Unraveling Inter‐ and Intrachain Electronics in Polythiophene Assemblies Mediated by Coordination Nanospaces

Strong interchain interactions render unsubstituted polythiophene un‐fusible, non‐melting, and insoluble. Therefore, control of the packing structure, which has a profound effect on the optical and electronic properties of the polymer, has never been achieved. Unsubstituted polythiophene was prepared in the one‐dimensional channels of [La(1,3,5‐benzenetrisbenzoate)]_n, where polymer chains form unprecedented assembly structures mediated by the host framework. It is noteworthy that the emission and carrier transport properties were drastically changed by varying the number of chains within a particular assembly. The response of the composite to additional guests is also examined as a method to use the composites as low‐concentration sensors. Our findings show that the encapsulation of polymer chains in host materials is a facile method for understanding the intrinsic properties of conjugated polymers, along with controlling and enhancing their functions.     

Charge‐Transfer Phase Transition of a Cyanide‐Bridged FeII/FeIII Coordination Polymer

Heterometallic Prussian blue analogues are known to exhibit thermally induced charge transfer, resulting in switching of optical and magnetic properties. However, charge‐transfer phase transitions have not been reported for the simplest FeFe cyanide‐bridged systems. A mixed‐valence Fe^II/Fe^III cyanide‐bridged coordination polymer, {[Fe(Tp)(CN)₃]₂Fe(bpe)?5 H₂O}_n, which demonstrates a thermally induced charge‐transfer phase transition, is described. As a result of the charge transfer during this phase transition, the high‐spin state of the whole system does not change to a low‐spin state. This result is in contrast to FeCo cyanide‐bridged systems that exhibit charge‐transfer‐induced spin transitions.     

Preparation and characterization of polyion complex micelles with a novel thermosensitive poly(2-isopropyl-2-oxazoline) shell via the complexation of oppositely charged block ionomers

Novel thermosensitive polyion complex (PIC) micelles were prepared in an aqueous medium based on the complexation of a pair of oppositely charged block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(amino acid)s (PiPrOx-b-PAA), containing thermosensitive PiPrOx segments. The controlled synthesis of PiPrOx-b-PAA was achieved via the ring-opening anionic polymerization of N-carboxyanhydrides (NCA) of either eta-benzyloxycarbonyl-l-lysine (Lys(Z)-NCA) or beta-benzyl-l-aspartate (BLA-NCA) with omega-amino-functionalized PiPrOx macroinitiators and the subsequent deprotection reaction under acidic or basic conditions. Gel permeation chromatography (GPC) and 1H NMR spectroscopy revealed that the syntheses of two block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(l-lysine) [PiPrOx-P(Lys)] and poly(2-isopropyl-2-oxazoline)-b-poly(aspartic acid) [PiPrOx-P(Asp)], proceeded almost quantitatively to give samples with a narrow molecular weight distribution (Mw/Mn 相似文献   

Array of aromatic amino acid side chains located near the chromophore of photoactive yellow protein

The role of the array of aromatic amino acid side chains located close to the chromophore binding loop of photoactive yellow protein (PYP) was studied using the alanine-substitution mutagenesis. Phe92, Tyr94, Phe96 and Tyr98 were replaced with alanine (F92A, Y94A, F96A and Y98A, respectively), then these mutants were characterized by UV-visible absorption spectra, circular dichroism (CD) spectra, thermal stability and photocycle kinetics. Absorption maxima of F92A, Y94A, F96A and Y98A were 444, 442, 439 and 447 nm, respectively, different to wild type (WT) at 446 nm. Far-UV CD spectra of mutants other than F92A were different from WT, indicating that Tyr94, Phe96 and Tyr98 maintain the native secondary structure of PYP. Mid-point temperatures of thermal denaturation of F92A, Y94A and F96A, estimated by the CD signal at 222 nm, were 5-10 degrees C lower than WT. Time constants of the photocycle estimated by flash-induced absorbance change were 0.36 s for WT and 1.4 s for Y98A, however, 100, 30 and 3000 times slower than WT for F92A, Y94A and F96A, respectively. Tyr98 is located in the loop region, whereas Phe92, Tyr94 and Phe96 are incorporated in the beta4 strand, showing that aromatic amino acid residues in the beta-sheet regulate the absorption spectrum, thermal stability and photocycle of PYP. Aromatic rings of Phe92, Tyr94 and Phe96 lie nearly perpendicular to the aromatic ring of Phe75 or chromophore. Possible weak hydrogen bonds between the aromatic ring hydrogen and pi-electrons of these residues are discussed.     

