Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

High-resolution GaP Terahertz Spectrometer and Its Application to Detect Defects in Gamma-irradiated Glucose Crystal

We developed high-resolution GaP THz signal generator using Cr:Forsterite lasers with gratings as both a pump and a signal beam for difference-frequency generation. A line width of less than 500 MHz and a wide tunable frequency range (0.6–6.2 THz) provide sufficient resolution for measuring materials with sharp absorption bands using the generator as the light source for a THz spectrometer. This is suitable for materials such as gases or solid samples at low temperatures. We demonstrated the detection of defects in organic materials, as they appear as slight deviations in the absorption frequency in the THz region.     

Spectroscopic and photoluminescence studies on optically transparent magnetic nanocomposites based on sol–gel glass: Fe3O4

Sol–gel glasses with Fe₃O₄ nanoparticles having particle sizes laying in the range 10–20 nm were encapsulated in the porous network of silica resulting in nanocomposites having both optical and magnetic properties. Spectroscopic and photoluminescence studies indicated that Fe₃O₄ nanocrystals are embedded in the silica matrix with no strong Si–O–Fe bonding. The composites exhibited a blue luminescence. The optical absorption edge of the composites red shifted with increasing concentration of Fe₃O₄ in the silica matrix. There is no obvious shift in the position of the luminescence peak with the concentration of Fe₃O₄ except that the intensity of the peak is decreased. The unique combinations of magnetic and optical properties are appealing for magneto–optical applications.     

Pulsed laser deposition of ZnO grown on glass substrates for realizing high-performance thin-film transistors

We report characterization of ZnO thin-film transistors (TFTs) on glass substrates fabricated by pulsed laser deposition (PLD). ZnO films were characterized by X-ray diffraction (XRD), atomic force microscopy and Hall effect measurements. The XRD results showed high c-axis-oriented ZnO(0002) diffraction corresponding to the wurtzite phase. Moreover, the crystallization and the electrical properties of ZnO thin films grown at room temperature are controllable by PLD growth conditions such as oxygen gas pressure. The ZnO films are very smooth, with a root-mean-square roughness of 1 nm. From the Hall effect measurements, we have succeeded in fabricating ZnO films on glass substrates with an electron mobility of 21.7 cm²/V s. By using the ZnO thin film grown by two-step PLD and a HfO₂ high-k gate insulator, a transconductance of 24.1 mS/mm, a drain current on/off ratio of 4.4×10⁶ and a subthreshold gate swing of 0.26 V/decade were obtained for the ZnO TFT.     

Highly efficient cryogenically-cooled Yb:YAG laser

A MOPA laser system for high pulse energy and high average power has been developed by using a cryogenic Yb:YAG. In the regenerative amplifier with our original TRAM architecture, the high pulse energies of 6.5 and 1.5 mJ were obtained at the repetition rate of 200 Hz and 1 kHz, respectively. An optical efficiency was as high as η_o-o = 9.3% with an excellent beam quality of M ² < 1.1, which ensured that a cryogenic Yb:YAG TRAM had a high thermal strength. The following four pass power amplifier with a cryogenic Yb:YAG rod showed 140 mJ at 100 Hz. Both a high optical efficiency of η_o-o = 30% and a high slope efficiency of η_s = 44% showed that an efficient laser operation could be realized for a power amplification with both a high pulse energy and a high average power by using a cryogenic Yb:YAG.     

Jet ejection from droplets near the Leidenfrost temperature

Abstract  

Droplets impinging on a hot surface that is near the Leidenfrost temperature were experimentally investigated. Ejection of jets from the top of the droplet was observed during the transient interaction between the droplet and a hot wall. We term this phenomenon jet ejection from droplets. When the bottom of the droplet initially impacts the hot surface, a jet is to be ejected from the top of the droplet. The jet ejection occurred only at low impact velocities and around the wetting limit temperature. It was not observed when droplets were dropped from large heights or when the surface was at a high temperature.     

Investigation of the relationship between the ionic conductivity and the local structures of singly and doubly doped ceria compounds using EXAFS measurement

The oxide ionic conductivity measurements of singly and doubly doped ceria compounds were carried out. Singly and doubly doped ceria used in this study were Ce_0.8Ln_0.2O_1.9 (Ln=Y, Sm, Nd, or La) and Ce_0.8La_0.1Y_0.1O_1.9, respectively. Lattice constants of these compounds were in proportion to the ionic radius of the dopant(s). The doubly doped ceria compound showed oxide ionic conductivity comparative to the average of that of each corresponding singly doped sample. This finding indicates that the conductivity is influenced by both dopants in the doubly doped compounds. The extended X-ray absorption fine structure (EXAFS) study showed that the coordination number of oxide ions at the nearest neighbor of cation was related to the ionic conductivity. It was found that the conductivity gave the highest value when oxygen vacancies were randomly distributed in the lattice. This indicates that the local structure seriously affects oxide ionic conduction in singly and doubly doped ceria compounds.     

Nuclear Moment Studies with Polarized Radioactive Nuclear Beams

Magnetic dipole and electric quadrupole moments of nuclei in the light-mass neutron-rich region have been studied by taking advantage of spin-polarized radioactive nuclear beams that have been obtained from the projectile fragmentation reaction. Analyses of the results reveal a few interesting phenomena characteristic of nuclear structures in this region. In particular, we report in some detail the latest result on the magnetic moment of the ¹⁷C ground state. The distinctly small value of the g-factor obtained, |g(¹⁷C)|=0.5054±0.0025, clearly excludes a I ^π=1/2⁺ candidate for the spin-parity assignment of this marginally bound nucleus, providing a reasonable account of the non-halo nature reported in recent breakup reaction experiments. Finally, future plans at the upcoming radioactive beam facility presently under construction at RIKEN are briefly mentioned. This revised version was published online in September 2006 with corrections to the Cover Date.     

Transition between internal transport barriers with different temperature-profile curvatures in JT-60U Tokamak plasmas

A spontaneous transition phenomena between two states of a plasma with an internal transport barrier (ITB) is observed in the steady-state phase of the magnetic shear in the negative magnetic shear plasma in the JT-60U tokamak. These two ITB states are characterized by different profiles of the second radial derivative of the ion temperature inside the ITB region (one has a weak concave shape and the other has a strong convex shape) and by different degrees of sharpness of the interfaces between the L mode and the ITB region, which is determined by the turbulence penetration into the ITB region.     

Numerical simulation of 2D granular particles and its analyses by means of the micropolar fluid model

Numerical simulations of two-dimensional granular flows under uniform mean shear and external body torque were performed following the setting of the authors’ previous study [10]. Convergence of the stresses with the increase of coarse-graining length is investigated. Difference R between vorticity field and spin field is controlled by the external torque and the stresses for the region R > 0 is obtained as well as those for R < 0. The symmetry of the stresses under the change of the sign of R is discussed.