Empirical model for the current-voltage characteristic of resonant-tunneling devices

An empirical model is presented for the current-voltage characteristics of resonanttunneling (RT) devices. By using this model an analytical study of millimeter-band electronic circuits employing RT devices can be performed.     

The influence of synthetic conditions on the stability of methotrexate-monoclonal antibody conjugates determined by reversed phase high performance liquid chromatography.

Methotrexate (MTX) has been convalently attached to an IgG-type monoclonal antibody (791T/36) directed to tumour-associated antigen gp72. Conjugates were synthesized by the active ester method using MTX N-succinimidyl ester at various pH values (7.5-10.5). Following purification by gel filtration, high performance liquid chromatography was used to assess the free drug or its derivatives in samples of MTX-791T/36 conjugates previously treated (or not) with hydroxylamine. Quantitative analysis, performed on a reversed phase column (pore size 300 A) with isocratic acetonitrile-sodium acetate buffer (pH 4.8) as mobile phase, indicated no detectable amount of free methotrexate in hydroxylamine-treated conjugates even six months after their preparation. Similar observations were made with conjugates, whose synthesis were performed at pH greater than or equal to 10. In contrast, the presence of increasing amounts of drug/metabolite could be demonstrated in samples produced at lower pH values. Based on these findings, the pH-dependent kinetics of MTX release has been determined and used to design conditions under which stable MTX-791T/36 conjugates could be prepared without hydroxylamine reaction.     

Studies on recoil proton tracks in NTA films with the T(d,n)He reaction

Recoil proton tracks in nuclear emulsion are counted by scanning them using strip, square or circular field of view of optical microscope. In this paper, the overestimate due to the edge effects in counting recoil proton tracks at different neutron energies produced from the T(d,n)⁴He reaction has been determined by measuring the true track density in NTA film. The overestimate has also been calculated using the measured value of the mean projected track length (L) in the film. The percentage of measured overestimates has been compared with those obtained by calculation and the results agree reasonably well. Fading effect in NTA film has been studied and found to be 22% more in the summer than in the winter season. A great reduction in fading rate could be achieved if the films are desiccated and sealed in highly pure dry nitrogen maintained at an over-pressure of 1000 Pa to reduce water vapour ingress. After the edge effect correction, the sensitivity of NTA film has been calculated from (1.72±0.08)×10⁻³ tracksn⁻¹ to (1.97±0.16)×10⁻³ tracksn⁻¹ in the neutron energy ranges from 15.91 to 18.88 MeV. The response was found to be from 0.24±0.02 trackscm⁻² permSv to 0.26±0.01 trackscm⁻² permSv in the same energy range.     

Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

MITATT mode in DDR heterostructure Impatt

Large signal characterisation of double heterostructure DDR Impatt diode has been carried out in the millimeter-wave range considering the MITATT mode of operation. The structure of the device is p⁺-p₂-p₁-n₁-n₂-n⁺ where impact ionisation and tunneling takes place in the p₁-n₁ region. In this study we have considered two well-known heterostructures, e.g., InP/GaInAs/InP and InP/InGaAsP/InP and one nonconventional structure GaAs/InP/GaAs. The theoretical results of the performances of these devices as regards of output power, efficiency, and negative conductance revealed that the structures are quite promising as the source of power in the millimeter-wave range. The analysis may be used for other mm wave DDR heterostructure Impatts.     

Barium(II)–2,4‐dinitrophenolate–18‐crown‐6 at 183 K

The title compound, bis(2,4‐dinitrophenolato‐κ²O,O′)(1,4,7,10,13,16‐hexaoxadecane‐κ⁶O)barium(II), [Ba(C₆H₃N₂O₅)₂(C₁₂H₂₄O₆)], is a 1:1 complex of barium(II)–2,4‐di­nitro­phenolate and 1,4,7,10,13,16‐hexaoxa­cyclo­octa­decane (18‐crown‐6). Its structure is located on a crystallographic inversion centre. The temperature dependence of the crystal structure has been studied. The monoclinic β angle of the P2₁/­n space group increases with increasing temperature. The packing structure of the complex is stabilized by intermolecular C—H?O interactions.     

An optimal repeat inspection plan with several classifications

Multicharacteristic critical components exist in many systems. Such components could be a part of an aircraft, space shuttle or a gas ignition system. A component is critical if it causes disaster or a very high cost upon failure. In this paper, a new inspection plan for critical multicharacteristic components is presented. A mathematical model that depicts the plan is developed. An algorithm is proposed for finding the optimal number of repeat inspections and the sequence of characteristics for inspection that minimizes expected total cost per accepted component. The expected cost consists of the cost of inspection and the cost of misclassifications. The inspection plan and the model developed generalize existing models in the literature and provide a more realistic formulation. An example is given to demonstrate the plan and the model.     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006