Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis,Modeling, and Application

Owing to the limited availability of suitable precursors for vapor phase deposition of rare-earth containing thin-film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris-guanidinate and tris-amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C-substituents on the N-C-N backbone (Me, NMe₂, NEt₂, where Me=methyl, Et=ethyl) and the N-substituents from symmetrical iso-propyl (iPr) to asymmetrical tertiary-butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)₃] 1 and [Yb(dpdmg)₃] 6 (dpdmg=N,N'-diisopropyl-2-dimethylamido-guanidinate) highlight a monomeric nature in the solid-state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O₂) and water (H₂O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)₃] 1 was used for proof-of-principle ALD depositions of CeO₂ thin films using water as co-reactant. The self-limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO₂ films formed on Si(100) substrates. This study confirms that moving towards nitrogen-coordinated rare-earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.     

Influence of Natural and Accelerated Weathering on the Mechanical Properties of Low-Density Polyethylene Films

Natural and accelerated weathering tests were performed to inspect the effect of antioxidants on low-density polyethylene (LDPE) films used as greenhouse covering materials. The LDPE pellets were extruded and blown into a film using a twin-screw extruder and film blowing machine, respectively. The film with 0.2 wt.% Alkanox-240 (AN-0.2) stabilizer showed the highest tensile strength (11 MPa) among all samples during 90 days of natural as well as accelerated weathering. The elastic modulus of the film with 0.5 wt.% of Good-rite (GR-0.5) increased after weathering from approximately 91.8 to 138.9 MPa, and showed the best performance. Morphological images of the neat LDPE film during weathering showed some cracks and grooves, while those of stabilized films showed fewer cracks. Moreover, the estimation of the rapidity of the accelerated method compared to the natural one was approximately nine times faster in Riyadh during the summer season (June–August). The present study suggests that the addition of antioxidants can improve the tensile strength, stability, and, hence, the effectiveness of these films. The best antioxidants were found to be 0.2 wt.% Alkanox and 0.5 wt.% Good-rite antioxidants.     

Mycotoxins: Simultaneous Detection of Zearalenone and Citrinin by Voltammetry on Edge Plane Pyrolytic Graphite Electrode

Mycotoxins are highly toxic compounds often found in the food. It is of paramount importance to have analytical technique for point‐of‐care on‐spot detection for authorised personnel to immediately take the action required. Electrochemistry offers the portability for miniaturized sensor of mycotoxins. Here we show that edge‐plane pyrolytic electrode offers excellent selectivity and sensitivity towards simultaneous detection of zearalenone and citrinin. This will have a great impact for point‐of‐care mycotoxin detection.     

New sensitive spectrophotometric method for the determination of clomipramine-HCl in pure form and pharmaceutical preparations

A simple, rapid and sensitive spectrophotometric method for the assay of clomipramine-HCl is described. It has been found that clomipramine-HCl reacts with ammonium molybdate in acetic medium to give blue color product exhibiting maximum absorbance at 712 nm. The reaction is selective for clomipramine-HCl with 1 μg/mL as visual limit of detection. It provides a basis for a sensitive spectrophotometric method for the determination of clomipramine-HCl. The method obeys Beer’s Law from 0.001 to 0.250 mg/mL. The standard deviation does not exceed 0.005 mg/mL. The method has been successfully applied to the determination of clomipramine-HCl in pure form and pharmaceutical preparations. The quantitative assessment of tolerable amounts of possible interferants was also studied. The results are reproduced within ±1% and are in good agreement with those obtained by the standard procedure.     

Ku-band EMI shielding effectiveness and dielectric properties of Polyaniline-Y2O3 composites

Electromagnetic interference (EMI) shielding has become a phenomenon of great concern and there is growing demand towards the synthesis of materials with better EMI shielding effectiveness (EMI SE). This work highlights the preparation of Polyaniline-Yttrium Oxide (PANI-Y₂O₃) composites for EMI shielding applications in the frequency range from 12.4 to 18 GHz (Ku-band). The structure and morphology of the composites were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). EMI SE, microwave absorption and reflection, dielectric properties of the composites are discussed in detail. All the computations were based on microwave scattering parameters measured by transmission line waveguide technique. The observed results show absorption dominant EMI shielding in these composites with EMI SE of ?19 to ?20 dB, which mainly depends on the dielectric loss of the composites. Through the results of our observations, we propose these composites to be potential materials for microwave absorption and EMI shielding applications.     

