Analysis of xylene in aqueous media using needle‐trap microextraction with a carbon nanotube sorbent

This paper describes a new extraction technique with needles and a sorbent based on carbon nanotubes to analyze trace amounts of three isomers of xylenes in aqueous samples. In this research, results have been compared with one commercial sorbent. The synthesized sorbent was prepared using sol–gel technology and was packed into 20 gauge needles, and the same size needle was used for packing the commercial sorbent. In the extraction process, a purge and trap sampling methodology is developed, so purging and trapping cycles were performed by a sampling pump. Optimized conditions for standard xylene samples have been obtained, and eight urine samples from workers that were exposed to xylene in the workplace were collected and analyzed. Experimental parameters such as limits of detection and quantification were investigated, and these two parameters were <1 μg/L.     

Energy,exergy, and sensitivity analyses of a new integrated system for generation of liquid methanol,liquefied natural gas,and crude helium using organic Rankine cycle,and solar collectors

Journal of Thermal Analysis and Calorimetry - The increasing growth of helium consumption in industries and the limited resources of this element are the challenges that industries will face in the...     

Applications of intelligent methods in various types of heat exchangers: a review

Journal of Thermal Analysis and Calorimetry - Heat exchangers are applicable in different industries and technologies, and their performance is influenced by different parameters. In addition to...     

A renewable approach to capture CO2 in Iran: thermodynamic and exergy analyses

Journal of Thermal Analysis and Calorimetry - This work presents numerical simulation of two-dimensional thermogravitational energy transport in a chamber filled with copper–water ( $${\hbox...     

A comparative study of the adsorption equilibrium of progesterone by a carbon black and a commercial activated carbon

In this paper the adsorption process of a natural steroid hormone (progesterone) by a carbon black and a commercial activated carbon has been studied. The corresponding equilibrium isotherms have been analyzed according to a previously proposed model which establishes a kinetic law satisfactorily fitting the C versus t isotherms. The analysis of the experimental data points out the existence of two well-defined sections in the equilibrium isotherms. A general equation including these two processes has been proposed, the global adsorption process being fitted to such equation. From the values of the kinetic equilibrium constant so obtained, values of standard average adsorption enthalpy () and entropy () have been calculated. Finally, information related to variations of differential adsorption enthalpy () and entropy () with the surface coverage fraction (θ) was obtained by using the corresponding Clausius-Clapeyron equations.     

Kinetic analysis of the complex process of poly(vinyl alcohol) pyrolysis using a new coupled peak deconvolution method

A peak deconvolution procedure used for the analysis of data corresponding to simultaneous overlapping processes begins with separation of individual processes using functions such as Gaussian, Lorentzian, Weibull, and Fraser–Suzuki (FS) followed by application of kinetic analysis methods to the separated peaks. We propose a coupled peak deconvolution procedure to link the parameters of the FS functions of similar peaks in two DTG curves obtained at different linear heating rates, so that the coordinates of each peak can be obtained in a constrained manner. The proposed technique is a kinetic deconvolution method rather than a pure mathematical deconvolution technique. To analyze individual peaks in our study, the non-parametric kinetic and Freidman’s isoconversional methods have been applied to determine kinetic triplet of each process. This technique has been tested with both simulated and experimental data. Using this technique, the effects of molecular weight and degree of hydrolysis of polyvinyl alcohol (PVA) samples on reaction mechanism and activation energy of thermal degradation were studied. The presence of acetate group in the PVA samples causes thermal stability, decreases the rate of main reactions, and increases the activation energy. The results of this study may help tailor heat-resistant materials with proper choice of polymer characteristics.     

