Cetylpyridinium-iodomercurate PVC membrane ion selective electrode for the determination of cetylpyridinium cation in Ezafluor mouth wash and as a detector for some potentiometric titrations

A potentiometric method is described for the determination of cetylpyridinium (CP) cation using a polyvinyl chloride powder (PVC) membrane sensor based on CP-iodomercurate ion pair as an electroactive material. The sensor shows a linear response for CP ion over the concentration range of 2x10(-6)-1x10(-3) M at 25 degrees C. The electrode posses a sub-Nernstian slope of 29.0+/-0.4 mV decade(-1), which has been thoroughly discussed.The electrode shows a fast potential response of approximately 50 s, which is almost constant over a pH range of 3.0-6.0. Selectivity coefficient data for some common ions show negligible interference, however, cetyltrimethylammonium bromide (CTMAB) interferes significantly. An average recovery of 98.8% for CP with an average relative standard deviation (R.S.D.) of 1.2% has been achieved. The determination of CPC in Ezafluor mouth wash gave result that compare favorably with those obtained by the British Pharmacopoeia method. The CP electrode has been utilized as an end point indicator electrode in potentiometric titration of some anions, and applied for the determination of anionic surfactants in some commercial detergents and waste water.     

Synthesis of 4-substituted and 3,4-disubstituted indazole derivatives by palladium-mediated cross-coupling reactions

The synthesis of 4-substituted indazole derivatives by palladium-mediated cross-coupling reactions was described. Suzuki, Heck, Sonogashira and Stille cross-coupling reactions were used to introduce aryl, vinyl and alkynyl substituents in 4-position of indazole derivatives. The selectivity of bis-Suzuki reactions of 3,4-diiodo- and 3-bromo-4-iodoindazoles was investigated.     

Synthesis,Characterization of a Novel 1,2,4‐Thiotriazine Derivative (CAMTTO), and Copper(I) and Silver(I) Complexes thereof (CAMTTO = {(4‐[(4‐Chlorobenzylidene)‐amino]‐6‐methyl‐3‐thioxo‐[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one)}

The reaction of 4‐amino‐6‐methyl‐1,2,4‐triazin‐thione‐5‐one (H₂AMTTO, 1 ) with 4‐chlorobenzaldhyde led to the corresponding iminic compound {(4‐[(4‐chloro‐benzylidene)‐amino]‐6‐methyl‐3‐thioxo[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one), CAMTTO ( 2 ). Treatment of 2 with copper(I) chloride in chloroform gave the dimeric complex [{(CAMTTO)₂CuCl}₂]·2CHCl₃ ( 3 ). Treatment of 2 with copper(I) chloride and silver(I) nitrate in the presence of the co‐ligand triphenylphophane gave the complexes [(CAMTTO)CuCl(PPh₃)₂] ( 4 ) and [(CAMTTO)Ag(PPh₃)₂]NO₃·2CHCl₃ ( 5 ). All compounds have been characterized by elemental analyses, ¹H NMR spectroscopy, IR spectroscopy, and partly by mass spectrometry and X‐ray diffraction studies. In addition 4 and 5 have been characterized by ³¹P{¹H} NMR spectroscopy. Crystal data for 2 at ?80 °C: monoclinic, space group P2₁/c, a = 1370.3(1), b = 767.8(1), c = 1268.7(1) pm, β = 107.12(1)°, Z = 4, R₁ = 0.0379; for 3 at ?80 °C: monoclinic, space group P2₁/c, a = 1442.6(2), b = 878.8(1), c = 2558.7(3) pm, β = 95.31(1)°, Z = 2, R₁ = 0.0746; for 4 at ?80 °C: triclinic, space group , a = 1287.9(1), b = 1291.7(1), c = 1359.5(1) pm, α = 90.44(1)°, β = 94.81(1)°, γ = 107.54(1)°, Z = 2, R₁ = 0.0359 and for 5 at ?80 °C: triclinic, space group , a = 1060.5(1), b = 1578.2(2), c = 1689.6(2) pm, α = 87.70(1)°, β = 86.66(1)°, γ = 76.84(1)°, Z = 2, R₁ = 0.0487.     

Heat of hydration of high reactive pozzolans in blended cements: Isothermal conduction calorimetry

A study was carried out comparing silica fume (SF) and dealuminated kaolin (DK) as pozzolanic materials in blended cements. Ten, 20 or 30 wt% of SF or DK were substituted for Portland cement. The kinetics of hydration up to 45 h were studied using isothermal conduction calorimetry. Blends containing pozzolanic materials usually have decreased heats of hydration compared to pure cement during the period of C₃S hydration, i.e. during the main hydration peak. Depending on the chemical composition and the activity of the pozzolan, the reaction taking place with the lime typically contributes to the heat output after the main hydration peak.The pozzolanic activity of DK is the principal factor and heat evolution increases with respect to pure PC mortar, during the first 15 h. The presence of hydrated silica (silanol groups) in DK increases the pozzolanic activity especially before and during induction period. The acidic silanol sites are capable of a fast acid-base reaction with the alkalis and with any Ca(OH)₂ present in cement during the induction period.     

A catalytic and mechanistic investigation of a PCP pincer palladium complex in the Stille reaction

In an improved procedure, the complex {2,6-bis[(diphenylphosphino)methyl]benzene}chloropalladium(II) (1) was synthesised as its THF adduct and the structure was determined by X-ray crystallography. The catalytic properties of the derivative {2,6-bis[(diphenylphosphino)methyl]benzene}(trifluoroacetato)palladium(II) (2) was investigated in the Stille reaction. Complex 2 proves to be an excellent catalyst for the C-C cross-coupling between trimethyl phenyl stannane and aryl bromides using a very low catalyst loading (0.1-0.0001%), giving high turnover numbers (TONs) up to 6.9 x 10(5). A kinetic investigation of the catalytic reaction suggests a heterogeneous colloidal palladium catalyst formed from the PCP Pd(II) pre-catalyst.     