Scaling of Shielded Sliding Discharges for Environmental Applications

Shielded sliding discharges are nanosecond streamer discharges which develop along a dielectric between metal foil electrodes, with one of the foils extended over the entire rear of the dielectric layer. The electrode configuration not only allowed rearranging discharges in parallel due to the decoupling effect of the metal layer, but also to modify the electric field distribution in such a way that components normal to the surface are enhanced, leading to an increased energy density in the discharge plasma. By varying the electrode gap, the applied voltage, and the repetition rate, it is shown that by keeping the average electric field constant, the discharge voltage can be reduced from tens of kV to values on the order of a few kV, but only at the expense of a reduced energy density of the plasma. Varying the repetition rate from 20 to 500 Hz resulted in a slightly reduced energy per pulse, likely caused by residual charges on the dielectric surface. Measurements of the NO conversion to NO₂ and ozone synthesis in dry air showed that the conversion is only dependent on the energy density of the discharge plasma. Although reducing the pulse voltage from the tens of kV range to that of few kV, and possibly even lower, causes a reduction in energy density, this loss can be compensated for by increasing the electrode gap area. This and the possibility to form discharge arrays allows generating large volume discharge reactors for environmental applications, at modest pulsed voltages.     

Essential Role of the N- and C-terminals of Laccase from Pleurotus florida on the Laccase Activity and Stability

POXA1b is the most thermostable laccase isoenzyme from Pleurotus ostreatus. POXA1b is remarkably stable at alkaline pH (the t_1/2 at pH 10 was 30 days), and its C-terminal affects its catalytic and stability properties. We cloned POXA1c from P. florida, which showed 99 % identity with POXA1b. POXA1c was functionally expressed in Pichia pastoris. The functions of the N and C termini of POXA1c were investigated using site-directed mutagenesis. Compared with POXA1c, the N-terminal R5V site effectively increased the specific activities for 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and guaiacol by 2- and 3.5-fold, respectively. A C-terminal truncated mutant, POXA1c△13, also increased the specific activities for ABTS and guaiacol by 2.3- and 3.4-fold, respectively. A double mutant, POXA1cΔ13-R5V, combined the R5V and △13 effects. The specific activity of this double mutant for ABTS was 1,321 U/mg, which indicated a 4-fold increase compared with the wild type. The role of residue V5 on laccase catalytic properties was also observed for laccases from Trametes versicolor and Rigidoporus lignosus. The specific activities of the V5R of the laccases from T. versicolor and R. lignosus were half of that of the wild type. The pH and thermal stability analysis of POXA1c and its mutants showed that the enzymes were remarkably stable because they showed 63 % residual activity after incubation for 108 h at 30 °C over a pH range of 4.5 to 9.0. Similar results were observed for POXA1cΔ13-R5V. POXA1cΔ13-R5V can be widely used in industrial biotechnology because of its excellent catalytic properties.     

Metal–Sulfur Linkages Achieved by Organic Tethering of Ruthenium Nanocrystals for Enhanced Electrochemical Nitrogen Reduction

Inspired by the metal–sulfur (M-S) linkages in the nitrogenase enzyme, here we show a surface modification strategy to modulate the electronic structure and improve the N₂ availability on a catalytic surface, which suppresses the hydrogen evolution reaction (HER) and improves the rate of NH₃ production. Ruthenium nanocrystals anchored on reduced graphene oxide (Ru/rGO) are modified with different aliphatic thiols to achieve M-S linkages. A high faradaic efficiency (11 %) with an improved NH₃ yield (50 μg h⁻¹ mg⁻¹) is achieved at −0.1 V vs. RHE in acidic conditions by using dodecanethiol. DFT calculations reveal intermediate N₂ adsorption and desorption of the product is achieved by electronic structure modification along with the suppression of the HER by surface modification. The modified catalyst shows excellent stability and recyclability for NH₃ production, as confirmed by rigorous control experiments including ¹⁵N isotope labeling experiments.     

Synthesis,Structure and Elastic Properties of a New Hybrid Perovskite Material: [C6H14N2]KBr3

A new hybrid organic-inorganic perovskite(HOIP)material,[C6H14N2]KBr3,has been synthesized via hydrothermal method and fully characterized.[C6H14N2]KBr3 has a three-dimensional perovskite structure and crystalizes in a trigonal P3121 space group.The elastic properties of[C6H14N2]KBr3 were fully calculated via the density functional theory calculations,which reveal the elastic moduli(11.54~14.07 GPa),shear moduli(4.56~5.68 GPa),Poisson’s ratios(0.18~0.32),bulk modulus(8.51 GPa)and acoustic velocity(2.57~2.74 kms^-1).Additional nanoindentation experiments in the form of single-crystals confirmed the validity of our theoretical approach.[C6H14N2]KBr3 exhibits higher stiffness and thermal stability than the well-known photovoltaic CH3NH3PbI3,which makes it worthwhile for exploring optoelectronic properties.