Routine analysis by high precision gas chromatography/mass selective detector/isotope ratio mass spectrometry to 0.1 parts per mil

Stable isotope methods are potentially quite useful for validating natural or enhanced mineral degradation of contaminants. For this reason, a continuous flow gas chromatograph (GC), isotope ratio mass spectrometer (IRMS) has been coupled with a quadrupole mass selective detector (MSD) to allow simultaneous mass spectral and stable carbon isotope ratio data to be obtained from a single chromatographic analysis. This allows the target contaminant and any extra-cellular degradation intermediates to be both qualified and quantified. Previously acceptable limits of precision (0.3 parts per mil) are undesirable given the small fractionation observed during aerobic degradation. To further understand the fate of organic contaminants and to gain information about the metabolic degradative pathway employed by a microorganism, routine isotopic analyses on a range of analytes have been performed. Quantities of sample producing mass-44 ion beam signal (I(44)) of 2 x 10(-10) to 1 x 10(-8) A were analysed. When the IRMS was tuned for high sensitivity, ion source nonlinearities were overcome by peak height correction from an algorithm that was produced using known isotopic standards of varying concentrations. This led to sample accuracy of <0.01 per thousand and sample precision of 0.1 per thousand. Copyright 1999 John Wiley & Sons, Ltd.     

Investigation of the quantitative properties of the quadrupole orthogonal acceleration time-of-flight mass spectrometer with electrospray ionisation using 3,4-methylenedioxymethamphetamine

This paper describes the investigation of the potential of a quadrupole orthogonal acceleration time-of-flight mass spectrometer (Q-TOF) equipped with an atmospheric pressure ionisation interface for quantitative measurements of small molecules separated by reversed phase liquid chromatography. To this end, the detection limits and linear dynamic range in particular were studied in an LC/MS/MS experiment using 3,4-methylenedioxymethamphetamine standards and 3,4-methylenedioxyethylamphetamine for internal standardisation. In a second phase, the experiment was repeated with real biological extracts (whole blood, serum, and vitreous humour). A calibration for 3,4-methylenedioxymethamphetamine and its metabolite 3,4-methylenedioxyamphetamine was prepared in each of these matrices again using 3,4-methylenedioxyethylamphetamine as internal standard. The resulting quantitative data were compared with those obtained by liquid chromatography with fluorescence detection for the same extracts. The Q-TOF results revealed excellent sensitivity and a linear dynamic range of nearly four decades (2-10 000 pg on-column, r(2) = 0.9998, 1/x weighting). Furthermore, all the calibration curves prepared in biological material were superimposable, LC/MS/MS and LC-fluorescence, and the quantitative results for actual samples compared very favourably. It was concluded that the Q-TOF achieves a linear dynamic range for quantitative LC/MS/MS work exceeding that of fluorescence detection and at much better absolute sensitivity. Copyright 1999 John Wiley & Sons, Ltd.     

Structure of 72,74Se at high spin

Lifetimes of high spin states up to { }=22⁺ in the yrast positive parity bands have been measured to investigate the shape evolution with increasing spin in ^{72, 74}Se. The Q _t values derived from these measurements indicate that prolate shape stabilizes for ⁷²Se, while a triaxial shape develops for ⁷⁴Se at higher spins. Comparison of the observed trend in Q _t with spin for ^{72, 74}Se with that of the corresponding kryptones isotones emphasizes the stability provided by N=38 prolate shell gap even at high rotational frequency.     

Adsorption of butane isomers and SF6 on Kureha activated carbon: 1. Equilibrium

Adsorption equilibria of butane isomers and SF6 on Kureha activated carbon were investigated using the volumetric method and the tapered element oscillating microbalance (TEOM) technique. The isotherm data of the butane isomers measured by the TEOM technique are in good agreement with those determined by the volumetric method. Single-component adsorption isotherms are reported at temperatures in the range from 298 to 393 K and at pressures up to 120 kPa. SF6 molecules are mainly adsorbed in the larger micropores, resulting in a lower adsorption capacity. The amount adsorbed for n-butane is slightly higher than that for isobutane in the whole range investigated. This is attributed to the fact that the linear n-butane molecule can adsorb in the smaller micropores. The T6th model appropriately describes the equilibrium data of the butane isomers, while the isotherm data of SF6 can be fitted by the Langmuir model. The isosteric heats associated with adsorption for these three adsorptives show different loading dependences. The present study indicates that the activated carbon can be well characterized by the probe molecules having different molecular sizes.     