Effect of catalysis on the stability of metallic nanoparticles: Suzuki reaction catalyzed by PVP-palladium nanoparticles

The small size of nanoparticles makes them attractive in catalysis due to their large surface-to-volume ratio. However, being small raises questions about their stability in the harsh chemical environment in which these nanoparticles find themselves during their catalytic function. In the present work, we studied the Suzuki reaction between phenylboronic acid and iodobenzene catalyzed by PVP-Pd nanoparticles to investigate the effect of catalysis, recycling, and the different individual chemicals on the stability and catalytic activity of the nanoparticles during this harsh reaction. The stability of the nanoparticles to the different perturbations is assessed using TEM, and the changes in the catalytic activity are assessed using HPLC analysis of the product yield. It was found that the process of refluxing the nanoparticles for 12 h during the Suzuki catalytic reaction increases the average size and the width of the distribution of the nanoparticles. This was attributed to Ostwald ripening in which the small nanoparticles dissolve to form larger nanoparticles. The kinetics of the change in the nanoparticle size during the 12 h period show that the nanoparticles increase in size during the beginning of the reaction and level off toward the end of the first cycle. When the nanoparticles are recycled for the second cycle, the average size decreases. This could be due to the larger nanoparticles aggregating and precipitating out of solution. This process could also explain the observed loss of the catalytic efficiency of the nanoparticles during the second cycle. It is also found that the addition of biphenyl to the reaction mixture results in it poisoning the active sites and giving rise to a low product yield. The addition of excess PVP stabilizer to the reaction mixture seems to lead to the stability of the nanoparticle surface and size, perhaps due to the inhibition of the Ostwald ripening process. This also decreases the catalytic efficiency of the nanoparticles due to capping of the nanoparticle surface. The addition of phenylboronic acid is found to lead to the stability of the size distribution as it binds to the particle surface through the O(-) of the OH group and acts as a stabilizer. Iodobenzene is found to have no effect and thus probably does not bind strongly to the surface during the catalytic process. These two results might have an implication on the catalytic mechanism of this reaction.     

Oxalic Acid: An Efficient and Cost-Effective Organic Catalyst for the Friedländer Quinoline Synthesis under Solvent-Free Conditions

Summary. Oxalic acid is used as an efficient catalyst in the condensation of 2-aminoaryl ketones with carbonyl compounds leading to the formation of quinolines in excellent yields under solvent-free conditions. This methodology offers significant improvements for the synthesis of quinolines with regard to the yield of products, simplicity in operation, inexpensive reagents, and green aspects by avoiding toxic catalysts and solvents.     

Sodium Borohydride – Ammonium Carbonate: An Effective Reducing System for Aldehydes and Ketones

Reduction of aldehydes and ketones to the corresponding alcohols was achieved in a simple procedure using the system sodium borohydride and ammonium carbonate. This system needs lower excesses of reducing agent and leads to significantly shortened reaction times.     

Direct determination of U(VI) in TBP-kerosene extracts using first derivative ultraviolet spectroscopy

Summary The extractive first order derivative spectrophotometry is a selective method for the separation and determination of U(VI) using tri-n-butyl phosphate (TBP), which combines the roles of solvent and complexing agent. The complex is formed by extracting U(VI) from an aqueous 6M sodium nitrate solution at initial pH 3.0 into a 25% solution of TBP in kerosene. This extraction also separates U(VI) from many diverse ions that interfere. After extraction, the determination of uranium shows good accuracy and precision with relative standard deviation of 1.5% (n = 5) at 20 ppm using zero-order spectrum at l_max = 250 nm. Calibration curve was also found to obey Beer's law in the range of 10-100 ppm with 3.33 ppm detection limit. However, these accuracy and precision have been improved to give relative standard deviation of 0.7% (n = 5) at 20 ppm with a lower detection limit of 2.24 ppm using the first-derivative spectrum at l = 263 nm comparing to the normal one.     

Liquid chromatography and chemometric-assisted spectrophotometric methods for the analysis of two multicomponent mixtures containing cough suppressant drugs

Three methods were applied for the analysis of 2 multicomponent mixtures containing dextromethorphan hydrobromide, phenylephrine hydrochloride, chlorpheniramine maleate, methylparaben, and propylparaben, together with either sodium benzoate (Mix 1) or ephedrine hydrochloride and benzoic acid (Mix 2). In the first method, liquid chromatography was used for their simultaneous determination using an ODS column with a mobile phase consisting of acetonitrile-phosphate buffer, pH 2.7 (40 + 60, v/v), containing 5mM heptanesulfonic acid sodium salt and ultraviolet (UV) detection at 214 nm. Also, 2 chemometric methods, principal component regression, and partial least squares were used. For both chemometric calibrations, a concentration set of the mixture consisting of each compound in each mixture was prepared in distilled water. The absorbance data in the UV spectra were measured for the 76 or 71 wavelength points in the spectral region 210-240 or 210-224 nm considering the intervals of deltagamma = 0.4 or 0.2 nm for Mix 1 and Mix 2, respectively. The 2 chemometric methods did not require any separation step. These methods were successfully applied for the analysis of the 2 multicomponent combinations in synthetic mixtures and in commercial syrups, and the results were compared with each other.