Novel Conductive PANI/Hydrophilic Thiacalix[4]areneNanocomposites: Synthesis,Characterization andInvestigation of Properties简

Nanocomposites of polyaniline(PANI) and the macrocycle thiacalix[4]arene tetra sulfonate(TCAS) were successfully synthesized in feed ratios of 1:0.25, 1:0.50 and 1:0.75 by three prevail synthetic methods, i.e. in situ polymerization, emulsion polymerization and solution casting technique. The structures of the nanocomposites were confirmed by FTIR, UV-Vis, XRD, SEM, and TEM techniques. The conductivity was measured by a four probe method. The conductivity was recorded to be as high as 105 × 10 2S cm 1for the nanocomposite with a nanometer size structure and homogeneously distributed morphology. The electroactivity of the nanocomposites was approved by cyclic voltammetry(CV) and impedance spectroscopy technique(EIS). The antioxidant ability and thermal property of the composites were further studied. Preliminary studies have evidenced the production of conductive nanocomposites with good thermal property and relatively good solubility in N-methyl 2-pyrrolidone(NMP), with the antioxidant activity reaching up to 80%.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.     

Synthesis,characterization, metal sorption,and biological activities of organosoluble and thermally stable azoxanthone‐based polyester

The aim of this work was to develop functionalized polyxanthones, poly(azoxanthone‐ester)s (PAXEs), with biological activities and heavy metal sorption abilities. For this purpose, at first, new xanthone‐based diol moiety was synthesized and then used for polymerization with commercial dicarboxylic acids via polycondensation reaction by Vilsmeier adducts. The monomer and all polymers were characterized by Fourier transform infrared (FTIR) and Nuclear magnetic resonance (NMR) spectroscopies, and the physical properties of these PAXEs including solution viscosity, solubility properties, thermal stability, and thermal behavior were studied. The prepared polyesters showed excellent thermal stability and good solubility in polar aprotic solvents. In addition, evaluation of antioxidant activity of the PAXEs by 2,2‐diphenyl‐1‐picrylhydrazyl assay revealed that synthesized polymers have higher antioxidant activity than xanthone nucleus. Also, evaluation of the antibacterial activities of the diol monomer and polymer showed good antibacterial activity against some bacterial strains (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Pseudomonas aeruginosa). The results showed that these PAXEs can be used in pharmaceutical and food industry (food packaging). Furthermore, these functionalized polyesters were utilized for extraction of environmentally harmful metal cations such as Cr (VI), Co (II), Ni (II), Cu (II), Pb (II), and Cd (II) from aqueous solutions. Copyright © 2015 John Wiley & Sons, Ltd.     

Convenient Synthesis of Thiol Esters from Acyl Chlorides and Disulfides Using Zn/AlCl3

Summary.  Various thiol esters were prepared by condensation of acyl chlorides with disulfides in the presence of Zn/AlCl₃. The advantages of this method are high yields under relatively mild conditions, simple work-up, lack of toxicity, and low costs. Received July, 20, 2001. Accepted September 24, 2001     

Polyvinylpyrrolidone-Supported Hydroperoxide for Selective Oxidation of Aldehydes to Carboxylic Acids and Sulfides to Sulfoxides

The facile immobilization of hydroperoxide on the cross-linked poly(vinylpyrrolidone) is described by treatment of a poly(vinylpyrrolidone)-Vilsmeier adduct with (35%) hydrogen peroxide. The in situ–generated poly(vinyl pyrrolidone)-supported hydroperoxide reagent showed very good performance in chemoselective oxidation of aldehydes to carboxylic acids as well as sulfides to sulfoxides.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Chemoselective Deprotection of Thioacetals/Thioketals Using HIO3 in the Presence of Wet SiO2 Under Mild Solvent-Free Conditions

Abstract

HIO ₃ in the presence of wet SiO ₂ is highly efficient and a mild reagent for selective deprotection of a variety of thioacetals/thioketals to the corresponding parent carbonyl compounds at room temperature and under solvent-free conditions.     

Application of organo-nanoclay as a solid sorbent for rhodium complex separation and preconcentration

An organo-nanoclay is used as a new, easily accessible, and stable solid sorbent for the preconcentration of trace amounts of rhodium ions from aqueous solution, this followed by its determination by flame atomic absorption spectrometry (FAAS). Rh(III) ion was first complexed with 2,3,5,6-tetra(2-pyridyl) pyrazine (TPPZ) at pH values between 3.0 and 4.7, and then the complex was then adsorbed onto the nanoclay. The rhodium ions were eluted from the sorbent with HCl. The rhodium in the effluent was determined by FAAS. The linear analytical range is between 0.14 ng mL^?1 and 20.0 μg mL^?1 in the initial solution, the relative standard deviation at 2.0 μg mL^?1 of rhodium is 2.6% (n?=?8), the detection limit is 0.03 ng mL^?1, and the preconcentration factor is 140. Experimental parameters including the pH, eluent type, interference by other ions and breakthrough volume were optimized. The method was applied to the determination of rhodium in water, road dust and synthetic samples.     

