High performance liquid chromatographic separation and UV determination of cobalt, copper iron and platinum in pharmaceutical preparations using bis(isovalerylacetone)ethylenediimine as complexing reagent

The reagent bis(isovalerylacetone)ethylenediimine(H₂IVA₂en) has been examined for HPLC separation and UV determination of cobalt, copper, iron and platinum using off-line precolumn derivatization and extraction in chloroform. The complexes of cobalt(II), cobalt(III), iron(II), iron(III) and the reagent have been subsequently separated on a Microsorb C-18 column. The complexes were eluted isocratically using ternary mixtures of methanol/water/acetonitrile. Detection was achieved by UV monitoring. Detection limits for Co(II), Co(III), Fe(II) and Fe(III) were 2.5–5.0 ng/injection, based on 0.5–1.0 g/ml with 5 l/injection. The concentration of cobalt(II) and cobalt(III) in aqueous solution have been determined. The presence of oxovanadium(IV), platinum(II), and nickel(II) did not affect the determinations. The HPLC method developed has been applied to the determination of cobalt, copper, iron and platinum in pharmaceutical preparations at the 30 g/g to 15 mg/g level and the obtained results were compared to those of atomic absorption spectrometry.     

Mathematical algorithms applied to the multi-linear regression functions for the multicomponent determination of pharmaceutical dosage form containing three-component mixtures

In the presence of closely overlapping spectra, the quantitative multiresolution of ternary mixtures of three active compounds paracetamol (PAR), caffeine (CAF) and acetylsalycilic acid (ASP) in tablets, without using pretreatment such as separation step and graphical procedure of spectra was accomplished by the multivariate spectral calibration models, tri-linear regression calibration (TLRC), multi-linear regression calibration (MLRC) and Cramer's rule solution (CRS) of three linear equation functions in the matrix form. In the first two models, TLRC and MLRC are based on the use of the linear regression functions at selected wavelength sets in the spectral region of 210-300 nm. In the case of CRS model, A1(1) (1%, 1 cm) were used to obtain three linear equation functions and this linear equation system was resolved by the Cramer's rule for the prediction of PAR, CAF and ASP in samples. In the TLRC and CRS models, the selection of the appropriate wavelength set was performed by the Kaiser's technique. The algorithms of these mathematical calibration models were briefly described. The validation of TLRC, MLRC and CRS models was carried out by analyzing various synthetic ternary mixtures and by using the standard addition technique. These three calibration approaches were applied to the analysis of the real pharmaceutical tablets containing PAR, CAF and ASP. The obtained results were statistically compared with each other by using experimental and statistical tests. In the comparison of TLRC and MLRC models to the classical approach, CRS technique, the successful assay results were observed for the quantitative multiresolution of ternary mixture of the subject active compounds.     

Enzyme inhibiting lignans from Vitex negundo

Two new lignans trivially named negundins A (1) and B (2), were isolated along with (+)-diasyringaresinol (3), (+)-lyoniresinol (4), vitrofolal E (5) and vitrofolal F (6), reported for the first time from this species. The structures of the new compounds were established through spectral studies. Compound 2 showed potent inhibitory activity against lipoxygenase enzyme, while 5 showed moderate activity against butyryl-cholinesterase.     

2,3,3′,6‐Tetra‐O‐acetyl‐4,1′,6′‐trichloro‐4,1′,4′,6′‐tetradeoxygalactosucrose

At 160 K, one of the Cl atoms in the furanoid moiety of 3‐O‐acetyl‐1,6‐di­chloro‐1,4,6‐tri­deoxy‐β‐d ‐fructo­furan­osyl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, C₂₀H₂₇­Cl₃O₁₁, is disordered over two orientations, which differ by a rotation of about 107° about the parent C—C bond. The conformation of the core of the mol­ecule is very similar to that of 3‐O‐acetyl‐1,4,6‐tri­chloro‐1,4,6‐tri­deoxy‐β‐d ‐tagato­furanos­yl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, particularly with regard to the conformation about the glycosidic linkage.     

Novel spiro-quinone formation from 3′-hydroxydiethylstilbestrol after oxidation with silver oxide

The human carcinogen diethylstilbestrol (DES) is metabolized into 3′-hydroxydiethylstilbestrol (3′-OH-DES) (1). Chemical oxidation of the catechol metabolites with silver oxide in CH₂Cl₂ affords a novel spiro-quinone (3) in quantitative yield. Protection of the phenolic OH group followed by oxidation gives 4″-OCH₃-DES-3′,4′-Q (5) in excellent yield.     

On finite conductor domains

An integral domain D is a FC domain if for all a, b in D, aDbD is finitely generated. Using a set of very general and useful lemmas, we show that an integrally closed FC domain is a Prüfer v-multiplication domain (PVMD). We use this result to improve some results which were originally proved for integrally closed FC domains (or for coherent domains) to results on PVMD's. Finally we provide examples of integrally closed integral domains which are not FC domains.     

