Transient creep during transformation in Cd-Zn alloys

Transient creep of Cd-2 wt. % Zn and Cd-17·4 wt. % Zn alloys has been studied under different constant stresses ranging from 6·4 MPa to 12·7 MPa near the transformation temperature. The results of both compositions showed two transient deformation regions, the low temperature region (below 483 K) and the high temperature region (above 483 K). From the transient creep described by the equation _tr=Bt ⁿ, where _tr andt are the transient creep strain and time. The parametersB andn were calculated. The parameterB was found to change with the applied stress from 0·3×10^–4 to 3×10^–4 and from 0·6×10^–4 to 18×10^–4 for Cd-2 wt. % Zn and Cd-17·4 wt. % Zn, respectively. The exponentn was found to change from 0·8 to 0·95 for both alloys. The parameterB was related to the steady state creep rate through the equation , the exponent was found to be 0·5 for Cd-2 wt. % Zn and 0·6 for the eutectic composition. The activation energies of transient creep in the vicinity of the transformation regions (above 483 K) were found to be 50·2 kJ/mole for Cd-2 wt. % Zn and 104·7 kJ/mole for the eutectic composition characterizing the mechanisms of grain boundary diffusion and volume diffusion in Cd, respectively.     

New Group 6 metal carbonyl derivatives of 2-(2'(-pyridyl)benzimidazole: synthesis and spectroscopic studies

Reaction of Cr(CO)(6) with 2-(2'-pyridyl)benzimidazole (pbiH) under reduced pressure resulted in the formation of the dinuclear complex [Cr(2)(CO)(6)(pbiH)(2)]. Infra-red (IR) spectroscopy revealed the presence of terminal and bridge Cr-CO bonds. Interaction of M(CO)(6), M=Cr, Mo and W, with pbiH in the presence of 2,2'-bipyridine (bpy) gave the tetracarbonyl complexes [M(CO)(4)(pbiH)].bpy. Spectroscopic studies of the complexes indicated the presence of hydrogen bonding between the bpy nitrogen and the NH group of pbiH. Reactions of M(CO)(6) with pbiH in the presence of PPh(3) gave the tricarbonyl monosubstituted derivatives [M(CO)(3)(PPh(3))(pbiH)]. The spectroscopic studies of the complexes suggested the proposed structures.     

Reaction of some coumarin and 4,6-diaryl-2H-pyran derivatives with secondary amines

The reaction of piperidine, morpholine, piperazine or dimethylamine with several coumarins, 3-bromocoumarin, 4,6-diaryl-2H-pyran-2-ones and 3-bromo-4,6-diaryl-2H-thiopyran-2-ones gave o-hydroxycinnamic acid amides, benzofurans, open-chain δ-oxoamides and thiophene derivatives, respectively.     

Partial dehydration of the retinal binding pocket and proof for photochemical deprotonation of the retinal Schiff base in bicelle bacteriorhodopsin crystals

In bicelle bacteriorhodopsin (bcbR) crystals, the protein has a different structure from both native bacteriorhodopsin (bR) and in-cubo bR (cbR) crystals. Recently, we studied the ability of bcbR crystals to undergo the photocycle upon laser excitation, characterized by the appearance of the M intermediate by single crystal resonance Raman spectroscopy. Calculation of the M lifetime by flash photolysis experiments demonstrated that in our bcbR crystals, the M rise time is much faster than in the native or cbR crystals, with a decay time that is much slower than these other two forms. Although it is now known that the bcbR crystals are capable of photochemical deprotonation, it is not known whether photochemical deprotonation is the only way to create the deprotonated Schiff base in the bcbR crystals. We measured both the visible and Raman spectra of crystals dried under ambient lighting and dried in the dark in order to determine whether the retinal Schiff base is able to thermally deprotonate in the dark. In addition, changes in the visible spectrum of single bcbR crystals under varying degrees of hydration and light exposure were examined to better understand the retinal binding environment.     

Determination of association constants between enantiomers of orciprenaline and methyl-beta-cyclodextrin as chiral selector by capillary zone electrophoresis using a partial filling technique

The principles for the determination of conditional association constants of enantiomers by capillary zone electrophoresis employing a partial filling technique (PFT) using methyl-beta-cyclodextrin as chiral selector is presented. Orciprenaline was used as a model compound. Partial filling is a separation technique, where different lengths of the chiral selector solution are introduced into the capillary to a final zone length shorter than the effective length of the capillary, prior to application of the solutes. Lengthening of the separation zone results in improving enantioresolution in addition to decreasing electrophoretic mobility of the enantiomers, because of longer interaction time between the solute and chiral selector. The degree of the reduction in electromobility depends on the affinity of the solute to the chiral selector, i.e. strength of the complex formed between the solute and cyclodextrin. The decrease in the electrophoretic mobility with increasing length of the separation zone is used for determination of the association constant. The association constants of the enantiomers of orciprenaline and the chiral selector were evaluated from the slope of the plot, observed electrophoretic mobility versus the ratio between the length of the separation zone and the effective length of the capillary. It was found that the association constants were independent of the chiral selector concentration. The mean values were 110 M(-1) and 160 M(-1) for respective enantiomer. Constants obtained by a conventional CE technique were in good agreement with those from the PFT experiments. The highest enantioselectivityy was obtained when about 50% of the solute was distributed to the selector phase.     

