Synthesis and characterization of a new semi-interpenetrating polymer network hydrogel obtained by gamma radiations

A new polyacrylic acid/polyhydroxybutyrate semi-interpenetrating polymer network hydrogel, the s-IPN/PAA-PHB, was prepared by a gamma radiation-induced polymerization. Thermal behavior was studied by thermogravimetric analysis (TG) and Differential scanning calorimetry (DSC), while the s-IPNs composition, FTIR spectra, and swelling kinetics were also determined. It was found that the DSC curve showed a melting point which is attributed to polyhydroxybutyrate. The TG curves showed various stages of degradation which are in correspondence of the presence of crosslinked polyacrylic acid and confirmed the higher thermal stability of the polymer network. The s-IPN/PAA-PHB composition was 10% of PHB and 90% of PAA. Moreover, the network reached approximately 600% of swelling in water, so it behaves like a superabsorbent hydrogel.     

Rheological behavior and microstructure of 2,2′‐dioxy‐ 1,1′‐binaphthylphosphazene R/S random copolymer

Solutions of a binaphthoxy phosphazene copolymer (containing chiral 2,2′‐dioxy‐1,1′‐binaphthyl units with 50% R and S configurations distributed along the chains) in N‐methyl pyrrolidone were studied by means of continuous flow experiments and small amplitude oscillatory flow tests. A sudden viscosity decrease was observed in the polymer concentration range (39–40 wt %), evidencing a liquid‐crystalline polymer behavior. This has been confirmed by other rheological methods which have demonstrated that, for a sufficiently high concentration, the solutions of the binaphthoxy phosphazene copolymer give rise to a lyotropic system with formation of rigid rods (axial ratio of 10) stacked parallel to each other. The lyotropic properties of our binaphthoxy phosphazene copolymer are compatible with a regular helical structure, similar to that found for a homoleptic binaphthoxy phosphazene, which contains only S configuration. This suggests that the chains of 50% R/S binaphthoxy phosphazene copolymer are, in average, close to the strictly alternating R‐S copolymeric structure of the syndiotactic isomer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Manifolds with S 1-category 2 have cyclic fundamental groups

A closed topological n-manifold M ⁿ is of S ¹-category 2 if it can be covered by two open subsets W ₁, W ₂ such that the inclusions W _i → M ⁿ factor homotopically through maps W _i → S ¹. We show that for n > 3 the fundamental group of such an n-manifold is either trivial or infinite cyclic.     

Preparation of glycopolymer‐coated magnetite nanoparticles for hyperthermia treatment

In this article, magnetite nanoparticles (MNPs) coated with glycopolymer bearing glucose moieties were designed with optimal structural, colloidal, and magnetic properties for biomedical applications. MNPs with an average size of 17 ± 2 nm were synthesized by thermal decomposition process and then their surfaces were modified with active vinyl groups. Two different monomers were immobilized onto the surfaces: dopamine methacrylamide, a monomer with properties inspired on mussels adhesive capacity, or unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]‐oxy}ethyl methacrylate. Afterward, the glycomonomer were polymerized at the interface of both vinyl functionalized MNPs by conventional radical polymerization. The resultant hybrid NPs were water dispersible presenting good stability in aqueous solution for long time periods. Moreover, the high density of carbohydrates at the surface of the magnetic NPs could confer targeting properties to the system as demonstrated by studies of their binding interactions with lectins, where the binding activity is higher as the glycopolymer content augments. The magnetic and magneto‐thermal properties of the synthesized hybrid NPs were evaluated. The magnetization curves reveal superparamagnetic features at 300 K, with high values of saturation magnetization. Furthermore, the hybrid glycoparticles show suitable heat dissipation power when exposed to alternating magnetic field conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Study on the Crystal Structure of RS-1-(2-methoxyphenyl)-4-〔3-(1-naphthyloxy)-2-hydroxypropyl〕-piperazine

ＩＮＴＲＯＤＵＣＴＩＯＮＮａｆｔｏｐｉｄｉｌ，ＲＳ １ （２ ｍｅｔｈｏｘｙｐｈｅｎｙｌ） ４ 〔３ （１ ｎａｐｈｔｈｙｌｏｘｙ） ２ ｈｙｄｒｏｘｙｐｒｏｐｙｌ〕 ｐｉｐｅｒａｚｉｎｅ，ｉｓａｎｏｖｅｌａｎｔｉｈｙｐｅｒｔｅｎｓｉｖｅｄｒｕｇｃｕ...     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Superparamagnetic pH‐sensitive multilayer hybrid hollow microspheres for targeted controlled release

The superparamagnetic multilayer hybrid hollow microspheres have been fabricated using the layer‐by‐layer assembly technique by the electrostatic interaction between the polyelectrolyte cation chitosan (CS) and the hybrid anion citrate modified ferroferric oxide nanoparticles (Fe₃O₄‐CA) onto the sacrificial polystyrene sulfonate microspheres templates after etching the templates by dialysis. The saturation magnetization and magnetite contents of the superparamagnetic multilayer hybrid hollow microspheres were 32.46 emu/g and 51.3%, respectively. The hybrid hollow microspheres showed pH‐sensitive characteristics. The adsorption and release of the basic dye (methylene blue) were applied to investigate the interaction between the amino groups of CS and the carboxyl groups of the Fe₃O₄‐CA nanoparticles in different pH media. The superparamagnetic pH‐sensitive multilayer hybrid hollow microspheres are expected to be used for the targeted controlled release of drugs or in diagnostics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3135–3144, 2010     

Effect of PBT molecular weight and reactive compatibilization on the dispersed‐phase coalescence of PBT/SAN blends

Poly(butylene terephthalate) (PBT)/styrene‐acrylonitrile copolymer (SAN) blends were investigated with respect to their phase morphology. The SAN component was kept as dispersed phase and PBT as matrix phase and the PBT/SAN viscosity ratio was changed by using different PBT molecular weights. PBT/SAN blends were also compatibilized by adding methyl methacrylate‐co‐glycidyl methacrylate‐co‐ethyl acrylate terpolymer, MGE, which is an in situ reactive compatibilizer for melt blending. In noncompatibilized blends, the dispersed phase particle size increased with SAN concentration due to coalescence effects. Static coalescence experiments showed evidence of greater coalescence in blends with higher viscosity ratios. For noncompatibilized PBT/SAN/MGE blends with high molecular weight PBT as matrix phase, the average particle size of SAN phase does not depend on the SAN concentration in the blends. However noncompatibilized blends with low molecular weight PBT showed a significant increase in SAN particle size with the SAN concentration. The effect of MGE epoxy content and MGE molecular weight on the morphology of the PBT/SAN blend was also investigated. As the MGE epoxy content increased, the average particle size of SAN initially decreased with both high and low molecular weight PBT phase, thereafter leveling off with a critical content of epoxy groups in the blend. This critical content was higher in the blends containing low molecular weight PBT than in those with high molecular weight PBT. At a fixed MGE epoxy content, a decrease in MGE molecular weight yielded PBT/SAN blends with dispersed nanoparticles with an average size of about 40 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010