Optimization and Validation of RP-LC/UV–VIS Detection Method for Simultaneous Determination of Fat-Soluble Anti-Oxidant Vitamins, all-trans-Retinol and α-Tocopherol in Human Serum: Effect of Experimental Parameters

A versatile isocratic reversed-phase liquid chromatographic/ultraviolet–visible detection method for simultaneous determination of all-trans-retinol and α-tocopherol in human serum was developed and validated after optimization of various chromatographic conditions and other experimental parameters. Analytes were separated on a Kromasil 100 RP₁₈ (150 × 4.6 mm, 5 μm) analytical column protected by a Perkin Elmer RP₁₈ (30 × 4.6 mm, 10 μm) guard cartridge. The mobile phase, methanol–water (96:04 v/v) was pumped at a flow rate of 2.2 mL min^?1 and the column eluents were monitored at the wavelength of 292 nm using retinyl acetate (1.0 μg mL^?1) as the internal standard for both analytes. Sample preparation was based on protein precipitation and stabilization with 2,6-bis(1,1-dimethylethyl)-4-methylphenol/ethanol and a two step extraction process using n-hexane followed by dichloromethane as extraction solvents. Sample size was kept 20 μL and separation of analytes was achieved in less than 7 min. The present method demonstrated acceptable values for specificity/selectivity, linearity within the expected concentration range, recovery, precision, sensitivity, stability of solutions, robustness, and system suitability specifications and tests. The method was used for monitoring all-trans-retinol and α-tocopherol concentrations in human serum samples and could also be applied to other sample matrices such as brain slices and cosmetic products if attention is paid to the extraction procedure.     

Kinetics of formation of barium tungstate in equimolar powder mixture of BaCO<Subscript>3</Subscript> and WO<Subscript>3</Subscript>

The formation of Barium monotungstate (BaWO₄) particles in equimolar powder mixtures of BaCO₃ and WO₃ was examined under isothermal and non-isothermal conditions upon heating in air at 25–1200 °C, using thermogravimetry. Concurrence of the observed mass loss (due to the release of CO₂) to the occurrence of the formation reaction was evidenced. Accordingly, the extent of reaction (x) was determined as a function of time (t) or temperature (T). The x–t and x–T data thus obtained were processed using well established mathematical apparatus and methods, in order to characterize nature of reaction rate-determining step, and derive isothermal and non-isothermal kinetic parameters. Moreover, the reaction mixture quenched at various temperatures (600–1,000 °C) in the reaction course was analyzed by various spectroscopic and microscopic techniques, for material characterization. The results obtained indicated that the reaction rate may be controlled by unidirectional diffusion of WO₃ species across the product layer (BaWO₄), which was implied to form on the barium carbonate particles. The isothermally determined activation energy (118–125 kJ/mol) was found to be more credible than that (245 kJ/mol) determined non-isothermally.     

Cetyltrimethylammonium bromide-coated magnetite nanoparticles as highly efficient adsorbent for rapid removal of reactive dyes from the textile companies’ wastewaters

The utilization of modified magnetite nanoparticles (Fe₃O₄ NPs) with a cationic surfactant (cetyltrimethylammonium bromide (CTAB)) as an efficient adsorbent was successfully carried out to remove reactive black 5 (RBBA), reactive red 198 (RRR) and reactive blue 21 (RTB) dyes from aqueous solutions. First, a reactor was designed to be simple, repeatable and efficient in its synthesis of Fe₃O₄ NPs via co-precipitation method. Then, an orthogonal array design (OAD), four factor-four level (4⁴) matrix was applied to assign affecting factors on removing of the dyes from aqueous solutions. The obtained results from ANOVA showed that the amount of CTAB and NaCl% significantly affect the adsorption of RBBA, RRR and RTB dyes. The sorption kinetics of the dyes were best described by a second-order kinetic model, suggesting chemisorptions mechanism. Also, dye adsorption equilibrium state data were fitted well to the Langmuir isotherm rather than Freundlich isotherm. Also, the maximum monolayer capacity, q_max, obtained from the Langmuir was 312.5, 163.9 and 556.2 mg g^-1 for RBBA, RRR and RTB, respectively. The obtained results in the present study indicated that the CTAB-coated Fe₃O₄ NPs can be an efficient adsorbent material for removal of reactive dyes form aqueous solutions.     

Enzyme-free impedimetric glucose sensor based on gold nanoparticles/polyaniline composite film

A non-enzymatic impedimetric glucose sensor was fabricated based on the adsorption of gold nanoparticles (GNPs) onto conductive polyaniline (PANI)-modified glassy carbon electrode (GCE). The modified electrode (GCE/PANI/GNPs) was characterized by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The determination of glucose concentration was based on the measurement of EIS with the mediation of electron transfer by ferricyanide ([Fe(CN)₆]^3?). The [Fe(CN)₆]^3? is reduced to ferrocyanide ([Fe(CN)₆]^4?), which in turn is oxidized at GCE/PANI/GNPs. An increase in the glucose concentration results in an increase in the diffusion current density of the [Fe(CN)₆]^4? oxidation, which corresponds to a decrease in the faradaic charge transfer resistance (R _ct). A wide linear concentration range from 0.3 to 10 mM with a lower detection limit of 0.1 mM for glucose was obtained. The proposed sensor shows high sensitivity, good reproducibility, and stability. In addition, the sensor exhibits no interference from common interfering substances such as ascorbic acid, acetaminophen, and uric acid.     

