Optimization of cloud point extraction of copper with neocuproine from aqueous solutions using Taguchi fractional factorial design

Taguchi method was applied to optimize cloud point extraction (CPE) conditions for preconcentration and determination of trace amounts of copper by UV-Vis spectrophotometry. Briefly, the copper ions formed complexes with neocuproine in aqueous solution; then, Triton X-114 (0.15%, w/v) was added and phase separation occurred upon heating to 60°C. The copper complexes were preconcentrated into the small volume of the surfactant-rich phase; after centrifugation, the surfactant-rich phase was diluted with methanol and absorbance was measured at 455 nm. The main factors affecting the CPE were evaluated and optimized with Taguchi orthogonal array design (OA ₂₅). Under the optimum conditions, the calibration curve was linear in the range 2–500 μg/L (r ² > 0.997). The limit of detection and preconcentration factor were 1.8 μg/L and 37.2, respectively. The applicability of the proposed method was successfully confirmed by preconcentration and determination of trace amounts of copper in water samples and satisfactory results were obtained.     

Kinetic analysis of the complex process of poly(vinyl alcohol) pyrolysis using a new coupled peak deconvolution method

A peak deconvolution procedure used for the analysis of data corresponding to simultaneous overlapping processes begins with separation of individual processes using functions such as Gaussian, Lorentzian, Weibull, and Fraser–Suzuki (FS) followed by application of kinetic analysis methods to the separated peaks. We propose a coupled peak deconvolution procedure to link the parameters of the FS functions of similar peaks in two DTG curves obtained at different linear heating rates, so that the coordinates of each peak can be obtained in a constrained manner. The proposed technique is a kinetic deconvolution method rather than a pure mathematical deconvolution technique. To analyze individual peaks in our study, the non-parametric kinetic and Freidman’s isoconversional methods have been applied to determine kinetic triplet of each process. This technique has been tested with both simulated and experimental data. Using this technique, the effects of molecular weight and degree of hydrolysis of polyvinyl alcohol (PVA) samples on reaction mechanism and activation energy of thermal degradation were studied. The presence of acetate group in the PVA samples causes thermal stability, decreases the rate of main reactions, and increases the activation energy. The results of this study may help tailor heat-resistant materials with proper choice of polymer characteristics.     

Studying variations in the PCDD/PCDF profile across various food products using multivariate statistical analysis

Polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) are widely recognized by the scientific community as persistent organic pollutants due to their toxicity and adverse effects on wildlife and human health. The actual regulation dedicated to the monitoring of dioxins in food is based on the measurement of 17 congener concentrations. The final result is reported as a toxic equivalent value that takes into account the relative toxicity of each congener. This procedure can minimize the qualitative information available from the abundances of each PCDD/PCDF congener: the characteristic contamination profile of the sample. Multivariate statistical techniques, such as principal component analysis (PCA) or linear discriminant analysis (LDA), represent an interesting way to investigate this qualitative information. Nevertheless, they have only been applied to the analysis of contamination data from food products and biological matrices infrequently. The objective of the present study was to analyze a large data set from dioxin analyses performed on various food products of animal origin. The results demonstrate the existence of differences in congener-specific patterns between the analyzed samples. Variability was first demonstrated in terms of the food type (fish, meat, milk, fatty products). Then a variability was observed that was related to the specific animal species for meat and milk samples (bovine, ovine, porcine, caprine and poultry). Some practical applications of these results are discussed. The origin(s) of the observed differences, as well as their significance, now remain to be investigated, both in terms of environmental factors and transfer through living organisms. A better knowledge of the relation between a contamination profile and its specific source and/or food product should be of great interest to scientists working in the fields of contaminant analysis, toxicology and metabolism, as well as to regulatory bodies and risk assessors in charge of final decisions regarding the eventual hazards associated with theses substances.     

Selective adsorption from methanol/water mixtures by C60 fullerene nanospheres

Micro-Raman spectroscopy was used to investigate the selective adsorption of methanol/water mixtures on the surface of [60] fullerene nanospheres. C₆₀ molecules were dispersed in methanol/water mixtures with different methanol molar fractions ranging between 1 and 0.5. The Raman active pentagon pinch mode shifted significantly (±4 cm⁻¹) as the mixture composition was changed. The shift in the Raman mode was sinusoidal in nature indicating that methanol then water is adsorbed preferentially on the fullerene surface at different mixture compositions. The observed behavior is attributed to structure forming effects of alcohol/water mixtures and the shape and size effect of fullerene surface.     

