Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Aldehyde Intermediates in the Synthesis of Tacamine-Type Indole Alkaloids: Preparation of (±)-apotacamine

The synthesis of aldehyde intermediates suitable for the preparation of indole alkaloids of the tacamine ( 1 ) type is described. The four possible aldehydes 4–7 were prepared from methyl 5-ethylnicotinate ( 8 ) in a few simple steps using a base-catalyzed epimerization as the final step (Schemes 1 and 2). The key aldehyde 4 , which is an analogue of the important vincamine intermediate 3 (‘Oppolzer's aldehyde’), was finally converted into the indole alkaloid (±)-apotacamine ( 21 ).     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.     

A novel biosensor for specific determination of hydrogen peroxide: catalase enzyme electrode based on dissolved oxygen probe

A biosensor for the specific determination of hydrogen peroxide was developed using catalase (EC 1.11.1.6) in combination with a dissolved oxygen probe. Catalase was immobilized with gelatin by means of glutaraldehyde and fixed on a pretreated teflon membrane served as enzyme electrode. The electrode response was maximum when 50 mM phosphate buffer was used at pH 7.0 and at 35 degrees C. The biosensor response depends linearly on hydrogen peroxide concentration between 1.0x10(-5) and 3.0x10(-3) M with a response time of 30 s. The sensor is stable for >3 months so in this period >400 assays can be performed.     

Total synthesis of (+)-xyloketal D, a secondary metabolite from the mangrove fungus Xylaria sp.

(+)-Xyloketal D was prepared in a one-pot multistep domino reaction by heating optically active 5-hydroxy-4-methyl-3-methylenepentan-2-one (R) in toluene with 2,4-dihydroxyacetophenone. The absolute configuration of the natural product was confirmed by preparation of the starting enone from a lactone of established absolute configuration.     

The Color Reaction of Mercury(II) with the New Reagent 2-Methylthiophenyldiazoaminoazobenzene and Its Application

A new and very sensitive and selective chromogenic reagent, 2-methylthiophenyldiazoaminoa-zobenzene (MTDAA), was synthesized and studied in detail for the determination of trace mercury(II) in water samples. The method is based on the color reaction between MTDAA and mercury(II). It was found that mercury(II) reacts with MTDAA in Na₂B₄O₇-NaOH buffer solution (pH = 10.0) to form 1 : 2 red complexes; these show maximum absorption at 520 nm. Beer’s law is obeyed in 0–15 µg of mercury(II) in 25 mL of solution. The apparent molar absorptivity of the complex is 1.33 × 10⁵ L/(mol cm); its limit of quantification, limit of detection, and relative standard deviation are 0.75 ng/mL, 0.27 ng/mL, and 1.0%, respectively, giving better sensitivity. The influence of the reaction variables and the effect of interfering ions are reported; most of the metal ions in water samples can be tolerated in considerable amounts. Only a few ions can interfere with the determination of trace mercury(II), but these can be eliminated by prior extraction. The proposed method is sensitive, simple, and rapid. It has been applied to the determination of trace mercury(II) in water samples with satisfactory results.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 7, 2005, pp. 703–706.Original English Text Copyright © 2005 by Guo, Din, Tian, Liu, Chang, Meng.The text was submitted by the authors in English.     

Studies with enaminones: The reaction of enaminones with aminoheterocycles. A route to azolopyrimidines,azolopyridines and quinolines

The enaminones 1b,d,f react with 4‐phenyl‐3‐methyl‐5‐pyrazoleamine 3a to yield the pyrazole derivatives 4a‐c that cyclised readily on reflux in pyridine solution in presence of hydrochloric acid to yield the pyrazolo[1,5‐a]pyrimidines 5a‐c. Similarly 3(5)‐amino‐1H‐triazole (3b) reacted with 1b,d,f to yield the triazolo[1,5‐a]pyrimidines 5d‐f. In contrast attempted condensation of the 5‐tetrazoloamine (3c) with 1a,d,e resulted in its trimerisation and only triaroylbenzene 8a,d,e was isolated. The reaction of 1a,b,d with anthranilonitrile 9a and the reaction of 1a‐c with the 2‐aminocyclohexene thiophene‐3‐nitrile 10a afforded the cis enaminones 11a‐c and 12a‐c. Similarly, reaction of 1a‐c with the methylanthranilate 9b and reaction of 1b,e with ethyl 2‐aminocyclohexene thiophene‐3‐carboxylate 10b afforded the cis enaminones 11d‐f and 12d,e respectively. Attempted cyclization of 11a‐c into quinoline failed. Successful cyclization of 11d into the quinolinone 13 could be affected, on heating for five minutes in a domestic microwave oven at full power. The reaction of 1a‐c,f with piperidine afforded the trans enaminones 14a‐d. Similarly, trans 14e was formed from the reaction of 1b with morpholine. The coupling reaction of 1b with excess of benzene diazonium chloride afforded the formazane 16. The enaminone 2 reacted with heterocyclic amines to yield the pyridones 17,18.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Sorptive potential of sunflower stem for Cr(III) ions from aqueous solutions and its kinetic and thermodynamic profile

The sorptive potential of sunflower stem (180-300 μm) for Cr(III) ions has been investigated in detail. The maximum sorption (≥85%) of Cr(III) ions (70.2 μM) has been accomplished using 30 mg of high density sunflower stem in 10 min from 0.001 M nitric and 0.0001 M hydrochloric acid solutions. The accumulation of Cr(III) ions on the sorbent follows Dubinin-Radushkevich (D-R), Freundlich and Langmuir isotherms. The isotherm yields D-R saturation capacity X_m = 1.60 ± 0.23 mmol g⁻¹, β = −0.00654 ± 0.00017 kJ² mol⁻², mean free energy E = 8.74 ± 0.12 kJ mol⁻¹, Freundlich sorption capacity K_F = 0.24 ± 0.11 mol g⁻¹, 1/n = 0.90 ± 0.04 and of Langmuir constant K_L = 6800 ± 600 dm³ mol⁻¹ and C_m = 120 ± 18 μmol g⁻¹. The variation of sorption with temperature (283-323 K) gives ΔH = −23.3 ± 0.8 kJ mol⁻¹, ΔS = −64.0 ± 2.7 J mol⁻¹ K⁻¹ and ΔG_298k = −4.04 ± 0.09 kJ mol⁻¹. The negative enthalpy and free energy envisage exothermic and spontaneous nature of sorption, respectively. Bisulphate, Fe(III), molybdate, citrate, Fe(II), Y(III) suppress the sorption significantly. The selectivity studies indicate that Cr(III), Eu(III) and Tb(III) ions can be separated from Tc(VII) and I(I). Sunflower stem can be used for the preconcentration and removal of Cr(III) ions from aqueous medium. This cheaper and novel sorbent has potential applications in analytical and environmental chemistry, in water decontamination, industrial waste treatment and in pollution abatement. A possible mechanism of biosorption of Cr(III) ions onto the sunflower stem has been proposed.     

Synthesis and extraction properties of new chromogenic azo-calix[4]dibenzothiacrown ethers

Two novel chromogenic cone calix[4]dibenzothiacrown ethers 3 and 4 in which nitrophenylazo groups attached at the phenyl ring of dibenzothiacrown unit were described. The extraction properties of 3 and 4 toward different transition metal ions have been studied using conductometric technique and found to exhibit Cu²⁺ and Hg²⁺ selectivity with very high stability constants range from log K _assoc = 5.19 to log K _assoc = 8.72.