Enantioselective synthesis of functionalized γ-butyrolactones

Sharpless asymmetric dihydroxylation and aminohydroxylation of (E)-dimethyl-2-alkylidene glutarates 2 were shown to afford enantio-enriched or enantiopure highly functionalized γ-butyrolactones 3 and 7.     

Single nanocrystal arrays on patterned poly(ethylene glycol) copolymer microstructures using selective wetting and drying

Single nanocrystal arrays were fabricated on sub-microwells of poly(ethylene glycol) (PEG) copolymer using selective wetting on the hydrophilic regions of the exposed substrate surface and subsequent drying. Templates were produced by molding a thin film of a PEG-based random copolymer on hydrophilic substrates such as glass or silicon dioxide. The polymeric microstructures provide a topographical barrier around the well, which makes it possible to create nanocrystal arrays with controlled geometrical features. The size of the nanocrystal was found to decrease with decreasing well size and also decrease with decreasing topological height. A simple empirical equation was derived to predict the size of the crystal as a function of the pattern size and height, which is in good agreement with the experimental data.     

Comparison of analytical techniques to quantify malondialdehyde in milk powders

Several analytical methods were compared to quantify malondialdehyde (MDA) in milk powders. Modified thiobarbituric acid (TBA) methods, using either visible spectrophotometry (direct absorbance reading or after third derivative transformation of the spectrum) or HPLC, required derivatisation at elevated temperature, which appeared to catalyse artefactual MDA formation and thus overestimate the MDA content. In contrast to the TBA derivatisation method, the measurement of MDA as the dinitrophenylhydrazone derivative by HPLC or as the phenylhydrazone product by GC-MS with a deuterated internal standard resulted in lower estimates in the ranges of 2-17- and 3-30-fold, respectively; apparently due to the milder derivatisation conditions. The estimates of MDA determined by both HPLC-UV and GC-MS techniques result in lower values which are similar in magnitude even though the GC-MS technique is more sensitive.     

Umbellactal, a novel diterpenoid from the Formosan soft coral Xenia umbellata

Umbellactal, isolated from the soft coral Xenia umbellata, is an unprecedented diterpenoid. The structure of umbellactal was established by extensive analysis of spectroscopic data.     

The unusual cyclic products from tetra- and penta-peptides of α-methylalanine

Tetra- and pentapeptides of α-methylalanine give with PCl₅, SOCl₂ etc. intermediates which, with or without loss of amino adds, lead to bi- and tricyclic products containing imidazole and piperazine rings through different routes.     

X=Y=ZH Systems as potential 1,3-dipoles. Part 58: Cycloaddition route to chiral conformationally constrained (R)-pro-(S)-pro peptidomimetics

Imines of (1S,9S)-t-butyl-9-amino-octahydro-6,10-dioxo-6H-pyridazino[1,2-a][1,2]diazepine-1-carboxylate undergo thermal (toluene, 110°C) or LiBr-DBU catalysed (MeCN, room temperature) regio- and stereo-specific cycloaddition to a range of chiral dipolarophiles giving enantiopure spiro-cycloadducts in excellent yield. The reactions proceed via intermediate NH azomethine ylides and litho azomethine ylides, respectively and results in the multiplication of chiral centres from 2 (one of which is lost in the process) to 5.     

Ab initio Computational Modeling of Glyphosate Analogs: Conformational Perspective

