基于智能数据采集器的研究与实现

针对目前各行业数字化、智能化产品应用日趋广泛,数据的获取、传输、分析、应用尤为重要,如何避免采集设备接口单一、功能固定、实用性差等缺点,提出采用ARM嵌入式工控模块M9080-N20为基础,采用VK3266串口芯片扩展UART串行接口,提出基于73K222AU调制解调器、HR219307变压器实现采集器二线模拟通信,并支持以太网、CAN总线和UART串行通信,可以有效解决数据远程采集、传输和控制,适用于特殊环境设备故障检测、诊断和抢修。实验结果证明,智能数据采集器不仅具有多种型号设备故障诊断功能;还能实现野外快速通信组网,不同类型设备数据远程采集、传输、分析和控制功能,在军民融合产品上具有广阔的应用前景和实用价值。     

小型轻便式流速仪检定系统设计

为满足FP系列流速仪的计量检定需求,提出了一种小型便携式流速仪检定系统的设计方案。根据匀速运动时间等约束条件确定了环形水槽的几何参数。采用FPGA和上位机作为数据处理和控制核心,实现了对伺服电机转速的精确控制。设计了光电编码器和无线摄像机与上位机之间的通信方式,实现了检定装置标准流速值和被检仪器示值的数据读取。对测试数据的处理方法和测控软件的结构框架进行了分析。同时,对实验装置的测量误差进行了分析。结果表明,标准流速值的扩展不确定度为1.28×10-3m/s,检定装置符合量值传递要求,可作为FP系列流速仪计量检定的标准装置。     

多种通信手段在遇险救生体系中的应用研究

我国海域辽阔,各类船只的水上航行和作业安全密切关系到生命和财产的安全,需要可靠保障。由于海上险情发生的随机性和突发性,岸上险情监视力量必须全时、全天候地开设险情通信通道,接收海上遇险对象的遇险呼救信号并及时对遇险信息进行处理。因此,岸基必须建设遇险救生信息系统并规定必要的信息传输流程,保障险情报知通信的顺利完成。文章简要分析了目前海上救生的通信现状,对常用通信手段进行了分析与介绍,并提出了一种整合各通信手段的设计方法,实现了多种通信手段的综合使用以及统一调度,大幅提升险情信息的传输和处理效率,提高险情信息的保密性,为救援工作提供了精确可靠的问责手段。     

An asymmetric imidazole derivative as potential fluorescent chemosensor for Fe in aqueous solution

A novel conjugated molecule, L, based on 2,4,5-triphenylimidazole and 6-phenyl-2,2′-bipyridine (HC^∧N^∧N) was synthesized in two steps. The molecule can recognize Fe³⁺ in aqueous solution (THF/H₂O, 1/1, v/v) by the appearance of new emission bands at 416 and 442 nm, which can be attributed to the emission of the newly formed L-Fe³⁺ complex. The binding constant of the complex was calculated to be (6.6±0.39)×10³ M⁻¹, and its formation was also confirmed by the appearance of isosbestic points at 312 and 381 nm in the UV-visible spectral titration experiment. While other transition and rare-earth metal ions, such as Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Eu³⁺ and Nd³⁺, can only cause some decrease of L's fluorescence, alkali and alkaline earth metal ions, such as Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺, almost have no effect on L's fluorescence. The fluorescence of L can be recovered by the addition of EDTA to the L-Fe³⁺ system just due to EDTA's stronger chelating ability than that of L.     

Microwave-assisted synthesis of flower-like and leaf-like CuO nanostructures via room-temperature ionic liquids

Flower-like and leaf-like cupric oxide (CuO) single-crystal nanostructures have been successfully synthesized using ionic liquid 1-octyl-3-methylimidazolium trifluoroacetate ([Omim]TA) under the microwave-assisted approach. By controlling the concentration of [Omim]TA and reaction temperature, shape transformation of CuO nanostructures could be achieved in a short period of time. The results indicate that ionic liquid [Omim]TA plays an important role in the formation of different morphologies of CuO crystals. The crystal structure and morphology of products were characterized by X-ray powder diffraction (XRD), infrared spectrum (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and selected-area electron diffraction (SAED). A possible mechanism for CuO nanostructure was proposed. In addition, UV-vis spectroscopy was employed to estimate the band gap energies of CuO crystals.     

Coupling coefficients evaluation of a directional coupler using gain guided and index antiguided fibers

In this paper, we have investigated the mutual and self coupling characteristics of directional couplers using two individual gain guided and index antiguided fibers, which can deliver robust single mode operation with large mode area, respectively owing to the combined adequately large gain coefficients in the core; Some interesting and distinguishing properties from conventional index guided fiber couplers are obtained that: The variations of coupling coefficients are complex-valued and spatially damping oscillated, but not exponential-like decreasing as conventional index guided couplers.     

