Noscapine-derived β-amino alcohols as new organocatalysts for enantioselective addition of diethylzinc to aldehydes

In this paper, synthesis of two derivatives of noscapine and their application as organocatalysts in the asymmetric addition of diethylzinc to aromatic aldehydes is reported. The first catalyst (2) was synthesized by the reduction of lactone ring of noscapine to form the corresponding diol, and the second one (3) was prepared by tert-butyl dimethyl silylation of the primary hydroxyl group of 2. Excellent yields and high ees up to 95% were obtained by using 3 as the catalyst. To the best of our knowledge, this is the first report on the application of lactone ring opened noscapinoid compounds as organocatalysts in asymmetric reactions.     

Extraction and separation of zirconium from hafnium by using nano-structured supramolecular solvent microextraction method

In the present study, a simple versatile extraction method based on supramolecular solvent microextraction followed by inductively coupled plasma atomic emission spectrometry was developed for the extraction, separation and determination of zirconium (Zr) from hafnium (Hf). Zr and Hf were complexed with bis(2,4,4-trimethylpentyl) phosphinic acid, to obtain hydrophobic complex, and extracted into supramolecular solvent phase. The effective parameters on the supramolecular solvent microextraction efficiency were studied and optimized by using two different optimization methods: one variable at a time and central composite design. Under the optimum conditions, the linear range of 0.3–200.0 and 2.0–200.0 µg L^?1, detection limits (S/N = 3) of 0.1 and 0.6 µg L^?1, and precisions (n = 5) of 3.2–4.9% and 3.0–5.1% were obtained for Zr and Hf, respectively. Finally, the proposed method has been successfully applied for the extraction and separation of these cations in zirconium ore sample.     

Numerical investigation of mixed convection heat transfer of a nanofluid in a circular enclosure with a rotating inner cylinder

Journal of Thermal Analysis and Calorimetry - In the present paper, mixed convection heat transfer of water–Al2O3 nanofluid in the space between two cylinders is investigated numerically. The...     

An experimental study of the effects of Matricaria chamomilla extract on cutaneous burn wound healing in albino rats

Previous studies conducted on the anti-inflammatory, antimicrobial and antioxidant effects of Matricaria chamomilla (chamomile) extract led us to study the effect of topical chamomile extract on burn wound healing in albino rats. Thirty male albino rats (250-300 g) were randomly divided into three groups, as control, vehicle, and treatment. Second-degree burning was induced in 20% of whole surface area of animal body by placing the back of animal into boiling water for 8s. Animals of control group received no treatment. Animals of vehicle and treatment groups were treated topically by olive oil and extract dissolved in olive oil twice a day respectively from the first day of burn induction to complete wound healing. The percentage of wound healing was calculated weekly. The results showed that there was significant difference (p < 0.05) between vehicle and treatment groups. So we concluded that the chamomile extract in the form of rubbing oil had a good potential for acceleration of burn wound healing in rats.     

A Simple Indirect Route for the Synthesis of N-Alkyl-4-imino-1,4-dihydro-2H-3,1-benzoxazin-2-ones

Summary. Novel N-alkyl-4-imino-1,4-dihydro-2H-3,1-benzoxazin-2-ones were synthesized in a single step by Baeyer–Villiger oxidation of N-alkyl-3-imino-2-indolinone derivatives in high yields. The structures of the products were determined by spectral data and by X-ray diffraction. Besides their novel structures, these compounds may have important biological activities and industrial applications.     

Optimization of polymeric triiodide membrane electrode based on clozapine-triiodide ion-pair using experimental design

Central composite design (CCD) and response surface methodology (RSM) were developed as experimental strategies for modeling and optimization of the influence of some variables on the performance of a new PVC membrane triiodide ion-selective electrode. This triiodide sensor is based on triiodide-clozapine ion-pair complexation. PVC, plasticizers, ion-pair amounts and pH were investigated as four variables to build a model to achieve the best Nernstian slope (59.9 mV) as response. The electrode is prepared by incorporating the ion-exchanger in PVC matrix plasticized with 2-nitrophenyl octal ether, which is directly coated on the surface of a graphite electrode. The influence of foreign ions on the electrode performance was also investigated. The optimized membranes demonstrate Nernstian response for triiodide ions over a wide linear range from 5.0 x 10(-6) to 1.0 x 10(-2)mol L(-1) with a limit of detection 2.0 x 10(-6) mol L(-1) at 25 degrees C. The electrodes could be used over a wide pH range 4-8, and have the advantages of easy to prepare, good selectivity and fast response time, long lifetime (over 3 months) and small interferences from hydrogen ion. The proposed electrode was successfully used as indicator electrode in potentiometric titration of triiodide ions and ascorbic acid.     

