A model for surfactant distribution in latex coatings

The presence of surfactants in dried latex films can adversely affect the adhesive, water-resistant, and gloss properties, so investigating the surfactant distribution in latex coatings is of prime industrial relevance. Here we present a model that predicts the distribution of surfactant in a latex coating during the solvent evaporation stage. The conservation equation for surfactant during solvent evaporation is solved in the limit of infinite particle Peclet numbers, a dimensionless quantity giving the measure of relative magnitudes of evaporative to diffusive fluxes. A parametric analysis using the model reveals that the surfactant adsorption isotherm is the determining physical parameter. The model always predicts surfactant excesses at the top surface and either excess or depletion at the bottom surface depending on the isotherm. Uniform distributions are predicted for low surfactant Peclet numbers. Attenuated total reflection Fourier transform infrared spectroscopic probes on film surfaces conform to the behavior predicted by the model.     

A new sphingolipid from the gorgonian Junceella juncea of the Indian Ocean

A new sphingolipid, (2S,3R,4E)-1,3-dihydroxy-2-[(nonadecanoyl) amino]-octadec-4-ene (1) along with ubiquitous batyl alcohol is isolated from the gorgonian, Junceella juncea Pallas (Gorgonaceae) of the Indian Ocean. The structure of 1 is determined on the basis of 1H- and 13C-NMR, COSY, FABMS, and GC-EIMS experiments.     

Spectrophotometric determination of cobalt(II) in the presence of large amounts of iron with salicylaldehyde thiosemicarbazone

Cobalt(II) reacts instantaneously with the reagent at pH 5.0. The yellow complex has a molar absorptivity of 1.1 × 10⁴ 1 mol^?1 cm^?1. The method is applied to the determination of cobalt in steels after removal of iron with phosphate.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.     

Aqueous polymerization of acrylonitrile by ascorbic acid–peroxodisulfate redox system

The polymerization of acrylonitrile initiated by an ascorbic acid–peroxodisulfate redox system was studied in an aqueous solution at 35°C in the presence of air. Molecular oxygen was found to have no effect on the polymerization reaction. An increase in ionic strength slightly increased the rate. The overall rate of polymerization, R_p, showed a square dependence on [monomer] and a half-order dependence on [peroxodisulfate]. A first-order dependence on [ascorbic acid] at low concentrations (<3.0 × 10^?3 mol L^?1) followed by a decrease in R_p at higher concentrations of ascorbic acid (>3.0 × 10^?3 mol L^?1) was also noted. R_p remained unchanged up to 40°C and showed a decline thereafter. Addition of catalytic amounts of cupric ions decreased the rate whereas ferric ions were found to increase the rate. Added sulfuric acid in the range (6.0?50.0) × 10^?5 mol L^?1 decreased the R_p.     

Synthesis and antimicrobial activity of N-(substituted)-N'-(2,3-dihydro-2-oxido-5-benzoyl-1H-1,3,2-benzodiazaphosphol-2-yl) ureas

N-(substituted)-N'-(2,3-dihydro-5-benzoyl-2-oxido-1H-1,3,2-benzodiazaphosphol-2-yl) ureas were synthesized by reacting 3,4-diaminobenzophenone (4) with different chlorides of carbamidophosphoric acids (3) in the presence of triethylamine at 40-45 degrees C. Their 1H-, 13C- and 31P-NMR spectral data are discussed. The title compounds were screened for antifungal and antibacterial activity against the fungi Aspergillus niger and Fusarium solani and bacteria Escherichia coli and Staphylococcus aureus. These compounds showed higher antibacterial activity when compared with antifungal activity.     

