Preparation and microwave absorption properties of electroless Co-Ni-P coated strontium ferrite powder

A new type of Co-Ni-P coated strontium ferrite nanocomposite was prepared with electroless plating enhanced by ultrasonic wave at room temperature. The plating process was studied carefully. The morphology, crystal structure and microwave absorption properties of the Co-Ni-P coated powder were studied with field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), energy dispersive analysis of X-rays (EDX) and vector network analyzer. The results show that the strontium ferrite powder was successfully coated with Co-Ni-P alloy and possesses excellent microwave absorption properties. The maximum microwave loss of the composite powder reaches −44.12 dB. The bandwidth with the loss above −10 dB exceeds 13.8 GHz.     

铸膜液溶剂体系的物理参数与BCA不对称膜的透气性

铸膜液的溶剂体系（溶剂和非溶剂）对不对称膜形态的形成有重要作用。为了探索溶剂和透气性间的关系，本文考虑到了制备ＢＣＡ梯度密度不对称膜的各种溶剂的一系列物理参数，得到了一些定性结果，并指出了更全面、明确、解释两者关系的研究方向。     

Polynomial Stability to Three-Dimensional Magnetoelastic Waves

In this work we show that the energy associated to the linear three-dimensional magneto-elastic system decays polynomially to zero as time goes to infinity, provided the initial data is smooth enough.     

A new technique for obtaining the activation energy distribution of a relaxing system

This paper describes a robust and fast fitting procedure applicable for relaxing processes that cannot be understood as a discrete sum of single processes but require an activation energy distribution. The method is based on a set of closed-form expressions that allow the computation of the relaxation parameters directly from the isochronal curves obtained experimentally. The usefulness of this method is checked by analyzing the isochronal curves given by a theoretical energy distribution and the magnetic disaccommodation spectra observed in yttrium iron garnet (YIG) samples. PACS 02.60.Ed; 75.60.Lr; 75.50.Gg     

镧掺杂水滑石材料的热分解过程研究

采用共沉淀法制备了系列La掺杂改性的含Cu类水滑石,高温焙烧得到其衍生混合氧化物材料,并用XRD,TG-DSC,FT-IR等对材料进行表征.结果表明,前驱物XRD图谱呈典型的水滑石衍射特征且颗粒结晶良好;经800℃焙烧后,掺杂La2O3含量为5.1%的样品仅有Mg1-xFexO晶相出现,说明La的掺杂提高了材料的高温稳定性,混合氧化物中的Cu离子呈高分散状态.     

用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。     

聚4—氨基联苯溶液的性质

本文报导了聚4-氨基联苯的电化学合成,测定了它的ESR、IR及紫外可见光谱。聚合物在THF、DMF和DMSO中能全部溶解。界面移动法测得聚4-氨基联苯的DMF饱和溶液中正离子的迁移率为1.48×10~(-8)m~2·S~(-1)·V~(-1)。     

Singlewall carbon nanotubes covered with polystyrene nanoparticles by in‐situ miniemulsion polymerization

This work is to make carbon nanotubes dispersible in both water and organic solvents without oxidation and cutting nanotube threads. Polystyrene‐singlewall carbon nanotube (PS‐SWNT) composites were prepared with three different methods: miniemulsion polymerization, conventional emulsion polymerization, and mixing SWNT with PS latex. The two factors, crosslinking and surface coverage of PS are important factors for the mechanical and electrical properties, including dispersion states of SWNT in various solvents. The PS‐SWNT composite prepared via a conventional emulsion polymerization showed SWNT bundles entirely covered with PS, whereas the PS‐SWNT composite prepared via a miniemulsion polymerization showed SWNT partially covered with crosslinked PS nanoparticles. The method of mixing SWNTs with PS latex did not show the well dispersed state of carbon nanotubes because PS was not crosslinked and was dissolved in a solvent, and nanotubes separated from PS precipitated. So the PS nanoparticle‐SWNT composite had lower electrical resistance, and higher mechanical strength than the other composites made by the latter two methods. As the amount of SWNT increases, the bare surface area of SWNT increases and the electrical conductivity increases in the composite made by the miniemulsion polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 573–584, 2006