Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

Harmonic and intermodulation generation in quantum-well diodes

A Fourier-series model describing the current-voltage characteristic of a quantum-well diode (QWD) is presented. Using this model, closed-form expressions are obtained for the harmonic and intermodulation performance of a QWD excited by a multisinusoidal voltage superimposed on a dc voltage.     

An electrolytic device for preparation of hydrogen and oxygen from water for isotopic analysis

An electrolytic device for decomposition of water has been developed which readily gives hydrogen and oxygen for isotopic measurement with a mass spectrometer. A 20-mul sample can be decomposed quantitatively in 10 min with good reproducibility. The results produced are comparable with those obtained by reduction with uranium.     

Microbial Transformation of Sesquiterpenes, (−)‐Ambrox® and (+)‐Sclareolide

The microbial transformation of (?)‐Ambrox^® ( 1 ), a perfumery sesquiterpene, by a number of fungi, by means of standard two‐stage‐fermentation technique, afforded ambrox‐1α‐ol ( 2 ), ambrox‐1α,11α‐diol ( 3 ), ambrox‐1α,6α‐diol ( 4 ), ambrox‐1α,6α,11α‐triol ( 5 ), ambrox‐3‐one ( 6 ), ambrox‐3β‐ol ( 7 ), ambrox‐3β,6β‐diol ( 8 ), 13,14,15,16‐tetranorlabdane‐3,8,12‐triol ( 9 ), and sclareolide ( 10 ) (Schemes 1 and 2). Further incubation of compound 10 with Cunninghamella elegans afforded 3‐oxosclareolide ( 11 ), 3β‐hydroxysclareolide ( 12 ), 2α‐hydroxysclareolide ( 13 ), 2α,3β‐dihydroxysclareolide ( 14 ), 1α,3β‐dihydroxysclareolide ( 15 ), and 3β‐hydroxy‐8‐episclareolide ( 16 ) (Scheme 3). Metabolites 2 – 5, 12, 13 , and 16 were found to be new compounds. The major transformations include a reaction path involving hydroxylation, ether‐bond cleavage and inversion of configuration. Metabolites 11 – 16 of sclareolide showed significant phytotoxicity (Table 1). The structures of the metabolites were characterized on the basis of spectroscopic techniques.     

Synthesis of a novel cis-proline-derived cyclic type VI beta-turn mimic via ring-closing metathesis

A cis-proline derived cyclic mimic of a type VI beta-turn is synthesized via a ring-closing metathesis reaction. The solution NMR conformational study indicates that the major conformer of the cyclic peptide adopts a type VIa beta-turn in CDCl(3) and a type VIb beta-turn in DMSO-d(6).     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

Uptake of Tm(III) ions onto polyurethane foam from H2O - ethanol mixture containing 1-(2-pyridylazo)-2-naphthol (PAN)

Summary The sorption of microquantities of Tm(III) ions on washed polyurethane foam (PUF) from a mixture of aqueous solution and ethanol containing PAN was examined. The maximum sorption of 3.18^. 10^-6M solution of Tm(III) ions was observed at pH 8 with 30-minute equilibration time. The optimum ratio of aqueous-ethanol phase for the sorption of Tm(III) ions was found to be 3:1 v/v, respectively. The sorption rate of metal ions on PUF is followed a first order kinetics and obeyed the equation for an intra particle diffusion process. The equilibrium concentration data of Tm(III) ions could be described satisfactorily by several adsorption isotherms. The Freundlich adsorption isotherm constants 1/nand K_Fare 0.66±0.02 and (5.7±0.3)^. 10^-3mol^. g^-1, respectively. The Langmuir isotherm constants for monolayer coverage (Q) and binding strength of sorption (b) are (2.5±0.7)^. 10^-5mol^. g^-1and (1.6±0.1)^. 10⁴l^. mol^-1, respectively. The sorption capacity derived from Dubinin-Radushkevich (D-R) isotherm is (1.7±0.2)^. 10^-4mol^. g^-1and the sorption free energy (E) is 9.8±0.2 kJ^. mol^-1indicating chemisorption phenomena. The thermodynamic parameters indicate that the sorption of Tm(III) ions onto PUF is endothermic, entropy driven and spontaneous in nature.     

Palladium(0)-catalyzed regioselective synthesis of alpha-dehydro-beta-amino esters from amines and allyl acetates: synthesis of a alpha-dehydro-beta-amino acid derived cyclic peptide as a constrained beta-turn mimic

Acetates derived from the adducts of the Baylis-Hillman reaction can be reacted in a regioselective manner with amines in the presence of palladium(0) catalyst to afford alpha-dehydro-beta-amino esters (2 and 3) in good yields. The regioselectivity of the reaction can be controlled by temperature and reaction medium leading to the synthesis of regioisomers 2 or 3. The alpha-dehydro-beta-amino acid 3 is a turn inducer, and the dipeptides 6 derived from it show the presence of an eight-membered intramolecular hydrogen bond. Also, cobalt(II) chloride catalyzes the cleavage of epoxy peptides with alpha-dehydro-beta-amino acid derivative 3b to afford the corresponding dipeptide derivatives 8, which exhibit an intramolecular hydrogen bond and thus mimic a beta-turn. This intramolecular hydrogen bonding preorganizes the corresponding diallylated peptide 8c for cyclization via ring-closing metathesis to afford the cyclic peptide 9 as a constrained mimic of a beta-turn.