Cetylpyridinium-iodomercurate PVC membrane ion selective electrode for the determination of cetylpyridinium cation in Ezafluor mouth wash and as a detector for some potentiometric titrations

A potentiometric method is described for the determination of cetylpyridinium (CP) cation using a polyvinyl chloride powder (PVC) membrane sensor based on CP-iodomercurate ion pair as an electroactive material. The sensor shows a linear response for CP ion over the concentration range of 2x10(-6)-1x10(-3) M at 25 degrees C. The electrode posses a sub-Nernstian slope of 29.0+/-0.4 mV decade(-1), which has been thoroughly discussed.The electrode shows a fast potential response of approximately 50 s, which is almost constant over a pH range of 3.0-6.0. Selectivity coefficient data for some common ions show negligible interference, however, cetyltrimethylammonium bromide (CTMAB) interferes significantly. An average recovery of 98.8% for CP with an average relative standard deviation (R.S.D.) of 1.2% has been achieved. The determination of CPC in Ezafluor mouth wash gave result that compare favorably with those obtained by the British Pharmacopoeia method. The CP electrode has been utilized as an end point indicator electrode in potentiometric titration of some anions, and applied for the determination of anionic surfactants in some commercial detergents and waste water.     

Magneto-structural xorrelations in 2D and 3D extended structures of manganese(II)-malonate systems

Two polymeric malonato-bridged manganese(II) complexes of formula [Mn(mal)(H(2)O)(2)](n)() (1) and [Mn(2)(mal)(2)(4,4'-bipy)(H(2)O)(2)](n)() (2) have been synthesized and characterized (mal = malonate dianion; 4,4'-bipy = 4,4'-bipyridine). The crystal structure of complex 1 was already known. Complex 2 crystallizes in monoclinic space group P2(1)/n, Z = 2, with unit cell parameters of a = 7.2974(10) A, b = 18.7715(10) A, c = 7.514(3) A, and beta = 91.743(12) degrees. The structure determination reveals that the complex [Mn(2)(mal)(2)(4,4'-bipy)(H(2)O)(2)](n)() (2) is a 3D network being composed of Mn-malonate sheets which are pillared by bidentate 4,4'-bipy spacer forming small voids. The Mn-Mn distances through Mn-mu-(O3-C8-O4)-Mn, Mn-mu(O1-C6-O2)-Mn, and Mn-mu-4,4'-bipy-Mn bridges are 5.561, 5.410, and 11.723 A, respectively. The magnetic behaviors of complexes 1 and 2 in the temperature range 300-2 K are very close, corresponding to a weak antiferromagnetic coupling. The magnetic pathways of complex 1 are through two Mn-O-C-O-Mn with anti-anti conformation and two Mn-O-C-O-Mn with syn-anti conformations and in complex 2 through all Mn-O-C-O-Mn with syn-anti conformations. Both syn-anti and anti-anti conformations create weak antiferromagnetic coupling, and the susceptibility data are fitted by the expansion series of Lines and the Curély formula for an S = 5/2 antiferromagnetic quadratic layer, based on the exchange Hamiltonian H = -Sigma(nn)()JS(i)()S(j)(). The best fit is given by the superexchange parameters J = -0.32 cm(-)(1) and g = 2.00 for complex 1 and J = -0.14 cm(-)(1), J(inter) = -0.031 cm(-)(1), and g = 2.00 for complex 2. Finally, in both the complexes there is a magnetic pathway Mn-O-C-C-C-O-Mn, and this pathway through the three carbon atoms of the malonato-bridging ligand could be considered negligible.     

Direct determination of U(VI) in TBP-kerosene extracts using first derivative ultraviolet spectroscopy

Summary The extractive first order derivative spectrophotometry is a selective method for the separation and determination of U(VI) using tri-n-butyl phosphate (TBP), which combines the roles of solvent and complexing agent. The complex is formed by extracting U(VI) from an aqueous 6M sodium nitrate solution at initial pH 3.0 into a 25% solution of TBP in kerosene. This extraction also separates U(VI) from many diverse ions that interfere. After extraction, the determination of uranium shows good accuracy and precision with relative standard deviation of 1.5% (n = 5) at 20 ppm using zero-order spectrum at l_max = 250 nm. Calibration curve was also found to obey Beer's law in the range of 10-100 ppm with 3.33 ppm detection limit. However, these accuracy and precision have been improved to give relative standard deviation of 0.7% (n = 5) at 20 ppm with a lower detection limit of 2.24 ppm using the first-derivative spectrum at l = 263 nm comparing to the normal one.     

