Two intermediates in the reaction between dibenzoylacetylene and enol systems in the presence of triphenylphosphine in THF/H2O

Abstract  The reaction between dibenzoylacetylene and enol systems, such as acetylaceton or cyclohexane-1,3-dione in the presence of triphenylphosphine in THF/H₂O, leads to 4-acetyl-3-benzoyl-1-phenyl-1,5-hexanedione and 2-hydroxy-3-(2-oxo-2-phenylethyl)-2-phenyl-3,5,6,7-tetrahydro-1-benzofuran-4(2H)-one. Subsequently, these compounds undergo cyclization and elemination reactions in acidic dichloromethane at room temperature to produce known highly functionalized furan derivatives. Graphical abstract        

High-throughput quantification of palladium in water samples by ion pair based-surfactant assisted microextraction

A novel method for the determination of palladium as a metal ion model was developed by ion pair based surfactant-assisted microextraction (IP-SAME) and inductively coupled plasma-optical detection (ICP-OES). In this methodology, a cationic surfactant was used in extraction process. It has two fundamental functions: (1) the formation of an emulsified phase and (2) the ion pair formation with Pd(II) in the presence of iodide ions and making PdI₄²⁻$\text{Pd}{{\text{I}}_4}^{2-}$ extractable into organic phase (active microextraction). The effective parameters on the extraction recovery such as the types of extraction solvent and the surfactant, surfactant concentration, KI amount and HCl concentration of the sample were investigated and optimized. In the proposed approach, tetradecyl trimethyl ammonium bromide (TTAB) was used as emulsifier and ion pairing agent, and 1-octanol was selected as extraction solvent. Under the optimum conditions, the enhancement factor as large as 146 was obtained. The detection limit for palladium was 0.2 μg L⁻¹, and the relative standard deviation (RSD) was 4.1% (n = 5, C = 10.0 μg L⁻¹). The proposed method was applied for extraction and determination of palladium in different water samples.     

Synthesis and activity measurement of some water-gas shift reaction catalysts

The effect of calcination temperature on the activity and some properties of low temperature water gas shift reaction catalysts has been investigated. The activities of catalysts have been determined using a fixed bed catalytic reactor. The following results may be deduced from the present study. 1. The catalysts' total surface area decreased with increasing calcination temperature, presumably due to the partial sintering of the catalysts particles. 2. The presence of an amorphous CuO phase within the structure of some catalysts may be related to the desirable conditions prevailing during synthesis of the latter. 3. Observation of a similar trend between the increase in copper crystallite particle size and enhancement of catalyst activities with increasing calcination temperature demonstrates the important contribution made by the copper crystallite phase to the overall activities of water gas shift reaction catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

Optimization of profenofos organophosphorus pesticide degradation by zero-valent bimetallic nanoparticles using response surface methodology

This study synthesized bimetallic Fe/Ni nanoparticles and used them for catalytic degradation of profenofos, an organophosphorus pesticide. This novel bimetallic catalyst (Fe/Ni) was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis spectroscopy (EDAX) and X-ray diffraction (XRD). The bimetallic nano-catalyst was prepared at diameters of 20–50 nm and was shown to effectively degrade profenofos. A three-factor central composite design combined with response surface methodology was used to maximize profenofos removal using the bimetallic system. A quadratic model was built to predict degradation efficiency. ANOVA was used to determine the significance of the variables and interactions between them. Good correlation between the experimental and predicted values was confirmed by the high F-value (16.38), very low P-value (<0.0001), non-significant lack of fit, an appropriate coefficient of determination (R² = 0.936) and adequate precision (14.75). The highest removal rate attained was 94.51%.     

The Importance of Polarity/Polarizability Interaction on the Acidity Behavior of 9,10-Anthraquinone and 9-Anthrone Derivatives in Methanol-Water Mixed Solvents Using Target Factor Analysis and QSPR Approaches

The influence of solvent properties on acidity constants of some newly synthesized 9,10-anthraquinone and 9-anthrone derivatives was studied in methanol-water mixtures in a composition range of 0.57 to 1.0 methanol mole fraction. The model was established by using both multiple linear regression and target factor analysis. Both methods revealed that the solvent polarity/polarizability parameter ^* is a major factor in controlling the acidity behavior of the anthraquinones and anthrones studied in binary methanol-water mixed solvents. A QSPR study was conducted to drive the relationships between the ^* coefficient s and the polarity/polarizability of molecules. Both dipole moment and polarizability were found to have a linear relationship with s. The results confirm that, in the dipolar protic solvents used, the dipole-dipole interaction (for neutral molecules) and the ion-dipole interaction (for ionized molecules) are the major factors controlling the acidity behavior of these compounds.     

Preparation and Characterization of DGEBA/EPN Epoxy Blends with Improved Fracture Toughness

The physical and mechanical properties of blends composed of two kinds of epoxy resins of different numbers of functional groups and chemical structure were studied.One of the resins was a bifunctional epoxy resin based on diglycidyl ether ofbisphenol A and the other resin was a multifunctional epoxy novolac resin.Attempt was made to establish a correlation between the structure and the final properties of cured epoxy samples.The blend samples containing high fraction of multifunctional epoxy resin showed higher solvent resistance and lower flexural modulus compared with the blends containing high fraction of bifunctional epoxy resin.The epoxy blends showed significantly higher ductility under bending test than the neat epoxy samples.The compressive modulus and strength increased with increasing of multifunctional epoxy in the samples,probably due to enhanced cross-link density and molecular weight.Morphological analysis revealed the presence of inhomogeneous sub-micrometer structures in all samples.The epoxy blends exhibited significantly higher fracture toughness (by 23％ at most) compared with the neat samples.The improvement of the fracture toughness was attributed to the stick-slip mechanism for crack growth and activation of shear yielding and plastic deformation around the crack growth trajectories for samples with higher content of bifunctional epoxy resin as evidenced by fractography study.