Oxidation of Styrene to Benzaldehyde Catalyzed by Schiff Base Functionalized Triazolylidene Ni(II) Complexes

Four new Schiff base functionalized 1,2,3-triazolylidene nickel complexes, [Ni-(L₁NHC)₂](PF₆)₂; 3, [Ni-(L₂NHC)₂](PF₆)₂; 4, [Ni-(L₃NHC)](PF₆)₂; 7 and [Ni-(L₄NHC)](PF₆)₂; 8, (where L₁NHC = (E)-3-methyl-1-propyl-4-(2-(((2-(pyridin-2-yl)ethyl)imino)methyl)phenyl)-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 1, L₂NHC = (E)-3-methyl-4-(2-((phenethylimino)methyl)phenyl)-1-propyl-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 2, L₃NHC = 4,4′-(((1E)-(ethane-1,2-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 5, and L₄NHC = 4,4′-(((1E)-(butane-1,4-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 6), were synthesised and characterised by a variety of spectroscopic methods. Square planar geometry was proposed for all the nickel complexes. The catalytic potential of the complexes was explored in the oxidation of styrene to benzaldehyde, using hydrogen peroxide as a green oxidant in the presence of acetonitrile at 80 °C. All complexes showed good catalytic activity with high selectivity to benzaldehyde. Complex 3 gave a conversion of 88% and a selectivity of 70% to benzaldehyde in 6 h. However, complexes 4 and 7–8 gave lower conversions of 48–74% but with higher (up to 90%) selectivity to benzaldehyde. Results from kinetics studies determined the activation energy for the catalytic oxidation reaction as 65 ± 3 kJ/mol, first order in catalyst and fractional order in the oxidant. Results from UV-visible and CV studies of the catalytic activity of the Ni-triazolylidene complexes on styrene oxidation did not indicate any clear possibility of generation of a Ni(II) to Ni(III) catalytic cycle.     

Thermally Activated Delayed Fluorescence Triplet State Excitons for High-Performance Organic Photodetectors: A Novel Strategy

Photoinduced charge-trapping is a promising strategy for boosting the photosensitivity of organic photodetectors at the expense of their response time. In addition, they have a low carrier extraction yield due to the formation of low-energy triplet excitons through the recombination of a photogenerated hole–electron pair. Materials with thermally activated delayed fluorescence (TADF) exhibit a long-lived (≈µs) excited spin-triplet nearly iso-energetically aligned with that of an excited spin-singlet, which results in suppressed exciton losses and is widely used in organic light-emitting diodes. The extraction and population of triplet state excitons in TADFs is a sought-after but underexplored aspect of photoinduced gating in photodetectors. A 1,2,3,5-tetrakis(carbazol-9-yl)4,6-Dicyanobenzene (4CzIPN) TADF blend with a high-mobility Poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-C₁₄) polymer via bulk type-II offset can increase free carrier extraction yield (fast response) and retain trapped electrons in TADF triplet states (high gain). The PBTTT-C₁₄/4CzIPN ultraviolet photodetector device maintains a trade-off between high photogain (≈10³) and fast response time (79 ms) at 300 nm while operating at a shallow dark current (≈pA). Furthermore, the device shows high external quantum efficiency (≈10⁴ %) and detectivity (≈10¹¹ Jones) for low light power (<pW). The innovative application of TADF material can lead to exciting new developments in organic-based high-performance photodetection.     

Electroanalysis of Ibuprofen and Its Interaction with Bovine Serum Albumin

The current work presents a sensitive, selective, cost-effective, and environmentally benign protocol for the detection of ibuprofen (IBP) by an electrochemical probe made of a glassy carbon electrode modified with Ag-ZnO and MWCNTs. Under optimized conditions, the designed sensing platform was found to sense IBP up to a 28 nM limit of detection. The interaction of IBP with bovine serum albumin (BSA) was investigated by differential pulse voltammetry. IBP−BSA binding parameters such as the binding constant and the stoichiometry of complexation were calculated. The results revealed that IBP and BSA form a single strong complex with a binding constant value of 8.7 × 10¹³. To the best of our knowledge, this is the first example that reports not only IBP detection but also its BSA complexation.     