Biological and phytochemical studies on Capparis decidua (Forssk) Edgew from Cholistan desert

Abstract

The present work deals with the biological and phytochemical studies on Capparis decidua (Forssk) Edgew from Cholistan desert of Pakistan. Aerial and floral parts of C. decidua were collected and dried under shade. Powdered materials of each part of C. decidua were extracted with methanol separately, followed by phytochemical studies. Hexane fraction of aerial parts of the C. decidua obtained after solvent-solvent extraction was purified through repeated column chromatography by increasing order of polarity. Four compounds were purified and identified as simiarenol (1), lupeol (2), taraxerol (3) and β-sitosterol (4). Simiarenol and lupeol were isolated for the first time from genus Capparis. The structures of these compounds were established by comparing the spectroscopic data (¹H NMR, ¹³C NMR, IR, UV & Mass spectrometry) reported in literature. The structure of 1 was further confirmed by XRD analysis. Anti-bacterial activities of crude methanolic extracts were determined against 13 bacterial strains (MIC 250-1000?μg/mL). α-Glucosidase and urease inhibitory activities of pure compounds were also determined. Compounds 1, 2 and 4 showed α-glucosidase inhibition with IC₅₀ at 96.12?±?0.12, 65.28?±?0.13 and 128.14?±?0.17?μM, respectively.     

Über eine mikroanalytische Schnellbestimmung von Acetyl- und C-Methylgruppen

Zusammenfassung Es wird eine Schnellmethode zur quantitativen Bestimmung der bei der Verseifung von Acetylverbindungen bzw. bei der Oxydation C-methylierter Substanzen gebildeten Essigsäure beschrieben. Unter Verwendung eines modifizierten Mikro-Kjeldahl-Apparates nach.Parnas-Wagner kann die Essigsäure quantitativ innerhalb von 10 Minuten mit Wasserdampf aus der verseiften bzw. oxydierten Probelösung abdestilliert werden. Sie wird dann im Destillat mit 0,01-n Natronlauge titriert. Die Abweichung der so erhaltenen Analysenwerte von den theoretisch berechneten beträgt maximal ±1%.

---

Summary A rapid method is described for the quantitative determination of the acetic acid formed by the saponification of acetyl compounds or in the oxidation of C-methylated substances. By using theParnas-Wagner modification of the microKjeldahl apparatus, the acetic acid can be quantitatively distilled off within 10 minutes with steam from the saponified or oxidized test solution. It is then titrated in the distillate with 0.1 N sodium hydroxide. The deviation of the results obtained from the theoretically calculated figures is ±1% at the maximum.

---

Résumé On décrit une méthode rapide pour le dosage de l'acide acétique formé par saponification des composés acétylés ou par oxydation des substances C-méthylées. Par emploi d'un appareil de micro-Kjeldahl modifié d'aprèsParnas et Wagner, l'acide acétique peut être éliminé quantitativement par distillation à l'aide de la vapeur d'eau en moins de 10 minutes à partir de la solution saponifiée ou oxydée. On titre alors l'acide dans le distillat avec de la lessive de soude 0,01 N; les écarts entre les valeurs calculées et mesurées se montent au maximum à ±1%.

---

---

Herrn Univ.-Prof. Dr.Adolf Franke zum 80. Geburtstag gewidmet!     

An advanced automation platform coupled with mass spectrometry for investigating in vitro human skin permeation of UV filters and excipients in sunscreen products

Rationale

Systemic absorption of UV-filtering chemicals following topical application of sunscreens may present a safety concern. The Food and Drug Administration (FDA) had recommended an in vitro skin permeation test (IVPT) to evaluate the potential of this safety risk for the evaluation of sunscreens prior to clinical studies. Therefore, a sensitive and robust bioanalytical method(s) were required for IVPT studies of different topical sunscreen products.

Methods

An analytical procedure to quantitate sunscreen UV-filtering components and excipients in IVPT samples including avobenzone, octocrylene, oxybenzone, ecamsule, methylparaben and propylparaben was developed employing a RapidFire 360 robotic sample delivery system coupled with a triple quadrupole mass spectrometer. The analytical procedure was developed and validated according to the requirements of the FDA Bioanalytical Method Validation Guidance for Industry (2018).

Results

The analytical method provided a turnaround time of 12 seconds per sample and was determined to be accurate, precise, specific, and linear over the corresponding analytical ranges. The validated method was successfully applied for two IVPT studies for evaluating the skin permeation potential of UV-filtering chemicals and assisting with the selection of the sunscreen products for the clinical study conducted by the FDA.

Conclusions

This work highlights the first analytical procedure that has applied a non-chromatographic-MS/MS automation platform to an in vitro biopharmaceutics study. The analytical platform simultaneously quantitated four UV filters and two excipients in complex media to evaluate their permeation in IVPT studies. The sample throughput and analytical performance of advanced automation platforms indicate their analytical procedure has the potential to significantly advance the efficiency of IVPT studies to evaluate permeation of a wide variety of UV chemical filters and excipients for topical OTC sunscreen products.

     

Methane activation and oxidation in sulfuric acid

The H/D exchange observed when methane is contacted with D(2)SO(4) at 270-330 degrees C shows that the alkane behaves as a sigma base and undergoes rapid and reversible protonation at this temperature. DFT studies of the hydrogen exchange between a monomer and a dimer of sulfuric acid and methane show that the transition states involved in the exchange are bifunctional, that is one hydrogen atom is transferred from a hydroxy group in sulfuric acid to methane, while one hydrogen atom is abstracted from methane by a non-hydroxy oxygen atom in sulfuric acid. All the transition states include a CH(5) moiety, which shows similarities to the methanium ion CH(5) (+). The calculated potential activation energy of the hydrogen exchange for the monomer is 174 kJ mol(-1), which is close to the experimental value (176 kJ mol(-1)). Solvation of the monomer and the transition state of the monomer with an extra sulfuric acid molecule, decrease the potential activation energy by 6 kJ mol(-1). The acid-base process is in competition, however, with an oxidative process involving methane and sulfuric acid which leads to CO(2), SO(2), and water, and thus to a decrease of acidity and loss of reactivity of the medium.