抗坏血酸有机锗倍半氧化物的合成及抗癌活性研究

通过三氯锗仿与抗坏血酸分子的加成反应,合成了一种新型有机锗倍半氧化物,产物的结构通过元素分析、IR及UV光谱等方法进行了表征．生物活性实验表明合成物对小鼠S-180肿瘤生长具有显著的抑制作用．     

Direct demonstration of enhanced diffusion in mesoporous ZSM-5 zeolite obtained via controlled desilication

A 2 orders of magnitude gas transport improvement in a medium pore ZSM-5 zeolite has been achieved upon introduction of intracrystalline mesoporosity in gradient-free crystals by desilication post-treatment in alkaline medium.     

In situ monitoring of desilication of MFI-type zeolites in alkaline medium

In situ pH and Attenuated Total Reflection (ATR) infrared techniques have been successfully applied in order to gain insights into the dissolution process connected to mesopore formation occurring upon alkaline treatment of ZSM-5 zeolites. Online pH measurements reveal a similar consumption of OH(-) ions in the initial stage of the reaction independent of the Si/Al ratio of the zeolite. In view of the greatly different mesoporosity development, the extraction of polymeric silica entities is anticipated, its structure depending on the framework Si/Al ratio. In agreement, ATR-IR experiments have confirmed dissolution of polymeric silicon-containing species that in the course of the alkaline treatment disintegrate into smaller entities. A direct relation between the type of porosity developed and the process of silicon extraction as measured in the liquid phase cannot be drawn.     

Catalytic and Mechanistic Insights of the Low‐Temperature Selective Oxidation of Methane over Cu‐Promoted Fe‐ZSM‐5

The partial oxidation of methane to methanol presents one of the most challenging targets in catalysis. Although this is the focus of much research, until recently, approaches had proceeded at low catalytic rates (<10 h^?1), not resulted in a closed catalytic cycle, or were unable to produce methanol with a reasonable selectivity. Recent research has demonstrated, however, that a system composed of an iron‐ and copper‐containing zeolite is able to catalytically convert methane to methanol with turnover frequencies (TOFs) of over 14 000 h^?1 by using H₂O₂ as terminal oxidant. However, the precise roles of the catalyst and the full mechanistic cycle remain unclear. We hereby report a systematic study of the kinetic parameters and mechanistic features of the process, and present a reaction network consisting of the activation of methane, the formation of an activated hydroperoxy species, and the by‐production of hydroxyl radicals. The catalytic system in question results in a low‐energy methane activation route, and allows selective C₁‐oxidation to proceed under intrinsically mild reaction conditions.     

Preparation, characterization and testing of nickel on alumina monolithic catalysts

A series of Ni on alumina washcoated monoliths has been prepared and characterized. The selective liquid-phase hydrogenation of benzaldehyde to benzyl alcohol in a Berty reactor has been used as a test reaction.     

Effect of the Support in de-NOx HC-SCR Over Transition Metal Catalysts

Several catalysts based on transition metals (Cu, Co, Fe) and different supports (ZSM-5, activated carbon, Al₂O₃) have been tested by Temperature-Programmed Reaction (TPR) experiments for the selective catalytic reduction of NO_x with propene in the presence of excess oxygen, simulating lean-burn conditions. The activity order with respect to the metal was CuFe>Co for all supports used. ZSM-5 catalysts have a superior behavior over Al₂O₃, as observed for noble metal catalysts. Application of activated carbon as a support is not practical due to its consumption at the reaction temperatures. The selectivity to N₂ of the catalysts was also independent of the support, being higher than 95% in all the cases.