Characterization and High Level Expression of Acidic Endoglucanase in Pichia pastoris

Bioconversion of cellulosic material into glucose needs cellulase enzymes. One of the most important organisms that produces cellulases is Trichoderma reesei, whose cellulose enzymes are probably the most widely used in the industry. However, these enzymes are not stable enough at high pH and temperatures. The optimized synthetic endoglucanase II gene with Pichia pastoris codon preferences was secretary expressed in P. pastoris. Recombinant enzyme characterization showed maximum activity at pH 4.8 and temperature 75 °C, and it demonstrated increasing thermal stability in high temperature. The enzyme maintained its activity in a wide pH range from 3.5 to 6.5. The optimization of fermentation medium was carried out in shaking flasks. Recombinant protein expression at optimum conditions (pH 7, temperature 25 °C, and 1 % methanol induction) for 72 h demonstrated 2,358.8 U/ml endoglucanase activity units. To our knowledge, this is the highest acidic thermophilic endoglucanase activity that is reported in crude intracellular medium in P. pastoris. We conclude that P. pastoris is an appropriate host for high-level expression of optimized endoglucanase gene with improved thermal stability.     

Potassium phthalimide-catalysed one-pot multi-component reaction for efficient synthesis of amino-benzochromenes in aqueous media

2-Amino-4-aryl-4H-benzo[h]chromenes and 3-amino-1-aryl-1H-benzo[f]chromenes were prepared by treating cyano-methylene compounds (malononitrile or ethyl cyanoacetate), substituted aromatic aldehydes, and naphtholic compounds in the presence of potassium phthalimide as a green, mild, efficient, and commercially available organocatalyst in aqueous media. The procedure was readily conducted and affords remarkable advantages such as safety, short reaction times, environmentally benign milder reaction conditions, no organic solvent required, and high yields.     

Exo/endo stereocontrolled synthesis of spiroindoloindolizidines by using classical and microwave conditions via the 1,3-dipolar cycloaddition reaction

Using both classical reflux and microwave-mediated conditions, a series of new spiroindoloindolizidines was synthesized by multicomponent 1,3-dipolar cycloaddition of azomethine ylides in unprecedented exo/endo stereocontrolled. Both conditions easily afforded two identical and separable exo/endo diastereomeric ratios of cycloadducts. However, the ratio of two diastereomeric products obtained from conventional conditions was reversed in all examined cases when the reactions were explored under microwave-mediated conditions. As expected, utilizing the microwave-assisted conditions produced higher yields and reaction rates compared to classical conditions. The structure and exact stereochemistry of synthesized cycloadducts were determined by applying various 2D-NMR spectroscopic techniques and single-crystal X-ray diffraction. Finally, the mechanism of the reaction has been briefly investigated by using density functional theory (DFT) calculations.     

Synthesis and Characterization of an α-Fe2O3-Decorated g-C3N4 Heterostructure for the Photocatalytic Removal of MO

This study describes the preparation of graphitic carbon nitride (g-C₃N₄), hematite (α-Fe₂O₃), and their g-C₃N₄/α-Fe₂O₃ heterostructure for the photocatalytic removal of methyl orange (MO) under visible light illumination. The facile hydrothermal approach was utilized for the preparation of the nanomaterials. Powder X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), and Brunauer–Emmett–Teller (BET) were carried out to study the physiochemical and optoelectronic properties of all the synthesized photocatalysts. Based on the X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance (DRS) results, an energy level diagram vs. SHE was established. The acquired results indicated that the nanocomposite exhibited a type-II heterojunction and degraded the MO dye by 97%. The degradation ability of the nanocomposite was higher than that of pristine g-C₃N₄ (41%) and α-Fe₂O₃ (30%) photocatalysts under 300 min of light irradiation. The formation of a type-II heterostructure with desirable band alignment and band edge positions for efficient interfacial charge carrier separation along with a larger specific surface area was collectively responsible for the higher photocatalytic efficiency of the g-C₃N₄/α-Fe₂O₃ nanocomposite. The mechanism of the nanocomposite was also studied through results obtained from UV-vis and XPS analyses. A reactive species trapping experiment confirmed the involvement of the superoxide radical anion (O₂^•−) as the key reactive oxygen species for MO removal. The degradation kinetics were also monitored, and the reaction was observed to be pseudo-first order. Moreover, the sustainability of the photocatalyst was also investigated.