A photochemical method for patterning the immobilization of ligands and cells to self-assembled monolayers

This work describes a chemically well defined method for patterning ligands to self-assembled monolayers (SAMs) of alkanethiolates on gold. This method begins with monolayers presenting a nitroveratryloxycarbonyl (NVOC)-protected hydroquinone which is photochemically irradiated to reveal a hydroquinone group. The resulting hydroquinone is then oxidized to the corresponding benzoquinone, providing a site for the Diels-Alder mediated immobilization of ligands. The rate constant for the photochemical deprotection is 0.032 s(-1) (with an intensity of approximately 100 mW/cm(2) between 355 and 375 nm), corresponding to a half-life of 21 s. The hydroquinone is oxidized to the benzoquinone using either electrochemical or chemical oxidation and then functionalized by reaction with a cyclopentadiene-tagged ligand. Two methods for patterning the immobilization of ligands are described. In the first, the substrate is illuminated through a mask to generate a pattern of hydroquinone groups, which are elaborated with ligands. In the second method, an optical microscope fit with a programmable translational stage is used to write patterns of deprotection which are then again elaborated with ligands. This technique is characterized by the use of well-defined chemical reactions to control the regions and densities of ligand immobilization and will be important for a range of applications that require patterned ligands for biospecific interactions.     

Ultrasonic-assisted leaching of trace metals from sediments as a function of pH

The effects of ultrasonication on the leaching of trace metals form sediments as a function of pH have been investigated using atomic absorption spectrometry. Cu, Pb, Ni, Zn and Mn were leached from sediments by ultrasonic effect using phthalate buffers at pH values of 2.2-6.0. Parameters influencing leaching, such as leaching time, solution matrix, wet or dry sample and final pH were evaluated. Results from ultrasonic leaching experiments were comparable to those of conventional procedure. In addition, this ultrasonic-assisted leaching method reduces the time required for conventional method approximately from 12 h to 25 min. Depending on the metal and sample type, metal removal increased linearly or exponentially with decreasing pH. The accuracy of the method was tested by comparing obtained results with this of conventional method. The average relative standard deviation (R.S.D.) of ultrasonic-assisted leaching method (ULM) varied between 1.71 and 3.00% for N = 36, depending on the analyte. This technique shows promise for studying chemical and biological availability and uptake/release processes for metals in sediment and soil as a function of pH.     

9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans

Reaction between some naphtho[2,1-b]pyrans and 1,1-diphenylethene affords 9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans.     

Labelling of castor oil for myocardial study

The labelling of castor oil, hydrolyzed castor oil and oleic acid by iodine monochloride and chloramine-T has been investigated. The effect of iodinating agent and concentration of castor oil on labelling yield has been studied. A comparative pharmacological study with analogous aliphatic fatty acids was caried out. Castor oil labelled with iodine monochloride concentrates in heart and liver in good proportion, better than other natural fatty acids and nearly equal to analogous fatty acids. Infrared study revealed that the OH group in ricinoleic acid may protect the¹²⁵I added across the double bond with minor changes in biochemical properties and better extraction by the muscle of the heart.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Total synthesis of (+)-xyloketal D, a secondary metabolite from the mangrove fungus Xylaria sp.

(+)-Xyloketal D was prepared in a one-pot multistep domino reaction by heating optically active 5-hydroxy-4-methyl-3-methylenepentan-2-one (R) in toluene with 2,4-dihydroxyacetophenone. The absolute configuration of the natural product was confirmed by preparation of the starting enone from a lactone of established absolute configuration.     

Concanavalin a immobilized affinity adsorbents for reversible use in yeast invertase adsorption

Concanavalin A (Con A) immobilized poly(2-hydroxyethyl methacrylate) (PHEMA) beads were investigated for specific adsorption of yeast invertase from aqueous solutions. PHEMA beads were prepared by a suspension polymerization technique with an average size of 150-200 microm, and activated by epichlorohydrin. Con A was then immobilized by covalent binding onto these beads. The maximum Con A immobilization was found to be 10 mg/g. The invertase-loading capability of the PHEMA/Con A beads was 107 mg/g. The maximum invertase adsorption capacity on the PHEMA/Con A adsorbents was observed at pH 5.0. The values of the Michaelis constant K(m) of invertase were significantly larger upon adsorption, indicating decreased affinity by the enzyme for its substrate, whereas V(max) was smaller for the adsorbed invertase. Adsorption improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with adsorption. The adsorbed enzyme activity was found to be quite stable in repeated experiments. Storage stability of adsorbed invertase.     

Reaction of Pyrimidinonethione Derivatives: Synthesis of N‐Methyl‐2‐Hydrizinopyrimidine‐4‐One,Thiazolo[3,4‐b] N‐Methylpyrimidinone; 2‐(1‐Pyrazolonyl) N‐Methylpyrimidine‐4‐one and 2‐Hydrazino‐N‐Methyl Pyrimidine‐4‐One Derivatives

6‐Aryl‐5‐cyano‐4‐pyrimidinone‐2‐thion derivatives 1a‐c reacted with methyl iodide (1:2) to give the corresponding 2‐S,N‐dimethyl pyrimidine‐4‐one derivatives 2a‐c . Compounds 2a‐c were in turn, reacted with hydrazine hydrate to give the sulfur free reaction products 3a‐c . These reaction products were taken as the starting materials for the synthesis of several new heterocyclic derivatives. Reaction of 3a‐c with acetic anhydride and formic acid gave pyrimido triazines 4a‐c and 7a‐c , respectively. Their reactions with active methylene containing reagents gave the corresponding 2‐(1‐pyrazonyl)‐N‐methyl pyrimidine derivatives 9a‐c and 10a‐c , respectively. Their reactions with aromatic aldehydes afforded the corresponding 2‐hydrazono pyrimidine derivatives 11a‐c . The structure of these reactions products were established based on both elemental analysis and spectral data studies.     

Synthesis and Reactions of Some New Heterocyclic Compounds Containing Cycloalka[e]thieno[2,3‐b]pyridine Moiety

Hydrolysis of ethyl 3-amino-4-aryl-cycloalka[e]thieno[2,3-b]pyridine-2-carboxylates ( 3a-d) gave the corresponding o-aminocarboxylic acids 4a-d . Heating the latter compounds ( 4a-d) with acetic anhydride furnished the oxazinone derivatives 5a-d which, in turn, underwent recyclization reaction to give the corresponding pyrimidinones 6a-d upon treatment with ammonium acetate in acetic acid. Reaction of 3-amino-4-aryl-cycloalka[e]thieno[2,3-b]pyridine-2-carboxamides ( 3f,h ) with triethyl orthoformate gave pyrimidinone derivatives 7a,b . Reaction of 3-amino-4-phenyl-cycloalka[e]thieno[2,3-b]pyridine-2-carboxamides 3e,h with aromatic aldehydes furnished tetrahydropyridothienopyrimidinones 8a-d . Chlorination of 7a,b and 6a-d by using phosphorous oxychloride produced 4-chlorocycloalka[5′,6′]pyrido[3′,2′:4,5]thieno[3,2-d]pyrimidine derivatives 9a-f which were used as key intermediates in the synthesis of several new cycloalkapyrido-thienopyrimidines 10a-f ˜ 14a-f . Moreover, some cycloalkapyridothienotriazinones 15a,b-17a,b were synthesized.