Ultrashallow depth profiling using SIMS and ion scattering spectroscopy

The accuracy of ultrashallow depth profiling was studied by secondary ion mass spectrometry (SIMS) and high‐resolution Rutherford backscattering spectroscopy (HRBS) to obtain reliable depth profiles of ultrathin gate dielectrics and ultrashallow dopant profiles, and to provide important information for the modeling and process control of advanced complimentary metal‐oxide semiconductor (CMOS) design. An ultrathin Si₃N₄/SiO₂ stacked layer (2.5 nm) and ultrashallow arsenic implantation distributions (3 keV, 1 × 10¹⁵ cm^?2) were used to explore the accuracy of near‐surface depth profiles measured by low‐energy O₂⁺ and Cs⁺ bombardment (0.25 and 0.5 keV) at oblique incidence. The SIMS depth profiles were compared with those by HRBS. Comparison between HRBS and SIMS nitrogen profiles in the stacked layer suggested that SIMS depth profiling with O₂⁺ at low energy (0.25 keV) and an impact angle of 78° provides accurate profiles. For the As⁺‐implanted Si, the HRBS depth profiles clearly showed redistribution in the near‐surface region. In contrast, those by the conventional SIMS measurement using Cs⁺ primary ions at oblique incidence were distorted at depths less than 5 nm. The distortion resulted from a long transient caused by the native oxide. To reduce the transient behavior and to obtain more accurate depth profiles in the near‐surface region, the use of O₂⁺ primary ions was found to be effective, and 0.25 keV O₂⁺ at normal incidence provided a more reliable result than Cs⁺ in the near‐surface region. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface derivatization of poly(p-phenylene terephthalamide) fiber designed for novel separation and extraction media

The surface derivatization of poly(p-phenylene terephthalamide) fiber was studied. The obtained surface-derivatized filaments were packed into a fused-silica capillary to evaluate its surface characteristics by using GC. As the stationary phase for GC the surface-derivatized fibers showed higher retention for alkanes and alkylbenzenes than that with the untreated Kevlar fiber. The improvements on the retention power and the peak shape were observed on the benzyl-modified fibrous stationary phase. The derivatized fibrous materials were also evaluated as the extraction medium in fiber-in-tube SPE, and the effect of the surface modification on the extraction power was compared to the parent fiber. The results indicated that the modified fiber possessed a higher extraction power than the untreated fiber. Based on the facts, the successful modification of the fiber surface was estimated.     

Influence of RNA Strand Rigidity on Polyion Complex Formation with Block Catiomers

Polyion complexes (b‐PICs) are prepared by mixing single‐ or double‐stranded oligo RNA (aniomer) with poly(ethylene glycol)‐b‐poly(l ‐lysine) (PEG‐PLL) (block catiomer) to clarify the effect of aniomer chain rigidity on association behaviors at varying concentrations. Here, a 21‐mer single‐stranded RNA (ssRNA) (persistence length: 1.0 nm) and a 21‐mer double‐stranded RNA (small interfering RNA, siRNA) (persistence length: 62 nm) are compared. Both oligo RNAs form a minimal charge‐neutralized ionomer pair with a single PEG‐PLL chain, termed unit b‐PIC (uPIC), at low concentrations (<≈0.01 mg mL⁻¹). Above the critical association concentration (≈0.01 mg mL⁻¹), ssRNA b‐PICs form secondary associates, PIC micelles, with sizes up to 30–70 nm, while no such multimolecular assembly is observed for siRNA b‐PICs. The entropy gain associated with the formation of a segregated PIC phase in the multimolecular PIC micelles may not be large enough for rigid siRNA strands to compensate with appreciably high steric repulsion derived from PEG chains. Chain rigidity appears to be a critical parameter in polyion complex association.

     

Molecular structures,electronic spectra,and aromaticity of 1,6- and 1,8-dioxa analogues of pyrene and benzo[a]pyrene. Semiempirical molecular orbital calculations

The molecular structures of [1]benzopyrano[6,5,4-def][1]benzopyran, [2]benzopyrano[7,8,1,def]-1-benzopyran, 1-benzopyrano[6,5,4-mna]xanthene, and 2-benzopyrano[7,8,1-mna]xanthene have been optimized by using the PM3 semiemperical MO method. These calculated molecules have been shown to be planar. Their aromaticity has been investigated by use of the HOMA index. The molecules are found to be less aromatic than the correspolding parednt hydrocarbons, pyrene and benzo[a]pyrene. The CNDO/S MO method has been used to interpret th experimental uv-vis specrtoscopic data. The result of the PM3, CNDO/S and HOMA-index clculations are in good arteement with the experimental data.     

PEGylated polyplex micelles from triblock catiomers with spatially ordered layering of condensed pDNA and buffering units for enhanced intracellular gene delivery

An A-B-C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa approximately 9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of approximately 6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade.