-induced DNA damage assays, the results were found significantly correlated with each other, i.e. the ligands HL₁ and HL₂ showed moderate activity while their complexes Cu(L₁)₂ and Cu(L₂)₂ exhibited prominent increase in activity. As the results of these assays are supporting each other, it represents the strong positive correlation and antioxidant nature of investigated compounds.     

Physicochemical investigation of sulfonamide-derived compounds interacting with conventional cationic surfactants in aqueous media

The sulfonamide core in compounds is effective synthons, which offer exciting perspectives in chemotherapeutic and pharmacological research. In this study, we investigated the molecular interaction of potent sulfonamide derivatives (SDs), 2-benzenesulfonamido-3-methylbutyric acid (BSB) and tetraaquabis{3-methyl-2-[(phenylsulfonyl)amino]butanoate}copper(II) (Cu-BSB), with cationic surfactants, cetyltrimethyl ammonium bromide (CTAB) and ethylhexadecyl dimethyl ammonium bromide (EHDAB), using UV-visible spectroscopy and steady-state fluorescence measurements. Various mathematical models were applied to quantify the effect of cationic surfactants on physicochemical characteristics of BSB and Cu-BSB. These interactions were confirmed by estimating the partition coefficient (K_x), binding capacities (K_b), Stern-Volmer quenching constant (K_sv), and related Gibbs free energies (ΔG_b). The in-depth mechanism revealed that the binding mode in SD–surfactants combinational system is spontaneous and quenching exists in static mode initiated by ground-state complex formation. We believe that the true knowledge of host–guest interaction mechanisms concerning model membrane with entrapped moiety can help in better understanding of molecular recognition in related phospholipid membrane models.     

Determination of haloacetic acids in water using layered double hydroxides as a sorbent in dispersive solid‐phase extraction followed by liquid chromatography with tandem mass spectrometry

In the present study, highly efficient and simple dispersive solid‐phase extraction procedure for the determination of haloacetic acids in water samples has been established. Three different types of layered double hydroxides were synthesized and used as a sorbent in dispersive solid‐phase extraction. Due to the interesting behavior of layered double hydroxides in an acidic medium (pH?4), the analyte elution step was not needed; the layered double hydroxides are simply dissolved in acid immediately after extraction to release the analytes which are then directly introduced into a liquid chromatography with tandem mass spectrometry system for analysis. Several dispersive solid‐phase extraction parameters were optimized to increase the extraction efficiency of haloacetic acids such as temperature, extraction time and pH. Under optimum conditions, good linearity was achieved over the concentration range of 0.05–100 μg/L with detection limits in the range of 0.006–0.05 μg/L. The relative standard deviations were 0.33–3.64% (n = 6). The proposed method was applied to different water samples collected from a drinking water plant to determine the concentrations of haloacetic acids.     

Isocassiaoccidentalin B,A New C‐Glycosyl Flavone Containing a 3‐Keto Sugar,and Other Constituents from Cassia nomame

A new C‐glycosyl flavone containing a 3‐keto sugar, isocassiaoccidentalin B ( 1 ), was isolated from whole Cassia nomame (Sieber ) Honda plants, along with eleven known compounds, including two flavonoids ( 2 and 3 ), five flavonoid glycosides ( 4  –  8 ), two chalcones ( 9 and 10 ), and two phenylpropanoids ( 11 and 12 ). The chemical structures of all compounds were determined via 1D‐ and 2D‐NMR, and ESI‐MS. Among these, compounds 2 , 3 , 7 , and 8 were found to be the most potent in inhibiting nitric oxide release. Compounds 1 , 2 , 4 , 8 , 9 , and 10 showed significant free‐radical scavenging activity.     

A novel ditopic ring-expanded N-heterocyclic carbene ligand-assisted Suzuki-Miyaura coupling reaction in aqueous media

A series of seven-membered ditopic ring-expanded N-heterocyclic carbene (dre-NHC) precursors, bearing sterically demanding and electron-rich aryl groups, were synthesised in moderate yields via the reaction of 1,2,4,5-tetrakis(bromomethyl)benzene with the corresponding N,N′-diarylformamidines in the presence of K₂CO₃ in acetonitrile under an air atmosphere. All new compounds were characterised by HRMS, NMR spectroscopy, and microanalysis, as well as X-ray crystallography for compound 1c. The development of an efficient catalytic system for the Suzuki-Miyaura coupling reaction of aryl chlorides with various boronic acids was also investigated using the in situ generated dre-NHC ligands.     

A review on <Superscript>90</Superscript>Y-labeled compounds and biomolecules

The field of therapeutic nuclear medicine is emerging rapidly as choice of treatment in oncology and other cellular malignancies. The growth of this branch of nuclear medicine is greatly facilitated by the introduction of a number of new radiopharmaceuticals and radionuclides. ⁹⁰Y-radiopharmaceuticals have confirmed their worth in medical and clinical areas in a very short span of time. The ⁹⁰Y is a radioisotope widely used for therapeutic purposes and considerable perfection has been made to understand the chemistry of ⁹⁰Y-labeled radiopharmaceuticals. The development of these radiopharmaceuticals can be made favorable by using appropriate buffer, incubation period, optimal pH, specific activity and reaction temperature. In this review, we have discussed the preparation of range of ⁹⁰Y transporting biological molecules such as antibodies radiolabeled peptides, antigens and microsphere with their clinical applications.