Dispersion compensation in optical transmission systems using high negative dispersion chalcogenide/silica hybrid microstructured optical fiber

In this paper, a new hybrid microstructured optical fiber (H-MOF) based upon photonic bandgap (PBG) light guiding mechanism which can be used for dispersion compensation in optical transmission systems is designed and simulated. The H-MOF core is made up of silica glass and the holes in the cladding network are filled with As₂Se₃ chalcogenide glass. By selecting an appropriate geometrical parameters for the structure, the dispersion and confinement losses of the proposed H-MOF at 1.55 µm are calculated to be ?6700 ps/nm/km and 6?×?10^?4 dB/m, respectively. Relative dispersion slope (RDS) of the H-MOF at 1.55 µm is about 0.00347 nm^?1. The proposed H-MOF is suitable for use in wavelength division multiplexing and dispersion compensating systems in optical fiber transmission networks.     

Explosive and solitary excitations in a very dense magnetoplasma

A two-component dense magnetoplasma consisting of ions and degenerate electrons is considered. The basic set of hydrodynamic and Poisson equations are reduced to the Zakharov-Kuznetsov (ZK) equation by using the reductive perturbation technique. The basic features of the electrostatic excitations are investigated by applying a new direct method to the ZK equation. It is found that the latter has new solutions, which admit the propagation of either solitary or explosive pulses. The relevance of the new direct method to other nonlinear partial differential equations is also discussed.     

Flame atomic absorption spectrometric determination of trace amounts of nickel after extraction and preconcentration onto natural modified analcime zeolite loaded with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Nickel is a moderately toxic element compared with other transition metals. However, inhalation of nickel and its compounds leads to serious problems, including cancer of the respiratory system and a skin disorder, nickel-eczema. Thus, attention has focused on the toxicity of nickel at low concentrations, and the development of reliable, analytical approaches for the determination of trace amounts of nickel is needed. This paper describes a simple, rapid, and sensitive flame atomic absorption spectrometric method for the determination of trace amounts of nickel in various samples after adsorption of its 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex on a modified Analcime column in the pH range of 7.5-10.5. The retained analyte on the Analcime is recovered with 5.0 mL 2 M nitric acid and determined by flame atomic absorption spectrometry. The detection limit is 20 ng/mL, and the calibration curve is linear for analyte concentrations in the range of 0.1-8 microg/mL final solution, with a correlation coefficient of 0.9993. Eight replicate determinations of nickel at 2 microg/mL in the final solution gave an absorbance of 0.1222, with a relative standard deviation (RSD) of +/-1.2%. The interference of a large number of anions and cations was studied, and the proposed method was used for the determination of nickel in various standard reference samples. The accuracy of the proposed method was evaluated by analyzing standard reference samples, and the results were satisfactory (recoveries of >96%; RSD of <3.5%).     

Chemically assisted directed assembly of carbon nanotubes for the fabrication of large-scale device arrays

We report the directed assembly of single-walled carbon nanotubes (SWCNTs) at lithographically defined positions on gate oxide surfaces, allowing for the high yield ( approximately 90%) and parallel fabrication of SWCNT device arrays. SWCNTs were first chemically functionalized through diazonium chemistry with a hydroxamic acid end group that both renders the SWCNTs water-soluble and discriminately binds the SWCNTs to basic metal oxide surfaces (i.e., hafnium oxide (HfO2)). The functionalized SWCNTs are then assembled from an aqueous solution into narrow trenches etched into SiO2 films with HfO2 at the bottom. The side walls of the patterned trenches induce alignment of the SWCNTs along the length of the trenches. Heating the structures to 600 degrees C removes the organic moieties, leaving pristine SWCNTs as evidenced by Raman spectroscopy and electrical measurements. Palladium source-drain electrodes deposited perpendicular to the trench length readily contact the ends of the aligned SWCNTs. The resultant devices exhibit the electrical performance expected for SWCNT devices, with no performance deterioration as a result of the placement process. This technique allows for the directed assembly and alignment of SWCNTs over a large area and results in a high yield of working devices, presenting a promising path toward large-scale SWCNT device integration.     

Flame atomic absorption spectrometric determination of trace amounts of palladium,gold and nickel after cloud point extraction

