Regioselective Synthesis of 4‐(Arylsulfanyl)‐2‐hydroxyhomophthalates by [4+2] Cycloaddition of 3‐(Arylsulfanyl)‐1‐(trimethylsilyloxy)buta‐1,3‐dienes with Dimethyl Penta‐2,3‐dienedioate

The [4+2] cycloaddition of 3‐(arylsulfanyl)‐1‐(trimethylsilyloxy)buta‐1,3‐dienes with dimethyl penta‐2,3‐dienedioate provides a convenient and regioselective approach to a variety of 4‐(arylsulfanyl)‐2‐hydroxyhomophthalates.     

Nitric Oxide Conversion and Ozone Synthesis in a Shielded Sliding Discharge Reactor with Positive and Negative Streamers

Positive and negative streamer discharges in atmospheric pressure air were generated in a shielded sliding discharge reactor at operating voltages as low as 5 kV for a gap length of 1.6 cm. In this reactor, electrodes are placed on top of a dielectric layer and one of the electrodes, generally the one on ground potential, is connected to a conductive layer on the opposite side of the dielectric. The energy per pulse, at the same applied voltage, was more than a factor of seven higher than that of pulsed corona discharges, and more than a factor of two higher than that of sliding discharges without a shield. It is explained on the basis of enhanced electric fields, particularly at the plasma emitting electrode. Specific input energy required for 50 % removal from ~1,000 ppm initial NO could be reduced to ~18 eV/molecule when ozone in the exhaust of negative streamers was utilized. For sliding discharges and pulsed corona discharges this value was ~25 eV/molecule and it was 35 eV/molecule for positive shielded sliding discharges. Also, the ozone energy yield from dry air was up to ~130 g/kW h and highest for negative streamer discharges in shielded sliding discharge reactors. The high energy density in negative streamer discharges in the shielded discharge reactor at the relatively low applied voltages might not only allow expansion of basic studies on negative streamers, but also open the path to industrial applications, which have so far been focused on positive streamer discharges.     

Optical properties of a-Se90In10−x Snx chalcogenide thin films before and after gamma irradiation

Amorphous Se₉₀In_10?xSn_x (x=2, 4, 6, and 8) thin films of thickness 1000 Å were prepared on glass substrates by the thermal evaporation technique. Optical parameters of the films were investigated, in the wavelength range 400–700 nm, before and after irradiation by 4, 8, and 12 kGy doses of γ-ray. The optical absorption coefficient α for as-deposited and gamma irradiated films was calculated from the reflectance R and transmittance T measurements, which were recorded at room temperature. From the knowledge of α, at different wavelengths, the optical band gap E_g was calculated for all compositions of Se–In–Sn thin films before and after gamma irradiation. Results indicate that allowed indirect optical transition is predominated in as-deposited and irradiated films. Besides, it is found that the band gap decreases with increasing Sn concentration and this is attributed to the corresponding decrease in the average single bond energy of the films. The band gap, after irradiation at different doses of γ-ray, was found to decrease for all compositions of the studied films. This post-irradiation decrease in the band gap was interpreted in terms of a bond distribution model.     

Epitope Imprinting of Phospholipids by Oriented Assembly at the Oil/Water Interface for the Selective Recognition of Plasma Membranes

Phospholipids, as fundamental building blocks of the cell membrane, play important roles for molecule transportation, cell recognition, etc. However, due to the structural diversity and amphipathic nature, there are few methods for the specific recognition of lipids as compared to other biomolecules such as proteins and glycans. Herein, we developed a molecular imprinting strategy for controllable imprinting toward the polar head of phospholipid exposed on the surface of cellular membranes for recognition. Phosphatidylserine, as unique lipid on the outer membrane leaflet of exosome and also hallmark for cell apoptosis, was imprinted with the developed method. The phosphatidylserine imprinted materials showed high efficiency and specific targeting capability not only for apoptotic cell imaging but also for the isolation of exosomes. Collectively, the synthesized molecularly imprinted materials have great potential for selective plasma membrane recognition for targeted drug delivery and biomarker discovery.     

Characterization of Natural and Alkaline-Oxidized Proanthocyanidins in Plant Extracts by Ultrahigh-Resolution UHPLC-MS/MS

In this study, we analyzed the proanthocyanidin (PA) composition of 55 plant extracts before and after alkaline oxidation by ultrahigh-resolution UHPLC-MS/MS. We characterized the natural PA structures in detail and studied the sophisticated changes in the modified PA structures and the typical patterns and models of reactions within different PA classes due to the oxidation. The natural PAs were A- and B-type PCs, PDs and PC/PD mixtures. In addition, we detected galloylated PAs. B-type PCs in different plant extracts were rather stable and showed no or minor modification due to the alkaline oxidation. For some samples, we detected the intramolecular reactions of PCs producing A-type ether linkages. A-type PCs were also rather stable with no or minor modification, but in some plants, the formation of additional ether linkages was detected. PAs containing PD units were more reactive. After alkaline oxidation, these PAs or their oxidation products were no longer detected by MS even though a different type and/or delayed PA hump was still detected by UV at 280 nm. Galloylated PAs were rather stable under alkaline oxidation if they were PC-based, but we detected the intramolecular conversion from B-type to A-type. Galloylated PDs were more reactive and reacted similarly to nongalloylated PDs.     