Solvent-adaptable silver nanoparticles

A simple and efficient way of obtaining silver nanoparticles that are dispersible both in organic and in aqueous solvents using a single capping agent is described. The silver nanoparticles are initially prepared in water in the presence of aerosol OT [sodium bis(2-ethylhexyl)-sulfosuccinate, AOT]. Thereafter, transfer of the AOT-capped silver nanoparticles to an organic phase is induced by the addition of a small amount of orthophosphoric acid during shaking of the biphasic mixture. The AOT-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder. The hydrophobic nanoparticles thus prepared are stable and are readily resuspended in a variety of other polar (including water) and nonpolar solvents without further surface treatment. The amphiphatic nature of the silver surface is brought about by a small orientational change in the AOT monolayer on the silver surface in response to the polarity of the solvent.     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Synthesis of Monosaccharide‐Derived Spirocyclic Cyclopropylamines and Their Evaluation as Glycosidase Inhibitors

The glucose‐, mannose‐, and galactose‐derived spirocyclic cyclopropylammonium chlorides 1a – 1d, 2a – 2d and 3a – 3d were prepared as potential glycosidase inhibitors. Cyclopropanation of the diazirine 5 with ethyl acrylate led in 71% yield to a 4 : 5 : 1 : 20 mixture of the ethyl cyclopropanecarboxylates 7a – 7d , while the Cu‐catalysed cycloaddition of ethyl diazoacetate to the exo‐glycal 6 afforded 7a – 7d (6 : 2 : 5 : 3) in 93–98% yield (Scheme 1). Saponification, Curtius degradation, and subsequent addition of BnOH or t‐BuOH led in 60–80% overall yield to the Z‐ or Boc‐carbamates 11a – 11d and 12a – 12d , respectively. Hydrogenolysis of 11a – 11d afforded 1a – 1d , while 12a – 12d was debenzylated to 13a – 13d prior to acidic cleavage of the N‐Boc group. The manno‐ and galacto‐isomers 2a – 2d and 3a – 3d , respectively, were similarly obtained in comparable yields (Schemes 2 and 4). Also prepared were the differentially protected manno‐configured esters 24a – 24d ; they are intermediates for the synthesis of analogous N‐acetylglucosamine‐derived cyclopropanes (Scheme 3). The cyclopropylammonium chlorides 1a – 1d, 2a – 2d and 3a – 3d are very weak inhibitors of several glycosidases (Tables 1 and 2). Traces of Pd compounds, however, generated upon catalytic debenzylation, proved to be strong inhibitors. PdCl is, indeed, a reversible, micromolar inhibitor for the β‐glucosidases from C. saccharolyticum and sweet almonds (non‐competitive), the β‐galactosidases from bovine liver and from E. coli (both non‐competitive), the α‐galactosidase from Aspergillus niger (competitive), and an irreversible inhibitor of the α‐glucosidase from yeast and the α‐galactosidase from coffee beans. The cyclopropylamines derived from 1a – 1d or 3a – 3d significantly enhance the inhibition of the β‐glucosidase from C. saccharolyticum by PdCl , lowering the K_i value from 40 μM (PdCl ) to 0.5 μM for a 1 : 1 mixture of PdCl and 1d . A similar effect is shown by cyclopropylamine, but not by several other amines.     

Spectrophotometric methods for the determination of omeprazole in bulk form and pharmaceutical formulations

Four simple and sensitive methods for the assay of omeprazole (OMZ) were developed. These methods are based on the formation of colored species by treating OMZ with 3-methyl-2-benzothiazolinone hydrazone (MBTH) following oxidation with ferric chloride (method A) or m-aminophenol following oxidation with chloramine-T (CAT) (method B) or Folin-Ciocalteau reagent (FC) (method D), or by oxidizing OMZ with excess N-bromosuccinimide (NBS) and determining the consumed NBS with a decrease in color intensity of Celestine blue (CB) (method C). All variables have been optimized. Regression analysis of Beer's plots showed good correlation in the concentration range of 1.0-10, 2.0-32, 0.4-2.4 and 0.8-10 mug ml(-1) for methods A, B, C and D, respectively. No interference was observed for formulation additives and the validity of each method was tested by analysing capsules containing OMZ. Recoveries were 98.7-100.1%.