Effect of Temperature on Cd2+ Sorption by Mixed Oxides of Iron and Silicon

The current study focuses on the synthesis and sorption properties of two mixed oxides of iron and silicon prepared by physical mixing (M₁) and sequential precipitation methods (M₂). Both the mixed oxides were synthesized from equimolar ratios of Fe(OH)₃ and SiO₂ and characterized for surface area, EDX, XRD and PZC. The surface area, micropore volume and average pore width of the oxide M₁ were higher as compared to the oxide M₂. However, potentiometric titrations revealed that mixed oxide synthesized by this method had a very high capacity towards Cd²⁺ ions as compared to the mixed oxide M₁. Sorption of Cd²⁺ ions at pH 5 on mixed oxide, M₂ was found to increase with temperature in the range 288 to 318 K. Langmuir equation was found applicable to the sorption data with R²>0.99. Entropy (ΔS^?), enthalpy (ΔH^?) and free energy changes (ΔG^?) were calculated which revealed the process to be endothermic and spontaneous in nature.     

Efficient Palladium‐Assisted One‐Pot Deprotection of (Acetamidomethyl)Cysteine Following Native Chemical Ligation and/or Desulfurization To Expedite Chemical Protein Synthesis

The acetamidomethyl (Acm) moiety is a widely used cysteine protecting group for the chemical synthesis and semisynthesis of peptide and proteins. However, its removal is not straightforward and requires harsh reaction conditions and additional purification steps before and after the removal step, which extends the synthetic process and reduces the overall yield. To overcome these shortcomings, a method for rapid and efficient Acm removal using Pd^II complexes in aqueous medium is reported. We show, for the first time, the assembly of three peptide fragments in a one‐pot fashion by native chemical ligation where the Acm moiety was used to protect the N‐terminal Cys of the middle fragment. Importantly, an efficient synthesis of the ubiquitin‐like protein UBL‐5, which contains two native Cys residues, was accomplished through the one‐pot operation of three key steps, namely ligation, desulfurization, and Acm deprotection, highlighting the great utility of the new approach in protein synthesis.     

Validated TLC-densitometry method for the simultaneous analysis of pyrethroid insecticides in agricultural and domestic products

ABSTRACT: BACKGROUND: Pyrethroids are widely used for the control of pests and insects, as pyrethroids are believed to pose very little risk to human health and environment. However, exposure to the pyrethroids exceeding the label directions might adversely affect human health and environment. Hence a careful selection of environment friendly household product is required that must contain exactly the label claimed pyrethroids amount. RESULTS: A sensitive and robust TLC-densitometric method for simultaneous quantification of commonly used synthetic pyrethroids including esbiothrin, alpha-cypermethrin and cis/trans permethrin in agricultural and domestic products has been developed and validated. TLC aluminum plates, precoated with 0.2 mm thick layer of silica gel 60 F-254, were used for chromatographic process. Densitometric analysis of chromatoplates was carried out in absorbance mode at corresponding lamdamax of each pyrethroid. Equally valid common mobile phase for all pyrethroids consisted of hexane-dichloromethane-ethylacetate-formic acid (8:1.5:0.4:0.1 v/v/v/v) which provided sharp and symmetrical peaks of esbiothrin, alpha-cypermethrin, trans-permethrin and cis-permethrin, at Rf 0.31, 0.53, 0.6 and 0.65, respectively. Linear regression data for respective calibration curves showed a good linearity for all pyrethroids with r = 0.991-0.996. Limits of detection (LOD) and limits of quantification (LOQ) for all pyrethroids were found in the range of 1.6-2.8 and 4.9-8.5 ng/spot, respectively. CONCLUSIONS: The developed method is applicable for separating the mixture of pyrethroids and at the same time, it is also valid for separating their isomers. The method is reproducible, precise and accurate for the quantitative determination of pyrethroids in agricultural and domestic products.     

Synthesis,spectral characterization and biological studies of transition metal(II) complexes with triazole Schiff bases

New metal based triazoles (1–12) have been synthesized by the interaction of novel Schiff base ligands (L¹–L³) with the Co(II), Ni(II), Cu(II) and Zn(II) metal ions. The Schiff base ligands and their all metal(II) complexes have been thoroughly characterized using various physical, analytical and spectroscopic techniques. In vitro bacterial and fungal inhibition studies were carried out to examine the antibacterial and antifungal profile of the Schiff bases in comparison to their metal(II) complexes against two Gram‐positive, four Gram‐negative and six fungal strains. The bioactivity data showed the metal(II) complexes to have more potent antibacterial and antifungal activity than their uncomplexed parent Schiff bases against one or more bacterial and fungal species. Copyright © 2012 John Wiley & Sons, Ltd.     

Infra-Red Study of Tautomerism in Some Schiff Bases.

Infra-Red spectra of a series of substituted salicylaldehyde and 2-hydroxy-naphthaldehyde Schiff bases were used to investigate enol-keto tautomeric equilibrium. Two model compounds, namely, salicylidinaniline and naphthylidinequinolineamine Schiff bases were used to represent the enol and keto forms, respectively. From the IR spectra of the model compounds it was possible to assign the IR absorption for the C=O and the C=N groups in both the keto and the enol form. It was also possible to assign other absorptions which were either specific to the keto or the enol forms. Specific pattern were observed for all the studied compounds.