Anisotropic partial differential equation noise-reduction algorithm based on fringe feature for ESPI

Noise reduction is one of the most exciting problems in electronic speckle pattern interferometry. We present a new anisotropic partial differential equation noise-reduction algorithm based on fringe orientation for interferometric fringe patterns. The proposed equation performs diffusion along the two directions of fringe gradient and isophote line, which are extracted accurately according to fringe feature. By restriction of diffusion in the gradient direction of fringe patterns, this method can provide optimal results in denoising but does not destroy fringe edges. The experimental results show that this technique is more capable of significantly improving the quality of the fringe patterns than the classical anisotropic diffusion equation proposed by Perona and Malik. Based on our filtered fringe patterns, the phase map obtained by phase-shifting technique can be extracted more accurately. It is an effective pre-processing method for electronic speckle pattern interferometry.     

Improved biological performance of low modulus Ti-24Nb-4Zr-7.9Sn implants due to surface modification by anodic oxidation

Dental implants are usually made from commercially pure titanium or titanium alloys. The purpose of this study was to evaluate the influence of surface treatment to low modulus Ti-24Nb-4Zr-7.9Sn (TNZS) on cell and bone responses. The TNZS alloy samples were modified using anodic oxidation (AD). Surface oxide properties were characterized by using various surface analytic techniques, involving scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS), X-ray diffractometry (XRD) and surface profilometer. During the AD treatment, porous titanium oxide layer was formed and Ca ions were incorporated into the oxide layer. The viability and morphology of osteoblasts on Ca-incorporated TNZS were studied. The bone responses of Ca-incorporated TNZS were evaluated by pull-out tests and morphological analysis after implantation in rabbit tibiae. The non-treated Ti and TNZS samples were used as the control. Significant increases in cell viability and pull-out forces (p < 0.05) were observed for Ca-incorporated TNZS implants compared with those for the control groups. Porous structures supplied positive guidance cues for osteoblasts to attach. The enhanced cell and bone responses to Ca-incorporated TNZS implants could be explained by the surface chemistry and microtopography.     

Temperature-programmed surface reaction (TPSR) of CH4 synthesis by PdxNi100−x nanoparticles

A series of Pd_xNi_100−x nanoparticles were prepared by the co-precipitation method and analyzed using a temperature-programmed surface reaction (TPSR) of their methanation reactions. ESCA measurement suggested that the as-prepared Pd-Ni alloys had Pd-core/Ni-shell structure. Surface Pd segregation occurred during H₂ reduction and resulted in a surface composition close to the nominal value. The TPSR experiments were performed by pre-adsorption of CO with H₂ to form methane. The peak temperature of methanation increased as Pd content increased, indicating that a methanation reaction is favored on Ni and Ni-rich alloy nanoparticles. For physical mixtures of Pd and Ni nanoparticles, methanation behaviors is similar to those of alloy nanoparticles; but the methanation temperatures of physical mixtures are always higher than those of alloy nanoparticles. This may be due to the formation of a Pd-enriched alloy surface layer during reduction in H₂ at 400 °C, or because the CO molecules adsorbed on the Pd sites spill over onto the Ni sites for methanation. Using TPSR technique and measuring methanation temperature, the top-most surface of such bimetallic nanoparticles can be probed.     

Microstructure, bonding strength and thermal shock resistance of ceramic coatings on steels prepared by plasma electrolytic oxidation

Ceramic coatings were successfully prepared on steel by plasma electrolytic oxidation (PEO) in aluminate electrolyte and silicate electrolyte, respectively. The microstructure of the coatings including surface morphology, phase and element composition were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The bonding strength between the ceramic coating and the substrate was tested using different methods including tensile tests and shearing tests. The thermal shock resistance of the coatings was also evaluated. The results indicated that coatings obtained in both electrolytes were porous and coarse. The average diameters of the pores were below 10 μm. PEO coatings obtained in aluminate electrolyte were composed of Fe₃O₄ and FeAl₂O₄, while those obtained in silicate electrolyte were in a noncrystal state. PEO coatings obtained in aluminate electrolyte showed similar change trend of tensile strength and shearing strength with increasing treating time, namely, a relatively high values with middle time treating and low value with short and long time treating. The best coating was the samples treated with 30 min, whose tensile strength was 20.6 MPa and shearing strength was 16 MPa. The tensile strength and shearing strength of coatings obtained in silicate electrolyte were not strongly influenced by the treating time, the values of which were range in 14 ± 2 MPa and 11 ± 2 MPa, respectively. Coatings obtained in both electrolytes showed the best thermal shock resistance with middle time treating. Coatings obtained in silicate electrolyte show a little better thermal shock resistance than those obtained in aluminate electrolyte.