In this article, a sensitive cloud point extraction procedure for the preconcentration of trace amounts of palladium, gold and nickel prior to their determination by flame atomic absorption spectrometry has been developed. The cloud point extraction method is based on the complexation of Pd(II), Au(II), and Ni(II) ions with 1-(2-pyridylazo)-2-naphthol and entrapping in non-ionic surfactant Triton X-114. The main factors affecting cloud point extraction efficiency, such as pH of sample solution, concentration of 1-(2-pyridylazo)-2-naphthol and Triton X-114, equilibration temperature and time, were investigated in detail. Under the optimized conditions, calibration curves were constructed for the determination of palladium, gold and nickel according to the general procedure. Linearity was maintained from 0.01 to 1.0 μg/mL for palladium, 10.0 μg/mL to 1.5 μg/mL for gold, and 10.0 μg/mL to 0.5 μg/mL for nickel. Detection limits based on three times the standard deviation of the blank divided by the slope of analytical curve (3Sb/m) for Pd(II), Au(III), and Ni(11) ions were 3.4, 3.9, and 2.4 μg/mL, respectively. Seven replicate determination of a mixture of 0.5 μg/mL palladium and gold and 0.2 μg/mL nickel gave a mean absorbance of 0.174, 0.150, and 0.201 with relative standard deviation ±1.5, ±1.3, and ±1.8%, respectively. The high efficiency of cloud point extraction to carry out the determination of analytes in complex matrices was demonstrated. The proposed method has been applied for determination of trace amount of palladium, gold and nickel in certified reference material and water samples with satisfactory results.     

Simultaneous separation and preconcentration of trace amounts of copper (II), cobalt (II) and silver (I) by modified Amberlyst®15 resin

A solid phase extraction method for simultaneous preconcentration and separation of trace amounts of copper, cobalt and silver in different samples, using a column packed with modified Amberlyst®15 resin is developed. Amberlyst®15 resin was modified with 5-(4-dimethylaminobenzylidene)rhodanine and then the modified resin was used as a support material for the solid phase extraction and preconcentration of Cu(II), Co(II) and Ag(I) ions from aqueous solution in the pH range 3.5–4.5. The adsorbed metal ions on the column were quantitatively eluted with a 7% thiourea solution prepared in 2?mol?L^?1 HNO₃, which were detected by flame atomic absorption spectrometry. The effects of analytical parameters including pH of the solution, eluent type, flow rate of samples, eluent and matrix ions were investigated for optimization of the presented procedure. The detection limits were 2.1, 0.9 and 0.9?ng?mL^?1 for Cu(II), Co(II) and Ag(I) ions, respectively based on the three times the standard deviations of the blanks. The preconcentration factor was 112.5. The calibration graphs were obtained in the ranges of 0.05 to 10.0, 0.03 to 13.0 and 0.04 to 9.0?µg?mL^?1 for Cu(II), Co(II) and Ag(I) ions concentrations, respectively. Relative standard deviations (n?=?7) for Cu(II), Co(II) and Ag(I) ions were found ±2.5 %, ±0.84% and ±3.8% respectively. The method was applied to the determination of mentioned ions in well water, waste water and lettuce sample.     

Ionic liquid-based dispersive liquid–liquid microextraction for the separation and preconcentration of lead in water samples prior to FAAS determination without chelating agent

In the present study, an environment-friendly sample preparation method termed ionic liquid-based dispersive liquid–liquid microextraction combined with flame atomic absorption spectrometry has been developed for the determination of Pb(II) ion in water samples prior to flame atomic absorption spectrometry determination. In this method, ionic liquid was used as an extraction solvent instead of the organic solvent used in the conventional dispersive liquid–liquid microextraction (DLLME) assay, and there is no need for a chelating agent. Several variables that may affect extraction efficiencies, including pH, the volume of ionic liquid, the type and volume of disperser solvent, salt addition, and the time for centrifugation and extraction were studied and optimised. Under the optimised conditions, the calibration curve exhibited linearity over the range of 20.0–1000.0 μg L^?1. The enrichment factor and the limit of detection based on 3S_b/m were 35.0 and 5.9 μg L^?1, respectively. Seven replicate determination of a solution containing of 100.0 μg L^?1 Pb(II) ions gave a relative standard deviation of ±2.1%. Finally, the feasibility of the proposed method for Pb(II) determination was assessed by the analysis of certi?ed reference material and various water samples and the satisfactory results were obtained.     

Novel Conductive PANI/Hydrophilic Thiacalix[4]areneNanocomposites: Synthesis,Characterization andInvestigation of Properties简

Nanocomposites of polyaniline(PANI) and the macrocycle thiacalix[4]arene tetra sulfonate(TCAS) were successfully synthesized in feed ratios of 1:0.25, 1:0.50 and 1:0.75 by three prevail synthetic methods, i.e. in situ polymerization, emulsion polymerization and solution casting technique. The structures of the nanocomposites were confirmed by FTIR, UV-Vis, XRD, SEM, and TEM techniques. The conductivity was measured by a four probe method. The conductivity was recorded to be as high as 105 × 10 2S cm 1for the nanocomposite with a nanometer size structure and homogeneously distributed morphology. The electroactivity of the nanocomposites was approved by cyclic voltammetry(CV) and impedance spectroscopy technique(EIS). The antioxidant ability and thermal property of the composites were further studied. Preliminary studies have evidenced the production of conductive nanocomposites with good thermal property and relatively good solubility in N-methyl 2-pyrrolidone(NMP), with the antioxidant activity reaching up to 80%.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.