Effects of

Effects of cetyltrimethylammonium bromide (CTABr) micelles on second-order rate constants (k(n)(obs)) for nucleophilic reactions of amines (piperidine and n-butylamine) with ionized phenyl salicylate (PS(-)) reveal a nonlinear decrease with the increase in [D(n)] (where [D(n)] = [CTABr](T) - cmc) at a constant [NaBr] and 35 degrees C. The observed data, at a constant [NaBr], fit reasonably well to a pseudophase model of micelles, and such a data fit gives kinetic parameters such as CTABr micellar binding canstant (K(S)) of PS(-). The effect of [NaBr] upon K(S) is explained with the empirical relationship K(S) = K(S)(0)/(1 + psi[NaBr]), where psi is an empirical parameter.     

Changes produced in the electrical resistivity of ErH2 thin films when converted to ErH3 due to hydrogen treatment

The resistivity of thin films (80–200 Å) of ErH₂ increases sharply when heated for 2 h at 300 °C in vacuum in the presence of hydrogen gas at 10^–2 Torr. This confirms that the films, originally metallic conductor, have become converted to semiconducting ErH₃ which is in conformity with the structural studies. The negative values of TCR also indicate the semiconducting nature of the hydrogen treated films. Activation energies of the films have been evaluated.     

The level scheme of133Sb

Nuclear spectroscopy studies of ₅₁ ¹³³ Sb₈₂ have been performed at the recoil fission product separators JOSEF and LOHENGRIN. A tentative level scheme has been established for this nucleus with one proton in addition to the doubly closed shell core¹³²Sn. Two isomeric states with half-lives of 3 and 16 μs have been found at excitation energies of >4300 keV and 4526 keV, respectively. Lower limits of 15/2 are deduced for the spins of these levels. The h_11/2 proton state is suggested at 2792 keV in agreement with the systematics of the lighter Z=51 isotopes and the heavier N=82 isotones. Several states have been observed between 4300 and 4600 keV which are probably due to the coupling of the single proton to core-excited states which have energies between 4000 and 4800 keV.     

Unsteady incompressible flow of magnetized aluminium oxide and titanium oxide nanoparticles with blood base fluid

In this investigation, a mixed convective nanoparticles fluid flow over an inclined plate is deliberated. The effects of slip boundary wall and magnetic field are also considered. The dimensionless governing system for the considered problem is attained by implementing recent definitions of fractional derivatives (FD). The generalized solution is obtained through the Laplace Transformation Scheme (LTS) for the momentum and thermal expressions. To improve the novelty and to demonstrate some more physical perception of the stated research work, some remarkable special cases of velocity distribution through CF and AB-fractional derivative concept are addressed, whose daily life implication is well known in the existing literature. Moreover, to evaluate the physical interest of the stated problem, the outcomes of the obtained system graphical illustrations are made by utilizing MATHEMATICA. As a result, we concluded that the aluminium oxide $A{l}_2{O}_3$ nanoparticles show more decaying behavior as compared to titanium oxide $Ti{O}_2$ nanoparticles for temperature and velocity profile. Furthermore, both fields i.e., momentum and thermal distributions are increased with the help of rising estimations parameter. Current results report novel applications in enhancement of heat transfer, thermal engineering, chemical processes, engineering and electronics devices, solar systems, extrusion processes, fission reactions etc.     

Reduction of soluble colloidal MnO<Subscript>2</Subscript> by <Emphasis Type="SmallCaps">DL</Emphasis>-malic acid in the absence and presence of nonionic TritonX-100

Kinetics of oxidation of DL-malic acid by water soluble colloidal MnO₂ (prepared from potassium permanganate and sodium thiosulfate solutions) have been studied spectrophotometrically in the absence and presence of nonionic Triton X-100 surfactant. The reaction is autocatalytic and manganese(II) (reduction product of the colloidal MnO₂) may be the autocatalyst. The order of the reaction is first in colloidal [MnO₂] as well as in [malic acid] both in the absence and presence of the surfactant. The reaction has acid-dependent and acid-independent paths and, in the former case, the order is fractional in [H⁺]. The effect of externally added manganese(II) is complex. The results show that the rate constant increases as the manganese(II) concentration is increased. It is not possible to predict the exact dependence of the rate constants on manganese(II) concentration, which has a series of reactions with other reactants. In the presence of TX-100, the observed effect on k is catalytic up to a certain [TX-100]; thereafter, an inhibitory effect follows. The catalytic effect is explained in terms of the mathematical model proposed by Tuncay et al. (in Colloids Surf A Physicochem Eng Aspects 149:279 3). Activation parameters associated with the observed rate constants (k_obs/k) have also been evaluated and discussed.     