氨三乙酸、缬氨酸、亮氨酸的三元过渡金属配合物：合成和生物学应用

以氨三乙酸HNTA2-为主要配体,缬氨酸(valine)或亮氨酸(leucine)为次要配体在微酸性介质中合成了Ni(Ⅱ),Cu(Ⅱ),and Zn(Ⅱ)的三元配合物。用元素分析、热分析、FTIR,UV-Vis分光光度法,磁性测量和质谱法表征了合成的三元配合物。结果表明,三元配合物可在金属(M):氨三乙酸(HNTA)∶缬氨酸(valine)或亮氨酸(leucine)=1∶1∶1时制得,其分子结构为[M(HNTA)(valine)(H2O)2].1.5H2O and[M(HNTA)(leucine)(H2O)2].1.5H2O(其中M=Ni(Ⅱ)or Cu(Ⅱ))和H2[Zn(NTA)(valine)(H2O)]H2O。标题三元过渡金属配合物为八面体对称构型。同时研究了该三元配合物对大肠杆菌,金黄色葡萄球菌,白色念珠菌,黄曲霉菌(菌株从开罗大学理学院微分析中心获得)的抗菌活性。根据推荐的知名方法用标准的抗菌和抗真菌剂进行体外测试(in vitro)以评估我们的新制备的配合物对细菌和真菌物种的生长抑制活性。     

The impact of protonation and deprotonation of 3-methyl-2'-deoxyadenosine on N-glycosidic bond cleavage

The enzyme-substrate contacts that are believed to be involved in depurination by proton transfer have been modelled by protonation and deprotonation of 3-methyl-2'-deoxyadenosine (3-MDA) using quantum mechanical calculations in the gas-phase and solution media. The change in the charge distribution on the sugar ring and nucleobase that is introduced by the protonation and deprotonation strongly affects the N-glycosidic bond length. The unimolecular cleavage and hydrolysis of the N-glycosidic bond, involving D(N)*A(N) and A(N)D(N) pathways, have been considered at several levels of theory. The trend in the energy barriers is A(N)D(N) > cleavage > D(N)*A(N). All probable proton transfer reactions resulting from enzyme-substrate contacts do not facilitate the N-glycosidic bond cleavage of 3-MDA. The deprotonation of 3-MDA that may result from the interaction between H6 and enzyme do not facilitate bond cleavage. The protonation at N7 induces more positive charge on the sugar ring and further facilitates the depurination relative to the protonation at N1. The changes in the charges calculated on the ribose and nucleobase are in good relationship with the C1'-C2', C1'-O4', and N-glycosidic bond lengths along the cleavage. The change in energy barrier ΔE of glycosidic bond cleavage from the gas-phase to solution media strongly depends on the charge of the species.     

A supramolecular spin crossover Fe(III) complex and its Cr(III) isomer: stabilization of water-chloride cluster within supramolecular host

The metal complexes, [M(Hdammthiol)(2)]Cl·3H(2)O [M = Cr(III) (1), Fe(III) (2)] [where H(2)dammthiol is the thiol form of the ligand, diacetylmonoxime morpholine N-thiohydrazone] were synthesized by metal template reactions of diacetylemonoxime with morpholine N-thiohydrazide in the presence of CrCl(3)·6H(2)O and FeCl(3)·6H(2)O. Both the complexes (1 and 2) were characterized by single crystal X-ray crystallography, spectroscopic (IR and UV-vis), M?ssbauer and TGA analyses. The single crystal X-ray studies of both complexes show that the supramolecular hosts, constructed by the discrete mononuclear complexes, form supramolecular channels along the c-axis which are filled up by water-chloride clusters. In both complexes, the 1D water-chloride chain with chair-like architecture within the supramolecular hosts presents novelty. The magnetic measurement study of Fe(III) complex shows a spin crossover from S = 1/2 at 2.5 K to S = 5/2 at 300 K. At very low temperature, the presence of strong cooperative hydrogen bonding interactions stabilizes the S = 1/2 state.     

Beating cancer in multiple ways using nanogold

Gold nanoparticles possess a unique combination of properties which allow them to act as highly multifunctional anti-cancer agents (X. H. Huang, P. K. Jain, I. H. El-Sayed and M. A. El-Sayed, Nanomedicine, 2007, 2, 681-693; P. Ghosh, G. Han, M. De, C. K. Kim and V. M. Rotello, Adv. Drug Delivery Rev., 2008, 60, 1307-1315; S. Lal, S. E. Clare and N. J. Halas, Acc. Chem. Res., 2008, 41, 1842-1851; D. A. Giljohann, D. S. Seferos, W. L. Daniel, M. D. Massich, P. C. Patel and C. A. Mirkin, Angew. Chem., Int. Ed., 2010, 49, 3280-3294). Not only can they be used as targeted contrast agents for photothermal cancer therapy, they can serve as scaffolds for increasingly potent cancer drug delivery, as transfection agents for selective gene therapy, and as intrinsic antineoplastic agents. This tutorial review will highlight some of the many forms and recent applications of these gold nanoparticle conjugates by our lab and others, as well as their rational design and physiologic interactions.