Wet-Chemical Synthesis of TiO2/PVDF Membrane for Energy Applications

To satisfy the ever-increasing energy demands, it is of the utmost importance to develop electrochemical materials capable of producing and storing energy in a highly efficient manner. Titanium dioxide (TiO₂) has recently emerged as a promising choice in this field due to its non-toxicity, low cost, and eco-friendliness, in addition to its porosity, large surface area, good mechanical strength, and remarkable transport properties. Here, we present titanium dioxide nanoplates/polyvinylidene fluoride (TiO₂/PVDF) membranes prepared by a straightforward hydrothermal strategy and vacuum filtration process. The as-synthesized TiO₂/PVDF membrane was applied for energy storage applications. The fabricated TiO₂/PVDF membrane served as the negative electrode for supercapacitors (SCs). The electrochemical properties of a TiO₂/PVDF membrane were explored in an aqueous 6 M KOH electrolyte that exhibited good energy storage performance. Precisely, the TiO₂/PVDF membrane delivered a high specific capacitance of 283.74 F/g at 1 A/g and maintained capacitance retention of 91% after 8000 cycles. Thanks to the synergistic effect of TiO₂ and PVDF, the TiO₂/PVDF membrane provided superior electrochemical performance as an electrode for a supercapacitor. These superior properties will likely be used in next-generation energy storage technologies.     

Investigation of the Effect of Substituents on Electronic and Charge Transport Properties of Benzothiazole Derivatives

A series of new benzothiazole-derived donor–acceptor-based compounds (Comp1–4) were synthesized and characterized with the objective of tuning their multifunctional properties, i.e., charge transport, electronic, and optical. All the proposed structural formulations (Comp1–4) were commensurate using FTIR, ¹H NMR, ¹³C NMR, ESI-mass, UV–vis, and elemental analysis techniques. The effects of the electron-donating group (-CH₃) and electron-withdrawing group (-NO₂) on the optoelectronic and charge transfer properties were studied. The substituent effect on absorption was calculated at the TD-B3LYP/6-31+G** level in the gas and solvent phases. The effect of solvent polarity on the absorption spectra using various polar and nonpolar solvents, i.e., ethanol, acetone, DMF, and DMSO was investigated. Light was shed on the charge transport in benzothiazole compounds by calculating electron affinity, ionization potential, and reorganization energies. Furthermore, the synthesized compounds were used to prepare thin films on the FTO substrate to evaluate the charge carrier mobility and other related device parameters with the help of I-V characteristic measurements.     

Compritol-Based Alprazolam Solid Lipid Nanoparticles for Sustained Release of Alprazolam: Preparation by Hot Melt Encapsulation

The current study was designed to investigate the feasibility of incorporating the water-insoluble lipophilic drug Alprazolam (Alp) into solid lipid nanoparticles (SLNs) to offer the combined benefits of the quick onset of action along with the sustained release of the drug. Therefore, compritol-based alprazolam-loaded SLNs (Alp-SLNs) would provide early relief from anxiety and sleep disturbances and long-lasting control of symptoms in patients with depression, thereby enhancing patient compliance. The optimized Alp-SLNs analyzed by DLS and SEM showed consistent particle size of 92.9 nm with PI values and standard deviation of the measurements calculated at <0.3 and negative surface charge. These characteristic values demonstrate the desired level of homogeneity and good physical stability of Alp-SLNs. The SLNs had a good entrapment efficiency (89.4%) and high drug-loading capacity (77.9%). SEM analysis revealed the smooth spherical morphology of the SLNs. The physical condition of alprazolam and absence of interaction among formulation components in Alp-SLNs was confirmed by FTIR and DSC analyses. XRD analysis demonstrated the molecular dispersion of crystalline alprazolam in Alp-SLNs. The in vitro release study implied that the release of Alp from the optimized Alp-SLN formulation was sustained as compared to the Alp drug solution because Alp-SLNs exhibited sustained release of alprazolam over 24 h. Alp-SLNs are a promising candidate to achieve sustained release of the short-acting drug Alp, thereby reducing its dosing frequency and enhancing patient compliance.     