Synthesis of 4-substituted and 3,4-disubstituted indazole derivatives by palladium-mediated cross-coupling reactions

The synthesis of 4-substituted indazole derivatives by palladium-mediated cross-coupling reactions was described. Suzuki, Heck, Sonogashira and Stille cross-coupling reactions were used to introduce aryl, vinyl and alkynyl substituents in 4-position of indazole derivatives. The selectivity of bis-Suzuki reactions of 3,4-diiodo- and 3-bromo-4-iodoindazoles was investigated.     

Synthesis,Characterization of a Novel 1,2,4‐Thiotriazine Derivative (CAMTTO), and Copper(I) and Silver(I) Complexes thereof (CAMTTO = {(4‐[(4‐Chlorobenzylidene)‐amino]‐6‐methyl‐3‐thioxo‐[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one)}

The reaction of 4‐amino‐6‐methyl‐1,2,4‐triazin‐thione‐5‐one (H₂AMTTO, 1 ) with 4‐chlorobenzaldhyde led to the corresponding iminic compound {(4‐[(4‐chloro‐benzylidene)‐amino]‐6‐methyl‐3‐thioxo[1,2,4]‐triazin‐3,4‐dihydro(2H)‐5‐one), CAMTTO ( 2 ). Treatment of 2 with copper(I) chloride in chloroform gave the dimeric complex [{(CAMTTO)₂CuCl}₂]·2CHCl₃ ( 3 ). Treatment of 2 with copper(I) chloride and silver(I) nitrate in the presence of the co‐ligand triphenylphophane gave the complexes [(CAMTTO)CuCl(PPh₃)₂] ( 4 ) and [(CAMTTO)Ag(PPh₃)₂]NO₃·2CHCl₃ ( 5 ). All compounds have been characterized by elemental analyses, ¹H NMR spectroscopy, IR spectroscopy, and partly by mass spectrometry and X‐ray diffraction studies. In addition 4 and 5 have been characterized by ³¹P{¹H} NMR spectroscopy. Crystal data for 2 at ?80 °C: monoclinic, space group P2₁/c, a = 1370.3(1), b = 767.8(1), c = 1268.7(1) pm, β = 107.12(1)°, Z = 4, R₁ = 0.0379; for 3 at ?80 °C: monoclinic, space group P2₁/c, a = 1442.6(2), b = 878.8(1), c = 2558.7(3) pm, β = 95.31(1)°, Z = 2, R₁ = 0.0746; for 4 at ?80 °C: triclinic, space group , a = 1287.9(1), b = 1291.7(1), c = 1359.5(1) pm, α = 90.44(1)°, β = 94.81(1)°, γ = 107.54(1)°, Z = 2, R₁ = 0.0359 and for 5 at ?80 °C: triclinic, space group , a = 1060.5(1), b = 1578.2(2), c = 1689.6(2) pm, α = 87.70(1)°, β = 86.66(1)°, γ = 76.84(1)°, Z = 2, R₁ = 0.0487.     

Heat of hydration of high reactive pozzolans in blended cements: Isothermal conduction calorimetry

A study was carried out comparing silica fume (SF) and dealuminated kaolin (DK) as pozzolanic materials in blended cements. Ten, 20 or 30 wt% of SF or DK were substituted for Portland cement. The kinetics of hydration up to 45 h were studied using isothermal conduction calorimetry. Blends containing pozzolanic materials usually have decreased heats of hydration compared to pure cement during the period of C₃S hydration, i.e. during the main hydration peak. Depending on the chemical composition and the activity of the pozzolan, the reaction taking place with the lime typically contributes to the heat output after the main hydration peak.The pozzolanic activity of DK is the principal factor and heat evolution increases with respect to pure PC mortar, during the first 15 h. The presence of hydrated silica (silanol groups) in DK increases the pozzolanic activity especially before and during induction period. The acidic silanol sites are capable of a fast acid-base reaction with the alkalis and with any Ca(OH)₂ present in cement during the induction period.     

