Intake of 210Po, 234U and 238U radionuclides with beer in Poland

²³⁸U, ²³⁴U and ²¹⁰Po activity concentrations were determined in beer in Poland by alpha-spectrometry with low-level activity silicon detectors. The results revealed that the mean concentrations of ²³⁸U, ²³⁴U and ²¹⁰Po in the analyzed beer samples were 4.63, 4.11 and 4.94 mBq·dm⁻³, respectively, the highest in Tyskie (5.71 for ²¹⁰Po, 5.06 for ²³⁴U and 6.11 for ²³⁸U) and the lowest in Lech (2.49 for ²¹⁰Po). The effective radiation dose due to uranium and polonium ingestions by beer was calculated and were compared to the effective radiation dose from drinking water. This revised version was published online in July 2006 with corrections to the Cover Date.     

Formation and thermal decomposition of aluminium nitroxy compounds

During the reactions of lithium oxide with aluminium nitride, and of lithium nitride with aluminium oxide, the formation has been observed of a previously unknown compound, of composition Li₂AlNO. The course of its thermal decomposition has also been determined.

---

Zusammenfassung Es wurde das Auftreten einer bisher unbekannten Verbindung der Zusammensetzung LiAlNO bei den Reaktionen von Lithiumoxid mit Aluminiumnitrid und Lithiumnitrid mit Aluminiumoxid beobachtet. Der Verlauf der thermischen Zersetzung dieser Verbindung wurde bestimmt.

---

Li₂AlNO. .

     

MP2 study of substituent effects of 2-substituted alkyl ethyl methylcarbamates in homogeneous, unimolecular gas phase elimination reaction

Møller-Plesset MP2/6-31G method was used to examine the gas-phase elimination of 2-substituted alkyl ethyl N,N-dimethylcarbamates. The results of these calculations support a concerted non-synchronous six-membered cyclic transition state mechanism for carbamates containing a C_β–H bond at the alkyl side of the ester. These substrates produce the N,N-dimethylcarbamic acid and the corresponding olefin. The unstable intermediate, N,N-dimethylcarbamic acid, rapidly decomposes through a four-membered cyclic transition state to dimethylamine and CO₂ gas. Correlation of the logarithm of theoretical rate coefficients against original Taft's σ* values gave an approximate straight line (ρ*=−1.39, r=0.9558 at 360 °C). In addition to this fact, when log k_rel is plotted against the theoretical log k_rel for 2-substituted ethyl N,N-dimethylcarbamates a reasonable straight line (r=0.9919 at 360 °C) is obtained, suggesting similar mechanism.     

Synthesis of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b][1,4]-diazepin-6-ones from 4,5-diamino-1H-pyrimidin-6-ones and 1-aryl-3-(dimethylamino)-1-propanones

The reaction of 1-aryl-3-(dimethylamino)-1-propanones 1 with one equivalent of 4,5-diamino-1H-pyrimidin-6-ones 2 , in acidic medium, leads to the formation of 4-aryl-2,3,6,7-tetrahydro-1H-pyrimido[4,5-b]-[1,4]diazepin-6-ones 3 . The structure elucidation of the products is based on detail nmr analysis of experiments such as ¹³C, ¹H and DEPT including selective ¹³C{¹H} decoupling experiments.     

The psuedo‐michael reaction of 2‐aminoimidazolines 2. Part 1. Synthesis and structure assignment of isomeric 5(1H)‐Oxo and 7(1H)‐Oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates

The pseudo‐Michael reaction of 1‐aryl‐2‐aminoimidazolines‐2 with diethyl ethoxymethylenemalonate (DEEM) was investigated. Extensive structural studies were performed to confirm the reaction course. For derivatives with N1 aromatic substituents, it was found that the reaction course was temperature dependent. When the reaction temperature was held at ?10 °C only the formation of 1‐aryl‐7(1H)‐oxo‐2,3‐dihydroimi‐dazo[1,2‐a]pyrimidine‐6‐carboxylates ( 4 ) was observed in contrast to earlier suggestions. Under the room temperature conditions, the same reaction yielded mixtures, with varying ratio, of isomeric 1‐aryl‐7(1H)‐oxo‐ ( 4a‐4f ) and 1‐aryl‐5(1H)‐oxo‐2,3‐dihydroimidazo[1,2‐a]pyrimidine‐6‐carboxylates ( 5a‐5f ). The molecular structure of selected isomers, 4b and 5c , was confirmed by X‐ray crystallography. Frontal chro‐matography with delivery from the edge was applied for the separation of the isomeric esters. The isomer ratio of the reaction products depended on the character of the substituents on the phenyl ring. The 1‐aryl‐7(1H)‐oxo‐carboxylates ( 4a‐4f ) were preferably when the phenyl ring contained H, 4‐CH₃, 4‐OCH₃ and 3,4‐Cl₂ substituents. Chloro substitution at either position 3 or 4 in the phenyl ring favored the formation of isomers 5a‐5f . The isomer ratios were confirmed both by ¹H NMR and chromatography. The reaction of the respective hydrobromides of 1‐aryl‐2‐aminoimidazoline‐2 with DEEM, in the presence of triethylamine, gave selectively 5(1H)‐oxo‐esters ( 5a‐5f ).     