Fluorine extraction from organofluorine molecules to make fluorinated clusters in yttrium MOFs

A new rare earth based two-dimensional coordination network and a three-dimensional metal–organic framework (MOF) have been synthesized using bicinchoninic acid (BCA) and yttrium(iii) ions. Yttrium dimer nodes are formed in the absence of a modulator, resulting in a 2D layered coordination network (Y–BCA-2D). The presence of fluorinating agents, e.g., 2-fluorobenzoic acid (2-FBA), 2,6-difluorobenzoic acid (2,6-DFBA), and perfluorohexanoic acid (PFHxA) result in μ₃-F bridged metal hexaclusters (Y₆F₈) that form a three-dimensional MOF (Y–BCA-3D). It was found that Y³⁺ can break highly stable C–F bonds in aromatic and aliphatic fluorinated compounds. Single-crystal X-ray diffraction (SC-XRD) shows the presence of fluorine in the metal cluster which was confirmed by energy dispersive X-ray spectroscopy (EDS). High resolution X-ray photoelectron spectroscopy (XPS) and ¹⁹F Nuclear Magnetic Resonance (NMR) also verify the presence of metal–fluorine bonds in the cluster. The Y–BCA-3D MOF selectively adsorbs CO₂ but not N₂.

The reaction of yttrium(iii) and linker makes a 2D metal–organic framework. The addition of fluorinated modulators result in fluorine extraction from modulators and makes a 3D-MOF.     

Pharmacological Properties of 4′, 5, 7-Trihydroxyflavone (Apigenin) and Its Impact on Cell Signaling Pathways

Plant bioactive compounds, particularly apigenin, have therapeutic potential and functional activities that aid in the prevention of infectious diseases in many mammalian bodies and promote tumor growth inhibition. Apigenin is a flavonoid with low toxicities and numerous bioactive properties due to which it has been considered as a traditional medicine for decades. Apigenin shows synergistic effects in combined treatment with sorafenib in the HepG2 human cell line (HCC) in less time and statistically reduces the viability of tumor cells, migration, gene expression and apoptosis. The combination of anti-cancerous drugs with apigenin has shown health promoting potential against various cancers. It can prevent cell mobility, maintain the cell cycle and stimulate the immune system. Apigenin also suppresses mTOR activity and raises the UVB-induced phagocytosis and reduces the cancerous cell proliferation and growth. It also has a high safety threshold, and active (anti-cancer) doses can be gained by consuming a vegetable and apigenin rich diet. Apigenin also boosted autophagosome formation, decreased cell proliferation and activated autophagy by preventing the activity of the PI3K pathway, specifically in HepG2 cells. This paper provides an updated overview of apigenin’s beneficial anti-inflammatory, antibacterial, antiviral, and anticancer effects, making it a step in the right direction for therapeutics. This study also critically analyzed the effect of apigenin on cancer cell signaling pathways including the PI3K/AKT/MTOR, JAK/STAT, NF-κB and ERK/MAPK pathways.     

In Vitro Evaluation of Curcumin Encapsulation in Gum Arabic Dispersions under Different Environments

Biopolymers, especially polysaccharides (e.g., gum Arabic), are widely applied as drug carriers in drug delivery systems due to their advantages. Curcumin, with high antioxidant ability but limited solubility and bioavailability in the body, can be encapsulated in gum Arabic to improve its solubility and bioavailability. When curcumin is encapsulated in gum Arabic, it is essential to understand how it works in various conditions. As a result, in Simulated Intestinal Fluid and Simulated Gastric Fluid conditions, we investigated the potential of gum Arabic as the drug carrier of curcumin. This study was conducted by varying the gum Arabic concentrations, i.e., 5, 10, 15, 20, 30, and 40%, to encapsulate 0.1 mg/mL of curcumin. Under both conditions, the greater the gum Arabic concentration, the greater the encapsulation efficiency and antioxidant activity of curcumin, but the worse the gum Arabic loading capacity. To achieve excellent encapsulation efficiency, loading capacity, and antioxidant activity, the data advises that 10% is the best feasible gum Arabic concentration. Regarding the antioxidant activity of curcumin, the findings imply that a high concentration of gum Arabic was effective, and the Simulated Intestinal Fluid brought an excellent surrounding compared to the Simulated Gastric Fluid solution. Moreover, the gum Arabic releases curcumin faster in the Simulated Gastric Fluid condition.