Polymeric networks of copper(II) using succinate and aromatic N-N donor ligands: synthesis, crystal structure, magnetic behaviour and the effect of weak interactions on their crystal packing

Four succinato-bridged complexes of copper(II) have been synthesized. Complex 1, [Cu(2)(mu-OH(2))(2)L(bpy)(2)(NO(3))(2)](n) and 2, [Cu(2)(mu-OH(2))(2)L(phen)(2)(NO(3))(2)](n)(bpy = 2,2[prime or minute]-bipyridine; phen = 1,10-phenanthroline and LH(2)= succinic acid) exhibit 1D coordination polymer structures where both the nitrate ions are directly linked to the copper(ii) producing synthons in a 2D sheet. A novel 2D grid-like network, ([Cu(4)L(2)(bpy)(4)(H(2)O)(2)](ClO(4))(4)(H(2)O))n3, is obtained upon changing the nitrate by perchlorate anion in complex 1, where the channels are occupied by the anions. On changing the nitrate by tetrafluoroborate anion in complex 2, a novel octanuclear complex, [Cu(8)L(4)(phen)(12)](BF(4))(8).8H(2)O 4, is isolated. The coligand bpy and phen in these complexes show face-to-face (in 1,2,3,4) or edge-to-face (in 4 )pi-pi interactions forming the multidimensional supramolecular architectures. Interestingly, the appearance of edge-to-face pi-pi interactions in complex facilitates the formation of discrete octanuclear entities. Variable-temperature (300-2 K) magnetic measurements of complexes have been done. Complexes 1 and 2 show very weak antiferromagnetic (OOC-CH(2)-CH(2)-COO) and ferromagnetic coupling (mu-H(2)O). Complex 3 also shows antiferromagnetic (syn-syn mu-OCO), and ferromagnetic coupling (mu-O of the -COO group). Complex 4 with two types (syn-syn and syn-anti) of binding modes of the carboxylate group shows strong antiferromagnetic interaction.     

New triiodomercurate-modified carbon paste electrode for the potentiometric determination of mercury

A new tetrazolium-triiodomercurate-modified carbon paste electrode has been described for the sensitive and selective determination of mercury. The electrode shows a stable, near-Nernstian response for 1×10⁻³ to 6×10⁻⁶ M [HgI₃]⁻ at 25 °C over the pH range of 4.0-9.0, with an anionic slope of 55.5±0.4 mV. The lower detection limit is 4×10⁻⁶ M with a fast response time of 30-50 s. Selectivity coefficients of a number of interfering anions and iodo complexes of some metal ions have been estimated. The interference from many of the investigated ions is negligible. The determination of 1-200 μg/ml of mercury in aqueous solutions shows an average recovery of 98.5% and a mean relative standard deviation of 1.6% at 50.0 μg/ml. The direct determination of mercury in spiked wastewater, metal amalgams and dental alloy gave results that compare favorably with those obtained by the cold vapor atomic absorption spectrometric method. Potentiometric titration of mercury and phenylmercury acetate with standard potassium iodide has been monitored using the developed triiodomercurate-carbon paste electrode (CPE) as an end point indicator electrode.     

Selectivity of bacterial ionophore monensin for monovalent metal cations. Solvent effects in methanol and biphasic water-organic systems

Interactions of ionophore monensin with heavy metal monovalent cations, Ag⁺, Tl⁺, Hg ₂ ²⁺ , were studied in methanol and in various biphasic waterorganic solvent systems to supplement previous data on alkali-metal cations. The species formed were identified and the corresponding formation constants determined. Enthalpies of formation were also obtained in methanol for Ag⁺ and Tl⁺ from calorimetric measurements. The results for monovalent cations in general are discussed in terms of cation size and solvation, and structure of the ionophore anion.     

DNA-Binding Capabilities and Anticancer Activities of Ruthenium(II) Cymene Complexes with (Poly)cyclic Aromatic Diamine Ligands

Ruthenium(II) arene complexes of the general formula [RuCl(η⁶-p-cymene)(diamine)]PF₆ (diamine = 1,2-diaminobenzene (1), 2,3-diaminonaphthalene (2), 9,10-diaminophenanthrene (3), 2,3-diaminophenazine (4), and 1,2-diaminoanthraquinone (5) were synthesized. Chloro/aqua exchange was evaluated experimentally for complexes 1 and 2. The exchange process was investigated theoretically for all complexes, revealing relatively fast exchange with no significant influence from the polycyclic aromatic diamines. The calf thymus DNA (CT-DNA) binding of the complexes increased dramatically upon extending the aromatic component of the diamines, as evaluated by changes in absorption spectra upon titration with different concentrations of CT-DNA. An intercalation binding mode was established for the complexes using the increase in the relative viscosity of the CT-DNA following addition of complexes 1 and 2. Theoretical studies showed strong preference for replacement of water by guanine for all the complexes, and relatively strong Ru–N_guanine bonds. The plane of the aromatic systems can assume angles that support non-classical interactions with the DNA and covalent binding, leading to higher binding affinities. The ruthenium arenes illustrated in this study have promising anticancer activities, with the half maximal inhibitory concentration (IC₅₀) values comparable to or better than cisplatin against three cell lines.