A sensitive and rapid liquid chromatography tandem mass spectrometry method for quantitative determination of 7-ethyl-10-hydroxycamptothecin (SN-38) in human plasma containing liposome-based SN-38 (LE-SN38)

7-Ethyl-10-hydroxycamptothecin (SN-38) is an active metabolite of Irinotecan (CPT-11), an anticancer pro-drug. To support clinical pharmacokinetic studies for liposome based formulation of SN-38 (LE-SN38) in cancer patients, a rapid, simple and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed and validated for the quantification of total SN-38 in human plasma. Sample preparation was carried out by one-step protein precipitation using cold acetonitrile with 0.5% acetic acid (v/v). Camptothecin was used as an internal standard (IS). Chromatographic separation of SN-38 and IS was achieved using a Synergi Hydro-RP column (C(18), 50 x 2 mm, 4 micro m), with a gradient elution of acetonitrile and 0.1% acetic acid. After ionization in electrospray source (positive ions), the acquisition was performed in the multiple reactions monitoring mode. Quantitation was accomplished using the precursor-->product ion combinations of m/z 393.1-->349.2 for SN-38 and 349.1-->305.1 for IS. The quantification limit of 0.05 ng/mL was achieved by using much lower volume (0.2 mL) of plasma and in the presence of LE-SN38. The method was validated over the concentration range of 0.05-400 ng/mL. Accuracy was within +/-12% of nominal at all concentration levels. Inter-day and intra-day precisions expressed as percentage coefficient of variation (%CVs) for quality control (QC) samples were less than 14 and 5%, respectively.     

Total synthesis of (+)-xyloketal D, a secondary metabolite from the mangrove fungus Xylaria sp.

(+)-Xyloketal D was prepared in a one-pot multistep domino reaction by heating optically active 5-hydroxy-4-methyl-3-methylenepentan-2-one (R) in toluene with 2,4-dihydroxyacetophenone. The absolute configuration of the natural product was confirmed by preparation of the starting enone from a lactone of established absolute configuration.     

Aggregation and dispersion characteristics of calcium oxalate monohydrate: effect of urinary species

In this research, screening and central composite experimental designs are used to determine the effect of various factors on the aggregation and dispersion characteristics of previously grown calcium oxalate monohydrate (COM) crystals in artificial urinary environments of controlled variables. The variables examined are pH and calcium, oxalate, pyrophosphate, citrate, and protein concentrations in ultrapure water and artificial urine. Optical density measurements, particle size analysis, optical microscopy, AFM force measurements, and protein adsorption have been used to assess the state of aggregation and dispersion of the COM crystals and to elucidate the mechanisms involved in such a complex system. The data indicate that our model protein, mucin, acts as a dispersant. This is attributed to steric hindrance resulting from the adsorbed mucoprotein. Oxalate, however, promotes aggregation. Interesting interactions between protein and oxalate along with protein and citrate are observed. Such interactions (synergistic or antagonistic) are found to depend on the concentrations of these species. Surface responses for these interactions are presented and discussed in this paper. In summary, solution, surface, and interface chemistries interact in a complex manner in the physiological environment to either inhibit or promote aggregation, and an understanding of such interactions may help determine and control the factors affecting kidney stone formation.     

Quantitative softness parameters and their application in elucidation of Structure of Bimetallic Tetrathiocyanate Complexes

〉₂M(NCS)₂M′(SCN)₂〈 and [ML₆][M′(SCN)₄], (M = Co(II) and Ni(II), M′ = Zn(II), Cd(II) and Hg(II) and L = aniline(ani), p-toluidine(tol), pyridine(py), nicotinamide(nia), 2,2′-bipyridine(bipy) and 4-aminopyridine (apy)) have been prepared and characterized. Their structure have been proposed on the basis of molar conductance, magnetic moment, group theoretical calculations, ligand field parameters, infrared and electronic spectral studies. The proposed structures have also been supported by quantitative values of softness ?\documentclass{article}\pagestyle{empty}\begin{document}$ {\rm E}_{\rm n}^{_ + ^ +},{\rm E}_{\rm m}^{_{\rm +}^{\rm +}} $\end{document}”?,. Total softness of M and M′ and their difference \documentclass{article}\pagestyle{empty}\begin{document}$ \Delta {\rm TE}_{\rm n}^{_ + ^ +} \left({{\rm M} - {\rm M}'} \right) $\end{document} have also been derived by the following equations and related to the structure of the complexes. .