基于极少量采样的彩绘文物颜料成分分析

随着文物保护理念的提升,越来越提倡文物样品的无损或微损分析;同时由于文物样品的复杂性,对分析技术提出了更加严苛的要求.彩绘类文物的颜料分析研究,对其文物信息的提取,以及古代人类历史、社会、文化的研究和阐述具有重要作用.结合本研究组前期的研究成果,本研究提出了一种在极少量采样的情况下,分析研究文物颜料的方法,并用于榆林卧...     

固相萃取-超高效液相色谱-串联质谱法测定兽药制剂中巴比妥类药物

建立了固相萃取,结合超高效液相色谱-串联质谱(UPLC-MS/MS)测定兽药制剂中巴比妥、苯巴比妥、司可巴比妥和异戊巴比妥4种药物的方法.样品采用乙腈提取,HLB固相萃取柱净化,在ACQUITY BEH C18色谱柱(100 mm×2.1 mm,1.7 μm)上,以乙腈和水溶液为流动相梯度洗脱,质谱以多反应监测(MRM...     

电化学免疫传感器检测TET1蛋白

基于Ten-eleven translocation 1(TET1)蛋白催化5-甲基胞嘧啶(5-Methylcytosine,5mC)生成5-羟甲基胞嘧啶(5-Hydroxymethylcytosine,5hmC),结合5hmC抗体的免疫识别反应,建立了一种电化学分析方法用于TET1蛋白的特异性检测.以金纳米颗粒(Au...     

Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.     

利用“网包法”制备高效液相色谱大环抗生素类手性固定相

万古霉素和替考拉宁都属于糖肽类的大环抗生素，具有立体的环状结构和多个手性中心，是两种常见的手性识别材料，广泛应用于对映体的色谱手性分离分析。该文以万古霉素和替考拉宁为手性选择剂，哌嗪为单体，4，4'-二苯基甲烷二异氰酸酯（MDI）、1，6-己二异氰酸酯（HDI）和2，4-甲苯二异氰酸酯（TDI）为交联剂，通过界面聚合反应形成网状层包裹硅胶载体的方法制得6种高效液相色谱手性固定相，用于分离外消旋化合物，并与MDI直接交联万古霉素和替考拉宁在硅胶表面所得固定相进行了比较。结果表明，利用"网包法"和直接交联法制备的手性柱与商品万古霉素和替考拉宁柱之间具有互补性，均对不同的外消旋体有不同程度的拆分。     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

金属离子与腺嘌呤异构体复合物的稳定性

在B3LYP/6-311++G**//6-31+G*基组水平上结合PCM模型系统的优化了气相和液相环境中14种腺嘌呤异构体与四种金属离子(Na+,K+,Mg2+,Ca2+)形成的132个稳定复合物。通过能量对比,得到了所有复合物异构体在气液两相中的稳定性顺序及不同金属离子与同一异构体形成的复合物的能量排序,首次给出了液相中这些不同金属离子复合物的最稳定结构。结果发现溶剂效应导致了液相中的复合物稳定性顺序与气相中的相比发生了很大变化;同一异构体与不同金属离子形成的复合物其稳定性在排序中也变化很大。对于这些变化,本文分别从金属离子与腺嘌呤的复合物在气相中的结合能(EBE)及在液相中的溶质溶剂相互作用能(Epol)能等方面进行了系统的阐述     

正丁烷和异丁烷在改性纳米HZSM-5上的芳构化反应

用脉冲微反装置评价了正丁烷和异丁烷在氢型和锌改性的纳米ZSM-5催化剂上的反应活性和芳构化选择性.结果表明,在550℃下,异丁烷在氢型和不同锌负载量的纳米ZSM-5催化剂上的转化率都远高于正丁烷,但其芳构化选择性低于正丁烷.脱甲基活化是异丁烷和正丁烷的重要活化方式,也是影响其芳构化选择性的主要因素.锌改性在提高异丁烷和正丁烷转化率的同时,也促进了正丁烷和异丁烷的脱甲基活化.在混合丁烷进料反应的情况下,正丁烷和异丁烷的转化率与其单独进料时十分接近,这说明正丁烷和异丁烷共存时不会发生明显的竞争吸附和反应.纳米ZSM-5因晶粒度小,孔道短和微孔扩散阻力低而有利于异丁烷转化.     

过碳酸钠-醋酸酐作用下的Baeyer-Villiger反应

在醋酸酐介质中, 过碳酸钠可以与酮进行Baeyer-Villiger反应, 将它们氧化成相应的酯。其中脂环酮的反应结果较好, 环内酯的产率约为80%。芳香酮除芳环被活化的以外, 效果欠佳。当反应施加超声辐射后可显著加快反应速度, 并对过碳酸钠的作用机理进行了讨论。     

锌掺杂对TiO2染料敏化电池光阳极中电荷俘获态分布及电子复合过程的影响

基于瞬态光电压和瞬态光电流技术研究了锌掺杂的TiO2染料敏化太阳能电池中电子复合及传输的动力学行为.通过实验获得了不同阳极掺杂条件下的电子复合时间常数与电子收集时间常数,考察了锌掺杂对电池阳极材料导带能级和电子俘获态的影响.研究结果表明,锌的掺杂在提高TiO2导带能级的同时延长了俘获态电子的复合时间常数,从而大大提高了电池的开路电压.