New sensitive spectrophotometric method for the determination of clomipramine-HCl in pure form and pharmaceutical preparations

A simple, rapid and sensitive spectrophotometric method for the assay of clomipramine-HCl is described. It has been found that clomipramine-HCl reacts with ammonium molybdate in acetic medium to give blue color product exhibiting maximum absorbance at 712 nm. The reaction is selective for clomipramine-HCl with 1 μg/mL as visual limit of detection. It provides a basis for a sensitive spectrophotometric method for the determination of clomipramine-HCl. The method obeys Beer’s Law from 0.001 to 0.250 mg/mL. The standard deviation does not exceed 0.005 mg/mL. The method has been successfully applied to the determination of clomipramine-HCl in pure form and pharmaceutical preparations. The quantitative assessment of tolerable amounts of possible interferants was also studied. The results are reproduced within ±1% and are in good agreement with those obtained by the standard procedure.     

A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

In the present study, carbon-coated lithium iron phosphate (LiFePO₄/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO₄/C using X-ray, neutron diffraction and ⁷Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO₄/C cathode delivered capacities of 162 mA h g^-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO₄/C production.     

Ku-band EMI shielding effectiveness and dielectric properties of Polyaniline-Y2O3 composites

Electromagnetic interference (EMI) shielding has become a phenomenon of great concern and there is growing demand towards the synthesis of materials with better EMI shielding effectiveness (EMI SE). This work highlights the preparation of Polyaniline-Yttrium Oxide (PANI-Y₂O₃) composites for EMI shielding applications in the frequency range from 12.4 to 18 GHz (Ku-band). The structure and morphology of the composites were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). EMI SE, microwave absorption and reflection, dielectric properties of the composites are discussed in detail. All the computations were based on microwave scattering parameters measured by transmission line waveguide technique. The observed results show absorption dominant EMI shielding in these composites with EMI SE of ?19 to ?20 dB, which mainly depends on the dielectric loss of the composites. Through the results of our observations, we propose these composites to be potential materials for microwave absorption and EMI shielding applications.     

A Small‐Molecule FRET Reporter for the Real‐Time Visualization of Cell‐Surface Proteolytic Enzyme Functions

Real‐time imaging of cell‐surface‐associated proteolytic enzymes is critical to better understand their performances in both physiological and pathological processes. However, most current approaches are limited by their complexity and poor membrane‐anchoring properties. Herein, we have designed and synthesized a unique small‐molecule fluorescent probe, which combines the principles of passive exogenous membrane insertion and Förster resonance energy transfer (FRET) to image cell‐surface‐localized furin‐like convertase activities. The membrane‐associated furin‐like enzymatic cleavage of the peptide probe leads to an increased fluorescence intensity which was mainly localized on the plasma membrane of the furin‐expressed cells. This small‐molecule fluorescent probe may serve as a unique and reliable reporter for real‐time visualization of endogenous cell‐surfaceassociated proteolytic furin‐like enzyme functions in live cells and tissues using one‐photon and two‐photon microscopy.     

Scaling of Shielded Sliding Discharges for Environmental Applications

Shielded sliding discharges are nanosecond streamer discharges which develop along a dielectric between metal foil electrodes, with one of the foils extended over the entire rear of the dielectric layer. The electrode configuration not only allowed rearranging discharges in parallel due to the decoupling effect of the metal layer, but also to modify the electric field distribution in such a way that components normal to the surface are enhanced, leading to an increased energy density in the discharge plasma. By varying the electrode gap, the applied voltage, and the repetition rate, it is shown that by keeping the average electric field constant, the discharge voltage can be reduced from tens of kV to values on the order of a few kV, but only at the expense of a reduced energy density of the plasma. Varying the repetition rate from 20 to 500 Hz resulted in a slightly reduced energy per pulse, likely caused by residual charges on the dielectric surface. Measurements of the NO conversion to NO₂ and ozone synthesis in dry air showed that the conversion is only dependent on the energy density of the discharge plasma. Although reducing the pulse voltage from the tens of kV range to that of few kV, and possibly even lower, causes a reduction in energy density, this loss can be compensated for by increasing the electrode gap area. This and the possibility to form discharge arrays allows generating large volume discharge reactors for environmental applications, at modest pulsed voltages.     