A historical perspective on the application of conformational analysis to structure-based ligand design approach is presented. The application of isodensity molecular electrostatic potential surfaces with the conformational energy surfaces (CES) have allowed us to reach pertinent conclusions for aiding synthetic and biochemical studies. Here we illustrate such an application on the modeling of the potent analogs of an important, environmentally stringent herbicidal compound glyphosate by constructing conformational energy surfaces. The systems were modeled by substituting F, Cl, and NH— OH moiety to the position of pharmacophoric nitrogen center in glyphosate structure. All the calculations were thoroughly performed with ab initio MO theory at Hartree–Fock method using 3-21G(d) basis functions. On the basis of the results, we identified the bioactive conformations for N-fluoro-glyphosate, N-chloro-glyphosate, and N-hydroxyamino-glyphosate as (−38^∘, 77^∘), (−61^∘, 111^∘), and (−167^∘, −169^∘), respectively. Geometry optimization of certain selected conformations of these compounds using hybrid DFT method with 6–31+G(d) basis functions provides nearly equal values of φ and ψ. Moreover, the results indicate that the global minimum structures of N-fluoro and N-chloro analogs of glyphosate show cyclic conformation whereas the N-hydroxyamino-glyphosate global minimum structure shows spyrocyclic and zig-zag conformation. Also, the predicted bioactive conformation of N-hydroxyamino analog optimally overlaps with glyphosate backbone in EPSPS complex with 0.1 Å RMSD value. However, the other two compounds slightly deviate from the backbone of glyphosate with RMSD of 0.92 Å for N-fluoro-glyphosate and 0.83 Å for N-chloro-glyphosate. The linear N-hydroxyamino-glyphosate exhibits relatively more number of intermolecular hydrogen bond interactions as compared to the other two analogs. Further, comparison of CES of previously studied glyphosate analogs such as N-hydroxy-glyphosate (2.2 μM) and N-amino-glyphosate (0.61 μM) with the present systems reveals the order of activity as: N-hydroxyamino-glyphosate > N-fluoro-glyphosate > N-chloro-glyphosate based on CES flexibility. Also, the calculated heats of formation of N-fluoro-glyphosate, N-chloro-glyphosate, and N-hydroxyamino-glyphosate are −288, −209, and −288 kcal/mol, respectively, which clearly indicate that the N-hydroxyamino and N-fluoro analogs of glyphosate are thermodynamically more stable than N-amino-glyphosate (−278 kcal/mol).     

Influence of hydrophobe content on the solution rheology of hydrophobically modified terpolymer of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride

Rheological properties of hydrophobically modified copolymer of SO₂, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride were studied. The influence of hydrophobe content (HP) and polymer concentration was investigated. Polymers with HP content in the range 1.5-5% were examined and the concentration was varied in the range 2-5 wt%. Both dynamic and steady-shear experiments were performed in ARES rheometer. Copolymers were observed to exhibit typical viscoelastic behavior even with low HP content. Both the dynamic viscosity, η′ and storage modulus, G′, increase with the increase of both the polymer concentration and the HP content of the system. The viscosity of the high HP content polymer showed a strong shear dependency, while G′ was a weak function of frequency and gel-like behavior was observed. The zero-shear viscosity, η₀, showed a strong concentration dependency (η₀ ∼ ?^α; 1.1 < α < 5.9). The concentration dependency of η₀ suggests that intermolecular association is dominant in the high HP content polymer. Control of the HP content and polymer concentration of this class of polymers can lead to a wide range of interesting rheological properties.     

Confirmation of eprinomectin, moxidectin, abamectin, doramectin, and ivermectin in beef liver by liquid chromatography/positive ion atmospheric pressure chemical ionization mass spectrometry

A liquid chromatographic (LC) multiresidue screening procedure was developed for determination of eprinomectin, moxidectin, abamectin, doramectin, and ivermectin in beef liver at 0, 25, 50, and 100 ppb levels. A procedure using low resolution LC/atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) was developed with further purification steps added to the quantitative LC method to confirm residues. Acetonitrile extracts of liver, prior to derivatization for LC analysis, were further purified by using a C8 solid-phase extraction cartridge and an alumina-B cartridge. The purified extract was analyzed by injection into an LC/positive ion APCI MS. Identity of the compound was confirmed by comparison of its retention time and relative intensity data with those of a standard or recovery from a fortified control liver sample. Anthelmintic drugs in acetonitrile extracts of liver containing eprinomectin, moxidectin, abamectin, doramectin, and ivermectin at 25 ppb, the lowest level of fortification used in the LC determinative method, were successfully confirmed.     

Synthesis of trimethyl (2S,3R)- and (2R,3R)-[2-H1]-homocitrates and the corresponding dimethyl ester lactones—towards elucidating the stereochemistry of the reaction catalysed by homocitrate synthase and by the Nif-V protein

Trimethyl (2S,3R)- and (2R,3R)-[2-²H₁]-homocitrates, 10b and 10c respectively, and dimethyl (2S,3R)- and (2R,3R)-[2-²H₁]-homocitric lactones, 11b and 11c respectively, have been synthesised from shikimic acid and [2-²H]-shikimic acid by a route which defines the stereochemistry of the two chiral centres in each compound. The NMR spectra of these products will enable the stereochemistry of the biological reaction catalysed by homocitrate synthase and by the protein from the nifV gene to be elucidated.