Some aspects of environmental radioactivity around the former Soviet Union"""s Semipalatinsk nuclear test site: Local fallout Pu in Ust"""-Kamenogorsk district

The ¹³⁷Cs, ²³⁸Pu and ^239,240Pu activity concentrations were determined together with the atomic ratios of ²⁴⁰Pu/²³⁹Pu for the soil samples at 19 sites from the Ust"-Kamenogorsk district, located more than 300 km east of the Semipalatinsk nuclear test site (SNTS). The mean areal deposition of ¹³⁷Cs ranged from 1,500 to 4,100 Bq/m². However, some hot spot-like areas showing high concentrations of 5,500–7,700 Bq/m² were foundat some sites within the city. The ^239,240Pu levels ranged from <50 to 510 Bq/m², however most of them ranged between 120–200 Bq/m². These levels are nearly the same as those around the Semipalatinsk City. At most of the sites within the city and its adjacent areas, both nuclides were found in the soil layers up to a depth of 30 cm. A fraction of 20–50% of ^239,240Pu was not leached by hot digestion with concentrated HNO₃ containing a small amount of H₂O₂. Generally, such tightly bound fraction showed a trend to decrease with increasing distance from the SNTS. The fraction of these radionuclides that were deposited in Ust"-Kamenogorsk district from global and from SNTS fallouts have been determined using the ²⁴⁰Pu/²³⁹Pu atomic ratios in both Pu fractions: one which can be leached with hot HNO₃ + H₂O₂ and another that is a non-leacheable for each soil layer of core samples. As a result a fraction of 21–80% (mostly 30–60%) of total ^239,240Pu were found to be due to the local fallout of Pu from the SNTS debris. For ¹³⁷Cs, the contribution (mostly 10–20%) of local fallout from the SNTS were estimated to be far lower as compared to ^239,240Pu.     

Palladium catalyzed synthesis of mandelate derivatives from arylboronic acids and glyoxylate hemiacetals

NHC-coordinated cyclometalated palladium(II) catalyzed addition of arylboronic acids to methyl 2-hydroxy-2-methoxyacetate gave corresponding various functionalized methyl mandelate derivatives in good yields.     

Cocrystallization of Two Different Pseudorotamers of Monocyclic Phosphorane Bearing Two Martin Ligands

Solution and crystal structures of monocyclic pentacoordinate phosphoranes bearing two Martin ligands and two carbon substituents are described. When the two carbon substituents are different, relative apicophilicity of the two monodentate carbon substituents could be determined based on the equilibrium ratio of the pseudorotamers. In some cases, x-ray structural analysis could be carried out and the crystallized structure from CH 3 CN is consistent with the major pseudorotamer in solution (CD 3 CN). Furthermore, when the equilibrium ratio of pseudorotamers is almost unity, novel cocrystallization of two pseudorotamers in a single crystal was observed.     

Fiber Structure,Tensile Behavior and Antibacterial Activity of Polylactide/Poly(butylene terephthalate) Bicomponent Fibers Produced by High-Speed Melt-Spinning

Abstract

Various types of bicomponent fibers composed of polylactide (PLA) and poly(butylene terephthalate) (PBT) with different molecular weights, arranging the polymers separately in the skin or core, were produced by high-speed melt-spinning. The bicomponent spinning, arranging the PLA with high molecular weight (melt flow rate =1.9?g/10?min, L-lactide content = 98.7%) in the skin and the PBT with low molecular weight (IV = 0.835–0.865 dL/g) in the core, resulted in orientation-induced crystallization in the PLA component at the spinning speed of 2?km/min. This crystallization effect was ascribed to a chain-extending treatment applied to the original PLA (MFR = 4.0?g/10?min) to increase its molecular weight. By the treatment the PLA could crystallize when spun even at 1?km/min in its single-component spinning. On the other hand, the bicomponent spinning system interfered with the orientation-induced crystallization of PBT in the core. As a result, the critical spinning speed needed to generate the orientation-induced crystallization in the core PBT was elevated to 4?km/min. The inferior tensile behavior of the bicomponent fibers, as compared to the single-component PLA or PBT fibers, suggested poor compatibility between PLA and PBT. Transesterification reactions rarely occurred at the interface of the two polymers. The bicomponent fibers prepared from high molecular weight PLA and low molecular weight PBT, however, showed sufficient antibacterial activity and physical properties to be suitable for designing medical clothing materials.     

Selective Hydroperoxygenation of Olefins Realized by a Coinage Multimetallic 1-Nanometer Catalyst

The science of particles on a sub-nanometer (ca. 1 nm) scale has attracted worldwide attention. However, it has remained unexplored because of the technical difficulty in the precise synthesis of sub-nanoparticles (SNPs). We recently developed the “atom-hybridization method (AHM)” for the precise synthesis of SNPs by using a suitably designed macromolecule as a template. We have now investigated the chemical reactivity of alloy SNPs obtained by the AHM. Focusing on the coinage metal elements, we systematically evaluated the oxidation reaction of an olefin catalyzed by these SNPs. The SNPs showed high catalytic performance even under milder conditions than those used with conventional catalysts. Additionally, the hybridization of multiple elements enhanced the turnover frequency and the selectivity for the formation of the hydroperoxide derivative. We discuss the unique quantum-sized catalysts providing generally unstable hydroperoxides from the viewpoint of the miniaturization and hybridization of materials.