Synthesis of silver nanoparticles using root extract of Duchesnea indica and assessment of its biological activities

Treatment of microbial infections and inflammatory conditions have many challenges in terms of efficacy and safety issues. Novel approaches such as nanoparticles based drug delivery system have shown promising results to solve some of these problems. The aim of this study was to exploit the efficacy of the synthesized silver nanoparticles. In this study, silver nanoparticles (AgNPs) were biosynthesized using root extract (aqueous) of Duchesnea indica. They were characterized using different techniques such as, ultraviolet–visible (UV–Vis) spectrophotometry, transmission and scanning electron microscopy (TEM and SEM), X-ray diffractometer (XRD), energy dispersive X-ray spectroscopy (EDX), fourier-transform infrared spectroscopy (FTIR) and zetasizer. The UV–Vis spectra gave a characteristic peak at 423 nm; XRD confirmed its crystalline structure; FTIR confirmed the involvement of phytochemicals in their capping and reduction; TEM images confirmed their spherical shape with average width of 20.49 nm and average area of 319.25 nm². Various biological activities were performed on these NPs, such as antimicrobial, anti-inflammatory, analgesic and muscle relaxant, which showed significant results as follow. Among bacterial strains, Salmonella typhi (MIC: 0.01 mg/ml) and Escherichia coli (MIC: 0.01 mg/ml), while among that of fungal Microsporum canis (MIC: 0.53 mg/ml) and Alternaria alternata (MIC: 0.51 mg/ml) were most susceptible. The AgNPs showed maximum anti-inflammatory activity (46.15 and 56.85%) at 20 mg/kg after 3 and 5 h of drug administration, comparable to that of standard. In-vivo model exhibited concentration dependent inhibition of both COX-2 and 5-LOX enzymes. Similarly, it exhibited maximum analgesic activity (54.24%) at 20 mg/kg dose after 60 min. of pain induction. Furthermore, they depicted maximum muscle relaxation (P < 0.01) after 60 and 90 min of drug administration. Above results suggest that these AgNPs can be studied further for the development of more effective and safe formulations.     

A simple, rapid and mild one pot synthesis of benzene ring acylated and demethylated analogues of harmine under solvent-free conditions

A simple, rapid, solvent-free, room temperature one pot synthesis of benzene ring acylated and demethylated analogues of harmine using acyl halides/acid anhydrides and AlCl(3) has been developed. Eight different acyl halides/acid anhydrides were used in the synthesis. The resulting mixture of products was separated by column chromatography to afford 10- and 12-monoacyl analogues, along with 10,12-diacyl-11-hydroxy products. In five cases the corresponding 10-acyl-11-hydroxy analogues were also obtained. Yields from the eight syntheses (29 products in total) were in the 6-34% range and all compounds were fully characterized.     

Synthesis of functionalized diaryl sulfides based on regioselective one-pot cyclizations of 1,3-bis(trimethylsilyloxy)-1,3-butadienes

Functionalized diaryl sulfides were prepared based on one-pot cyclizations of 1,3-bis(trimethylsilyloxy)-1,3-butadienes.     

Enzyme inhibiting lignans from Vitex negundo

Two new lignans trivially named negundins A (1) and B (2), were isolated along with (+)-diasyringaresinol (3), (+)-lyoniresinol (4), vitrofolal E (5) and vitrofolal F (6), reported for the first time from this species. The structures of the new compounds were established through spectral studies. Compound 2 showed potent inhibitory activity against lipoxygenase enzyme, while 5 showed moderate activity against butyryl-cholinesterase.     

New dimeric, trimeric and supramolecular organotin(IV) dithiocarboxylates: Synthesis, structural characterization and biocidal activities

Some new tri-, chlorodi- and diorganotin(IV) dithiocarboxylates (1–10) of 4-benzylpiperidine-1-carbodithioate ligand (L), with general formulae R₃SnL {R = n-C₄H₉ (1), C₆H₁₁ (2), CH₃ (3) and C₆H₅ (4)}, R₂SnClL {R = n-C₄H₉ (5), C₂H₅ (7), CH₃ (9)} and R₂SnL₂ {R = n-C₄H₉ (6), C₂H₅ (8), CH₃ (10)}, have been synthesized by the reaction of organotin(IV) chlorides with the ligand-salt in the appropriate molar ratio. Elemental analysis, Raman, IR, multinuclear NMR (¹H, ¹³C and ¹¹⁹Sn) and X-ray crystallographic studies have been undertaken to elucidate the structures of the complexes, both in solution and in solid state. Single-crystal X-ray diffraction study indicate trimeric, dimeric, supramolecular cyclic and supramolecular zig–zag chain structures for complexes 2, 4, 6 and 9, respectively. Square-pyramidal geometry is attributed to complex 9 on the basis of the τ value (0.4). A subsequent antimicrobial study indicates that the compounds are biologically active.