The key intermediates that interact with the fluorophores in the peroxyoxalate chemiluminescence reaction of 2,4,6-trichlorophenyl N-aryl-N-tosyloxamates

A kinetic study of peroxyoxalate chemiluminescence reactions employing 2,4,6-trichlorophenyl N-aryl-N-tosyloxamates supports the 1,2-dioxetanones still bearing the eliminating group as the key intermediates that interact with the fluorophores rather than 1,2-dioxetanedione.     

Reverse current reduction of Ge photodiodes on Si without post-growth annealing

A new approach to reduce the reverse current of Ge pin photodiodes on Si is presented, in which an i-Si layer is inserted between Ge and top Si layers to reduce the electric field in the Ge layer. Without post- growth annealing, the reverse current density is reduced to -10 mA/cm^2 at -1 V, i.e., over one order of magnitude lower than that of the reference photodiode without i-Si layer. However, the responsivity of the photodiodes is not severely compromised. This lowered-reverse-current is explained by band-pinning at the i-Si/i-Ge interface. Barrier lowering mechanism induced by E-field is also discussed. The presented ＂non-thermal＂ approach to reduce reverse current should accelerate electronics-photonics convergence by using Oe on the Si complementary metal oxide semiconductor （CMOS） platform.     

Development of ion transportation, extraction and neutralization systems for atomic beam resonance method

A device that produces a low-energy and largely spin polarized RI beam based on the atomic beam resonance method (RIABR) has been developed. We have performed measurements of stopping and drifting an incoming RI ion beam in a gas chamber, extraction of the ions into a vacuum region, and neutralization of the extracted low-energy ion beam. The drift efficiency of RI ions in a gas and the extraction efficiency at a Laval-type glass nozzle were found to be 0.72±0.04 and 0.033, respectively. The result of the experiment for the neutralization is also discussed.     

Control of peroxyoxalate chemiluminescence by nitrogen-containing ligand quenching: turning off and on by ligand-metal ion host-guest interactions

The control of peroxyoxalate chemiluminescence (PO-CL) by the coordination of nitrogen-containing ligands and metal cations was investigated. Turning the CL off and on was done by PO-CL using 15-monoazacrown-5-tethered anthracene and alkali metal ions. CL quenching and regeneration was also observed in the separated molecular system of 15-monoazacrown-5 and the fluorophores. CL quenching by a number of ligands bearing dipicolylamino groups was evaluated by these PO-CL reactions and found to be closely related to their oxidation potentials, which is dependent on the Weller rate law for electron exchange and this provides strong support for the existence of the CIEEL PO-CL process. When Zn²⁺ or Cu²⁺ are added to the PO-CL system quenched by the ligand, N-[2-(2,2′-dipicolylamino)ethyl]aniline, CL was turned on because the electron donating ability of the ligands was modulated. This was controlled by the coordination of the studied metal ions and, therefore, this system results in CL because of host-guest interactions.     

Portable formaldehyde monitoring device using porous glass sensor and its applications in indoor air quality studies

We have developed a portable device for formaldehyde monitoring with both high sensitivity and high temporal resolution, and carried out indoor air formaldehyde concentration analysis. The absorbance difference of the sensor element was measured in the monitoring device at regular intervals of, for example, one hour or 30 min, and the result was converted into the formaldehyde concentration. This was possible because we found that the lutidine derivative that was formed as a yellow product of the reaction between 1-phenyl-1,3-butandione and formaldehyde was stable in porous glass for at least six months. We estimated the reaction rate and to be 0.049 min⁻¹ and the reaction occurred quickly enough for us to monitor hourly changes in the formaldehyde concentration. The detection limit was 5 μg m⁻³ h. We achieved hourly formaldehyde monitoring using the developed device under several indoor conditions, and estimated the air exchange rate and formaldehyde adsorption rate, which we adopted as a new term in the mass balance equation for formaldehyde, in one office.     

Peptide bond formation by aminolysin-A catalysis: a simple approach to enzymatic synthesis of diverse short oligopeptides and biologically active puromycins

A new S9 family aminopeptidase derived from the actinobacterial thermophile Acidothermus cellulolyticus was cloned and engineered into a transaminopeptidase by site-directed mutagenesis of catalytic Ser(491) into Cys. The engineered biocatalyst, designated aminolysin-A, can catalyze the formation of peptide bonds to give linear homo-oligopeptides, hetero-dipeptides, and cyclic dipeptides using cost-effective substrates in a one-pot reaction. Aminolysin-A can recognize several C-terminal-modified amino acids, including the l- and d-forms, as acyl donors as well as free amines, including amino acids and puromycin aminonucleoside, as acyl acceptors. The absence of amino acid esters prevents the formation of peptides; therefore, the reaction mechanism involves aminolysis and not a reverse reaction of hydrolysis. The aminolysin system will be a beneficial tool for the preparation of structurally diverse peptide mimetics by a simple approach.     

The excited state dipole moments of betaine pyridinium investigated by an innovative solvatochromic analysis and TDDFT calculations

This work reports on the solvatochromic properties of a simple heterocyclic betaine pyridinium, 2-(1-pyridinio)benzimidazolate (SBPa), having promising potentialities in non-linear optics. From advanced PCM-TDDFT calculations, the solvatochromism of SBPa was found to be unusual, involving two different electronic states for absorption (S(0)→ S(2)) and emission (S(1)→S'(0)). To account for this behavior, we developed an innovative physical treatment which consists in a non-linear fit of the solvatochromic data using the Bilot-Kawski theoretical model and visualizing the least-square coefficient χ(2) on a 2D map as a function of the solute polarizability and gas phase absorption energy. In parallel, Kamlet-Taft correlations were undertaken to select a propitious set of electrostatic solvents usable in this treatment. Protic solvents that lead to specific interactions and nonpolar solvents that favor dimerization processes were excluded. From a choice of aprotic solvents with sufficiently high polarity, 4 dipole moments μ(g)(S(0)) = +9.1 D, μ(e)(S(2)) = -1.5 D, μ(e)(S(1)) = 0 D and μ(g)(S'(0)) = +3.31 D were determined, the 3 former values being in close agreement with TDDFT values, although the solute polarizability values seem underestimated. Anyhow, disregarding this discrepancy, we evaluated the static hyperpolarizability to β(0) = -64 × 10(-30) esu from the solvatochromic data in close agreement with DFT calculations.     

Beyond the standard model physics at RHIC in polarized pp collision

An polarized hadron collider experiment must have a great discovery potential for a search of physics beyond the standard model. Experimental data of various symmetry tests at RHIC are going to be obtained within a few years. The author developed a simulation tool, studying a sensitivity of hunting contact interaction at RHIC by measuring parity violating spin asymmetries.