Separation and preconcentration of trace amounts of gold(III) ions using modified multiwalled carbon nanotube sorbent prior to flame atomic absorption spectrometry determination

Multiwalled carbon nanotubes are attractive as sorbents for SPE because they can be used for enrichment of organic compounds and metal ions at trace levels. In this study, multiwalled carbon nanotubes were oxidized with concentrated HNO3, and then the oxidized multiwalled carbon nanotubes were modified with 5-(4'-dimethylamino-benzyliden)-rhodanine. The modified multiwalled carbon nanotubes were used as a solid sorbent for separation and preconcentration of trace amounts of Au(III) ions. The sorption of Au(III) ions was quantitative in the pH range of 2.0-5.0, whereas quantitative desorption occurred instantaneously with 5.0 mL 2.0 M Na2S2O3. The eluted solution was aspirated directly into the flame for atomic absorption spectrometry. The proposed method resulted in an enrichment factor of 94. The RSD of the method was +/- 1.11% (n=10, 2.0 microg/mL) and the LOD was 0.15 ng/mL. The calibration curve for Au(III) was linear between 0.53 ng/mL and 36.0 microg/mL in the initial solution, with an R2 value of 0.9999. The sorbent capacity of the modified multiwalled carbon nanotubes was 7.3 mg Au(III)/g sorbent. The influences of the experimental parameters, including sample pH, sample flow rate, eluent volume and flow rate, sample volume, and interference of some ions on the recoveries of the Au ions, were investigated. The proposed method was applied for preconcentration and determination of Au in different samples.     

Determination of trace amounts of Pd(II) ions in water and road dust samples by flame atomic absorption spectrometry after preconcentration on modified organo nanoclay

This paper describes the application of organo nanoclay, an easily prepared and stable solid sorbent, to the preconcentration of trace amounts of palladium ions in aqueous solution. The organo nanoclay was prepared by adding tetradecyldimethylbenzylamonium chloride onto montmorillonite, which was then modified with 1-(2-pyridylazo)-2-naphthol. The modified nanoclay was used as a solid sorbent for separation and preconcentration of trace amounts of Pd(II) ions, and a simple, sensitive, and economical method was developed for determination of trace amounts of palladium by flame atomic absorption spectrometry. The sorption of Pd(II) ions was quantitative in the pH range of 1.5-5.0, whereas quantitative desorption occurred with 5.0 mL of a mixture containing 1.0 M thiourea and 1.0 M HCl. The RSD of the method was +/- 2.1% (n = 10; concn = 0.5 microg/mL), and the LOD (3sigma(bl); sigma = SD and bl = blank) was 0.1 ng/mL. The calibration curve was linear for concentrations of 0.5-8.0 microg/mL in the initial solution, and the preconcentration factor was 140. The maximum capacity of the sorbent was 2.4 mg Pd(II)/g modified organo nanoclay. The influences of the experimental parameters, including sample pH, eluant volume, eluant type, sample volume, and interfering ions, on the recoveries of the palladium ion were investigated. The proposed method was applied to the preconcentration and determination of palladium in different samples.     

Ligandless-dispersive liquid-liquid microextraction of trace amount of copper ions

In the present work, a new ligandless-dispersive liquid-liquid microextraction (LL-DLLME) method has been developed for preconcentration trace amounts of copper as a prior step to its determination by flame atomic absorption spectrometry. In the proposed approach 1,2-dicholorobenzene and ethanol were used as extraction and dispersive solvents, respectively. Some factors influencing on the extraction efficiency of copper and its subsequent determination were studied and optimized, such as the extraction and dispersive solvent type and volume, pH of sample solution, extraction time and salting out effect. Under the optimal conditions, the calibration curve was linear in the range of 1.0 ng mL⁻¹-0.6 μg mL⁻¹ of copper with R² = 0.9985. Detection limit was 0.5 ng mL⁻¹ in original solution (3S_b/m) and the relative standard deviation for seven replicate determination of 0.2 μg mL⁻¹ copper was ±1.4%. The proposed method has been applied for determination of copper in standard and water samples with satisfactory results.