Synthese und Charakterisierung von Aquapentachloroplatinaten(IV) – Struktur von [K(18-Krone-6)][PtCl5(H2O)]

Synthesis and Characterization of Aquapentachloroplatinates(IV) – Structure of [K(18-crown-6)][PtCl₅(H₂O)] The crown ether complex of the aquapentachloroplatinic acid of the composition [H₁₃O₆][PtCl₅(H₄O₂)] · 2(18-cr-6) ( 2 ) reacts with K₂CO₃ and [NⁿBu₄]OH in aqueous solution to give [K(18-cr-6)][PtCl₅(H₂O)] ( 5 a ) and [NⁿBu₄][PtCl₅(H₂O)] · ¹/₂ (18-cr-6) · H₂O ( 5 b ), respectively. Both compounds were characterized by microanalysis, vibrational (IR, Raman) and NMR (¹H, ¹³C, ¹⁹⁵Pt) spectroscopy. The X-ray structure analysis of 5 a (orthorhombic, pnma; a = 16,550(4), b = 18,044(3), c = 7,415(1) Å; Z = 4; R1 = 0,0183; wR2 = 0,0414) reveals that the crystal is threaded by chains built up of [PtCl₅(H₂O)]^? and [K(18-cr-6)]⁺ units. There are tight K …? Cl contacts (d(K? Cl1)) = 3,0881(9) Å and O_W? H? O_cr hydrogen bridges (d(O1 …? O2) = 2,806(3) Å) between these units. The coordination polyhedron [PtCl₅O] has approximately C_4v symmetry.     

Synthesis and Characterization of Pyrrolthiosemicarbazone Complexes of Palladium(II). Crystal Structures of [{Pd[C4H4NC(H)=NNC(S)NHMe](Cl)}2{μ‐Ph2P(CH2)3PPh2}] and [Pd{C4H4NC(H)=NNC(S)NHMe}{Ph2P(CH2)2PPh2‐P,P}](Cl)

Reaction of the thiosemicarbazone ligands C₄H₄NC(H)=NN(H)C(S)NHR (R = Me, a ; Et, b ) with Li₂[PdCl₄] gave the dinuclear complexes [Pd{C₄H₄NC(H)=NNC(S)NHR}(μ‐Cl)]₂ (R = Me, 1a ; Et, 1b ) with a central Pd₂Cl₂ core and with deprotonation of the thiosemicarbazones at the hydrazinic nitrogen atom. Treatment of 1a and 1b with triphenylphosphine gave the mononuclear compounds [Pd{C₄H₄C(H)=NNC(S)NHR}(Cl)(PPh₃)] (R = Me, 2a ; Et, 2b ), whereas reaction of 1a and 1b with tertiary diphosphines gave mono‐ and dinuclear compounds, as appropriate, with the corresponding diphosphine acting as a monodentate ( 6b ), chelating ( 3a ) and bridging ligand ( 4a, 5a , 4b, 5b ). Treatment of 1a and 1b with (Ph₂PCH₂CH₂PPh₂)W(CO)₅ gave the new heterobimetallic complexes 7a and 7b . The crystal structures of complexes 3a and 4a are described.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Rapid qualitative analysis of metallic alloys by electrospot chromatography

Summary Electrography and paper chromatography were combined to analyse rapidly metallic alloys in an almost non destructive technique. Using anodic dissolution the sample is applied on the start point of the chromatographic paper. Known ketones-HCl-water mixtures are usually used as solvents to analyse electrospots of different alloys and metal coatings and a separate electrospottest is recommended for Cr. Results of qualitative analysis of some steels, Cu–Ni, and Pb alloys are presented.     

Molecular-level control of the photoluminescence from PPV nanostructured films

The fabrication of varied molecular architectures in layer-by-layer (LbL) films is exploited to control the photoluminescence (PL) of poly(p-phenylene vinylene) (PPV) in an unprecedented way. This was achieved by controlling the F?rster energy transfer between PPV layers (donors) and layers of a commercial azodye, Brilliant Yellow (BY) (acceptors). Energy transfer was controlled by inserting spacer layers of inert polymers between PPV and BY layers and by photoaligning the BY molecules via trans-cis-trans isomerization. The PPV/BY LbL films displayed polarized PL whose intensity could be varied almost continuously by changing the time of photoalignment, which was carried out by impinging a linearly polarized laser light simultaneously to the PL experiments. For PPV/BY films with no spacer layers, PL was completely quenched, but its intensity increased with the number of spacing layers. Further increase in PL was obtained by photoaligning the BY molecules perpendicularly to the PPV molecules. This minimizes energy transfer, since F?rster processes are directional, dipole-dependent resonant transfers. Energy transfer is also controlled by imparting a preferential orientation of the PPV chains on PPV/BY LbL films deposited onto flexible Teflon substrates that may be stretched.