Selective adsorption from methanol/water mixtures by C60 fullerene nanospheres

Micro-Raman spectroscopy was used to investigate the selective adsorption of methanol/water mixtures on the surface of [60] fullerene nanospheres. C₆₀ molecules were dispersed in methanol/water mixtures with different methanol molar fractions ranging between 1 and 0.5. The Raman active pentagon pinch mode shifted significantly (±4 cm⁻¹) as the mixture composition was changed. The shift in the Raman mode was sinusoidal in nature indicating that methanol then water is adsorbed preferentially on the fullerene surface at different mixture compositions. The observed behavior is attributed to structure forming effects of alcohol/water mixtures and the shape and size effect of fullerene surface.     

Spectrophotometric determination of molybdenum with phenylfluorone

Spectrophotometric studies on the reaction between molybdenum as molybdate (MoO₄^2?) and phenylfluorone are presented. The reaction conditions are optimized to develop an intense color (molar absorptivity is 3.8 × 10³) selective and sensitive for the Spectrophotometric determination of molybdenum. The absorbance is measured at 560 nm, at a pH of 1.5–3. The colored complex is stable for up to 24 hr, Beer's law is obeyed, over the concentration range of 1 to 4 μg/25 ml. The relative standard deviation is 2% and the sensitivity of the method is 1.60 × 10^?4 mg/ml.     

Structural Elucidation of {[(CH3)2SnCl2·H2O]2·18-crown-6} n and its Hydrogen Bonding in Solution by HMBC Spectroscopy

Behavior of {[(CH₃)₂SnCl₂·H₂O]₂·18-crown-6}_n in solution have been investigated by HMBC NMR. The results show that coordination of water to tin containing species and its hydrogen bonding to crown ether remains intact in non-coordinating solvent in contrast to coordinating solvent. H-NMR reveals that the chemical shift of water in complex varies by solvent of crystallization.     

NMR study of the stoichiometry,stability and exchange kinetics of complexation reaction between Pb2+ ion and 18-crown-6 in binary acetonitrile-water mixtures

Proton NMR was used to study the complexation reaction between lead ion and 18-crown-6 in a number of binary acetonitrile-water mixtures. Formation constant for the resulting 11 complexes in different solvent mixtures was determined by computer fitting of the chemical shift-mole ratio data. There is an inverse relationship between the complex stability and amount of water in the mixed solvent. The dissociative kinetics of the complex was studied by proton line-shape analysis. The Arrhenius plots showed a distinct isokinetic temperature at about 25°C at which the decomplexation rate is more or less independent of the solvent composition. the complexation rate and the activation parameters E _a , H and S, for the exchange have been determined and found to be strongly solvent dependent. There is actually a linear relationship between the mole fraction of acetonitrile in the mixed solvent and logarithm of the stability constant as well as activation parameters.     

Conversion of sugarcane bagasse to carboxylic acids using a mixed culture of mesophilic microorganisms

Using the MixAlco process, biomass can be converted into carboxylic acids, which can be chemically converted into mixed alcohol fuels. This study focused on the use of countercurrent fermentation to anaerobically convert sugarcane bagasse and chicken manure to mixed carboxylic acids using a mixed culture of mesophilic microorganisms from terrestrial and marine sources. Bagasse was pretreated with lime to increase digestibility. The continuum particle distribution model (CPDM) simulated continuous fermentors based on data collected from batch experiments. This model saves considerable time in determining optimum operating conditions. For an 80% bagasse/20% chicken manure fermentation with terrestrial inoculum at a volatile solids loading rate (VSLR) of 7.36 g/(L of liquid·d) and a liquid residence time (LRT) of 8.88 d, total carboxylic acid productivity, total acid selectivity, and yield were 2.49 g/(L of liquid·d), 0.581 g of total acid/g of VS digested, and 0.338 g of total acid/g of VS fed, respectively, at a concentration of 18.7 g of total acid/L. At the same VSLR and LRT, fermentation with marine inoculum gave higher total acid productivity, total acid selectivity, and yield than fermentation with terrestrial inoculum. For an 80% bagasse/20% chicken manure fermentation with marine inoculum at a VSLR of 3.83 g/(L of liquid·d) and an LRT of 12.1 d, total carboxylic acid productivity, total acid selectivity, and yield were 1.38 g/(L of liquid·d), 0.667 g of total acid/g of VS digested, and 0.359 g of total acid/g of VS fed, respectively, at a concentration of 16.2 g of total acid/L.