Essential Role of the N- and C-terminals of Laccase from Pleurotus florida on the Laccase Activity and Stability

POXA1b is the most thermostable laccase isoenzyme from Pleurotus ostreatus. POXA1b is remarkably stable at alkaline pH (the t_1/2 at pH 10 was 30 days), and its C-terminal affects its catalytic and stability properties. We cloned POXA1c from P. florida, which showed 99 % identity with POXA1b. POXA1c was functionally expressed in Pichia pastoris. The functions of the N and C termini of POXA1c were investigated using site-directed mutagenesis. Compared with POXA1c, the N-terminal R5V site effectively increased the specific activities for 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and guaiacol by 2- and 3.5-fold, respectively. A C-terminal truncated mutant, POXA1c△13, also increased the specific activities for ABTS and guaiacol by 2.3- and 3.4-fold, respectively. A double mutant, POXA1cΔ13-R5V, combined the R5V and △13 effects. The specific activity of this double mutant for ABTS was 1,321 U/mg, which indicated a 4-fold increase compared with the wild type. The role of residue V5 on laccase catalytic properties was also observed for laccases from Trametes versicolor and Rigidoporus lignosus. The specific activities of the V5R of the laccases from T. versicolor and R. lignosus were half of that of the wild type. The pH and thermal stability analysis of POXA1c and its mutants showed that the enzymes were remarkably stable because they showed 63 % residual activity after incubation for 108 h at 30 °C over a pH range of 4.5 to 9.0. Similar results were observed for POXA1cΔ13-R5V. POXA1cΔ13-R5V can be widely used in industrial biotechnology because of its excellent catalytic properties.     

Metal–Sulfur Linkages Achieved by Organic Tethering of Ruthenium Nanocrystals for Enhanced Electrochemical Nitrogen Reduction

Inspired by the metal–sulfur (M-S) linkages in the nitrogenase enzyme, here we show a surface modification strategy to modulate the electronic structure and improve the N₂ availability on a catalytic surface, which suppresses the hydrogen evolution reaction (HER) and improves the rate of NH₃ production. Ruthenium nanocrystals anchored on reduced graphene oxide (Ru/rGO) are modified with different aliphatic thiols to achieve M-S linkages. A high faradaic efficiency (11 %) with an improved NH₃ yield (50 μg h⁻¹ mg⁻¹) is achieved at −0.1 V vs. RHE in acidic conditions by using dodecanethiol. DFT calculations reveal intermediate N₂ adsorption and desorption of the product is achieved by electronic structure modification along with the suppression of the HER by surface modification. The modified catalyst shows excellent stability and recyclability for NH₃ production, as confirmed by rigorous control experiments including ¹⁵N isotope labeling experiments.     

First-principle investigation of XSrH3 (X = K and Rb) perovskite-type hydrides for hydrogen storage

Hydrogen can be utilized as an energy source; therefore, hydrogen storage has received the most appealing examination interest in recent years. The investigations of hydrogen storage applications center fundamentally around the examination of hydrogen capacity abilities of recently presented compounds. XSrH₃ (X = K and Rb) compounds have been examined by density functional theory (DFT) calculations to uncover their different characteristics, as well as hydrogen capacity properties, for the first time. Studied compounds are optimized in the cubic phase, and optimized lattice constants are obtained as 4.77 and 4.99 Å for KSrH₃ and RbSrH₃, respectively. These hydrides have shown negative values of formation enthalpies as they are stable thermodynamically. XSrH₃ might be used in hydrogen storage applications because of high gravimetric hydrogen storage densities, which are 2.33 and 1.71 wt% for KSrH₃ and RbSrH₃, respectively. Moreover, electronic properties confirm the semiconductor nature of these compounds having indirect band gaps of values 1.41 and 1.23 eV for KSrH₃ and RbSrH₃, respectively. In addition, mechanical properties from elastic constants such as Young modulus and Pugh's ratio, also have been investigated, and these compounds were found to satisfy born stability conditions. Furthermore, Pugh's ratio and Cauchy pressure show that these hydrides have a brittle nature. Furthermore, thermodynamic properties such as entropy and Debye temperature have been examined using the quasiharmonic Debye model for different temperatures and pressures.     

Synthesis of heterocycles using nanomagnetic nickel catalysts

Abstract

Heterocyclic scaffolds are important components in the structure of many drugs and natural products. They are well-known compounds because of their broad spectrum of pharmaceutical and biological activities. In this paper, we provide an overview of the utilization of nickel complexes immobilized on magnetic nanoparticles as attractive and efficient catalytic systems for synthesis of heterocyclic molecules.     

Synthesis,Structure and Elastic Properties of a New Hybrid Perovskite Material: [C6H14N2]KBr3

A new hybrid organic-inorganic perovskite(HOIP)material,[C6H14N2]KBr3,has been synthesized via hydrothermal method and fully characterized.[C6H14N2]KBr3 has a three-dimensional perovskite structure and crystalizes in a trigonal P3121 space group.The elastic properties of[C6H14N2]KBr3 were fully calculated via the density functional theory calculations,which reveal the elastic moduli(11.54~14.07 GPa),shear moduli(4.56~5.68 GPa),Poisson’s ratios(0.18~0.32),bulk modulus(8.51 GPa)and acoustic velocity(2.57~2.74 kms^-1).Additional nanoindentation experiments in the form of single-crystals confirmed the validity of our theoretical approach.[C6H14N2]KBr3 exhibits higher stiffness and thermal stability than the well-known photovoltaic CH3NH3PbI3,which makes it worthwhile for exploring optoelectronic properties.