Optimization of profenofos organophosphorus pesticide degradation by zero-valent bimetallic nanoparticles using response surface methodology

This study synthesized bimetallic Fe/Ni nanoparticles and used them for catalytic degradation of profenofos, an organophosphorus pesticide. This novel bimetallic catalyst (Fe/Ni) was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis spectroscopy (EDAX) and X-ray diffraction (XRD). The bimetallic nano-catalyst was prepared at diameters of 20–50 nm and was shown to effectively degrade profenofos. A three-factor central composite design combined with response surface methodology was used to maximize profenofos removal using the bimetallic system. A quadratic model was built to predict degradation efficiency. ANOVA was used to determine the significance of the variables and interactions between them. Good correlation between the experimental and predicted values was confirmed by the high F-value (16.38), very low P-value (<0.0001), non-significant lack of fit, an appropriate coefficient of determination (R² = 0.936) and adequate precision (14.75). The highest removal rate attained was 94.51%.     

Strong red emissions induced by Pt–Pt interactions in binuclear cycloplatinated(II) complexes containing bridging diphosphines

A series of dinuclear cycloplatinated(II) complexes with general closed formula of [Pt₂Me₂(C^N)₂(μ‐P^P)] (C^N = 2‐vinylpyridine (Vpy), 2,2′‐bipyridine N‐oxide (O‐bpy), 2‐(2,4‐difluorophenyl)pyridine (dfppy); P^P = 1,1‐bis(diphenylphosphino)methane (dppm), N,N‐bis(diphenylphosphino)amine (dppa)) are reported. The complexes were characterized by means of NMR spectroscopy. Due to the presence of dppm and dppa with short backbones as bridging ligands, two platinum centres are located in front of each other in these complexes so a Pt…Pt interaction is established. Because of this Pt…Pt interaction, the complexes have bright orange colour under ambient light and are able to strongly emit red light under UV light exposure. These strong red emissions originate from a ³MMLCT (metal–metal‐to‐ligand charge transfer) electronic transition. In most of these complexes, the emissions have unstructured bell‐shaped bands, confirming the presence of large amount of ³MMLCT character in the emissive state. Only the complexes bearing dfppy and dppa ligands reveal dual luminescence: a high‐energy structured emission originating from ³ILCT/³MLCT (intra‐ligand charge transfer/metal‐to‐ligand charge transfer) and an unstructured low‐energy band associated with ³MMLCT. In order to describe the nature of the electronic transitions, density functional theory calculations were performed for all the complexes.     

Reverse micelle-mediated dispersive liquid-liquid microextraction of 2,4-dichlorophenoxyacetic acid and 4-chloro-2-methylphenoxyacetic acid

A supramolecular solvent consisting of reverse micelles of decanoic acid, dispersed in a continuous phase of tetrahydrofuran:water, was proposed as an efficient microextraction technique for extraction of selected chlorophenoxy acid herbicides from water samples prior to high-performance liquid chromatography UV determination. The disperser solvent (1.0 mL tetrahydrofuran) containing 20 mg decanoic acid was rapidly injected into 10.0 mL of water sample. After centrifugation, the reverse micelle-rich phase (25 ± 0.5 μL) was floated at top of the home-designed centrifuge tube. The solvent was collected and 20 μL of it was injected into high-performance liquid chromatography for analysis. The results showed that the in situ solvent formation and extraction process can be completed in a few seconds. Under the optimal conditions, limits of detection of the method for 4-chloro-2-methylphenoxyacetic acid and 2,4-dichlorophenoxyacetic acid were in the range of 0.5-0.8 μg L(-1) and the repeatability of the proposed method, expressed as relative standard deviation, varied in the range of 2.5-3.2%. Linearity was found to be in the range of 1-200 μg L(-1) and the preconcentration factors were between 148 and 157. The mean percentage recoveries exceeded 92.0% for all the spiking levels in real water samples.     

Antibacterial activity of the essential oil and main components of two Dracocephalum species from Iran

The antibacterial activity of Dracocephalum polychaetum and D. surmandinum essential oils and two main components were investigated. Essential oils of the plants were analysed by GC and GC-MS. Twenty-three components were characterised in the essential oil of D. polychaetum. The oil was rich in oxygenated (73.1%) and hydrocarbon (25.0%) monoterpenes including perilla aldehyde (63.4 %) and limonene (22.1%) as the major constituents. From 25 identified compounds (97.8%) in the oil of D. surmandinum perilla aldehyde (54.3%) and limonene (30.1%) were the main constituents. The bioassays exhibited that all of the Gram-positive and Gram-negative bacteria tested were highly inhibited in the presence of the oils and main components investigated. The most sensitive microorganism to the oils was found to be Staphylococcus epidermidis with the lowest MIC value of 0.3?mgmL(-1). The resistant Gram-negative Pseudomonas aeruginosa was highly inhibited by the oil of D. polychaetum with MIC value of 2.4?mgmL(-1).     

Diammonium Hydrogen Phosphate: An Efficient and Versatile Catalyst for the One‐Pot Synthesis of Tetrahydrobenzo[b]pyran Derivatives in Aqueous Media

Diammonium hydrogen phosphate was used as a mild, efficient, neutral, and cheap catalyst for the synthesis of various 4H‐benzo[b]pyran derivatives via a one‐pot, three‐component condensation of aromatic aldehydes, active methylene compounds, and dimedone in aqueous media.     

A Novel and Efficient One‐Pot Synthesis of 2‐Aminopyrimidinones and Their Self‐Assembly

A three‐component reaction of benzaldehyde derivatives, methyl cyanoacetate, and guanidinium carbonate affords 2‐amino‐4‐aryl‐1,6‐dihydro‐6‐oxopyrimidine‐5‐carbonitriles and the four‐component reaction of benzaldehyde derivatives, methyl cyanoacetate, and guanidinium hydrochloride in the presence of piperidine leads to piperidinium salts of pyrimidinones. X‐ray crystallography data confirm self‐assembly and H‐bonding in these compounds.     

Spectrophotometric determination of beryllium in water samples after micelle-mediated extraction preconcentration

A new micelle-mediated phase preconcentration method for preconcentration of ultra-trace quantities of beryllium as a prior step to its determination by spectrophotometry has been developed. Chrome Azurol S (CAS) and cetyltrimethylammonium bromide (CTAB) were used as chelating agent and cationic surfactant, respectively. The method evaluates and eliminates the blank bias error present in such procedures using mean centering of ratio spectra. This procedure gives more accurate results than the traditional approach using absorbance values against reagent blank. The optimal extraction and reaction conditions were studied and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration and improvement factors) were obtained. Linearity was obeyed in the range of 0.9-18.0 ng mL⁻¹ (1.00 × 10⁻⁷-2.00 × 10⁻⁶ mol L⁻¹) of beryllium. The detection limit of the method is 0.51 ng mL⁻¹ (5.66 × 10⁻⁸ mol L⁻¹) of beryllium. The interference effect of some anions and cations was also tested. The method was applied to the determination of beryllium in spring water samples.     

Charge separation by tetrahexahedron-SrTiO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> heterojunction as an efficient photocatalyst

Charge separation plays a key role in the conversion of solar energy into chemical energy for use in the redox reaction and as well as in the photocatalytic activity. In this study, SrTiO₃ particles with different morphologies including irregular, tetrahexahedron, and cube were synthesized by an in situ solvothermal method. The photocatalytic activity of the synthesized nanoparticles was investigated in the photocatalytic decomposition of methylene blue under UV light irradiation. Tetrahexahedron SrTiO₃ particles exhibited high decomposition activity (70 %), which is about two times higher than those of the irregular and cubic SrTiO₃ particles. The high decomposition activity of tetrahexahedron SrTiO₃ particles could be attributed to the improvement of charge separation achieved on different crystal facets. To reach a good charge separation, tetrahexahedron SrTiO₃/TiO₂ coupled nanoparticles were fabricated by impregnation method. Results showed that coupling tetrahexahedron SrTiO₃ with TiO₂ could produce efficient charge separation between tetrahexahedron SrTiO₃ and TiO₂ due to their matched band edges. In order to achieve better charge separation, the tetrahexahedron SrTiO₃/90 %TiO₂ sample was calcined at different temperatures in the 450–750 °C range. Tetrahexahedron SrTiO₃/90 %TiO₂ coupled nanoparticles calcined at 650 °C show high photocatalytic activity compared with other samples. The prepared samples were characterized by using various techniques such as X-ray diffraction, scanning electron microscopy, photoluminescence emission spectra, and UV–Vis diffuse reflectance spectroscopy.     

A comparative MP2 study between water- and acid-assisted proton transfer: allophanic acid as a case of study

Electronic structures of allophanic acid were studied using MP2/6-311++G(d,p) level of theory. Five most stable tautomers were selected and stability of them was studied in detail. Obtained data showed that tautomer 1 having hydrogen atom in the central nitrogen N3 and also in a trans conformation of carbonyl and amino functional groups becomes the most stable one. Then, interconversion of these tautomers to each other was investigated step by step through internal rotation and proton transfer routes. Results indicated that movement of protons determines rate-determining step of all paths A–E. Effects of different solvents were carefully surveyed for each tautomer, and among investigated solvents, water made slight stabilization. Activation barrier for proton exchange assisted by one water molecule and one formic acid molecule was also studied, separately. Both molecules had a great influence on lowering barrier especially for proton transfer routes. Comparative MP2 study showed that the barrier will be lowered much more when acid-assisted proton exchange takes place.