Surface Properties of Low Density Polyethylene upon Low-Temperature Plasma Treatment with Various Gases

The surface of a LDPE was modified by Ar, O₂, N₂, CO₂ gaseous plasma. The changes in surface morphology and surface wettability were investigated using AFM and SEM. The surface chemical changes of LDPE were also characterized by FTIR-ATR. The SEM and AFM results demonstrated variable changes in surface roughness for different types of plasma gas used, the changes being more for the Ar and N₂ plasma treatments. Considering the nature of the LDPE film, XRD studies were carried out to determine changes in the percentage crystalinity. The results showed that all low pressure O₂, Ar, N₂, CO₂ gas plasmas improved the wettability of LDPE films. Contact angles decreased significantly depending on the discharge powers and exposure times. Surface morphology was also found to vary with plasma discharge powers, exposure times, and the type of gas being used. Ar and N₂ gas plasmas in general produced more superior results.     

Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.     

Charge separation by tetrahexahedron-SrTiO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> heterojunction as an efficient photocatalyst

Charge separation plays a key role in the conversion of solar energy into chemical energy for use in the redox reaction and as well as in the photocatalytic activity. In this study, SrTiO₃ particles with different morphologies including irregular, tetrahexahedron, and cube were synthesized by an in situ solvothermal method. The photocatalytic activity of the synthesized nanoparticles was investigated in the photocatalytic decomposition of methylene blue under UV light irradiation. Tetrahexahedron SrTiO₃ particles exhibited high decomposition activity (70 %), which is about two times higher than those of the irregular and cubic SrTiO₃ particles. The high decomposition activity of tetrahexahedron SrTiO₃ particles could be attributed to the improvement of charge separation achieved on different crystal facets. To reach a good charge separation, tetrahexahedron SrTiO₃/TiO₂ coupled nanoparticles were fabricated by impregnation method. Results showed that coupling tetrahexahedron SrTiO₃ with TiO₂ could produce efficient charge separation between tetrahexahedron SrTiO₃ and TiO₂ due to their matched band edges. In order to achieve better charge separation, the tetrahexahedron SrTiO₃/90 %TiO₂ sample was calcined at different temperatures in the 450–750 °C range. Tetrahexahedron SrTiO₃/90 %TiO₂ coupled nanoparticles calcined at 650 °C show high photocatalytic activity compared with other samples. The prepared samples were characterized by using various techniques such as X-ray diffraction, scanning electron microscopy, photoluminescence emission spectra, and UV–Vis diffuse reflectance spectroscopy.     

Synthesis and characterization of M(II) (M = Cd,Hg and Pb) complexes with naphthodiaza-crown macrocyclic ligand and study of metal ion recognition by fluorescence, 1H NMR spectroscopy,and DFT calculation

To find metal ion recognition by L (L = O₂N₂-donor naphthodiaza-crown macrocyclic ligand), the complexes [ML]²⁺ (M = Cd, Hg and Pb) were synthesized and characterized by IR, ¹H, ¹³C NMR, and mass spectrometry, as well as elemental microanalysis. Hg(II) showed perceptible enhancement of the fluorescence of L in which ultra-low limit of detection for Hg(II) by L was determined as 1 nM in ethanol and DMSO. L reserved selectivity of Hg(II) in its binary mixtures with metal cations in solution. A 1 : 1 stoichiometry was found for the interaction of Hg(II) with L while Benesi–Hildebrand method was applied to calculate its complexation binding constant (K_BH) employing fluorescence spectrophotometry. The monitoring of the chemical shifts in ¹H NMR spectra of these complexes demonstrated that the central macrocycle of L was tailored for the size of Hg(II). Density functional theory calculations using B₃LYP/6–31G* basis set demonstrated that the macrocycle cavity of L was properly fitted for complex formation with Hg(II) cation, while both Cd(II) and Pb(II) cations did not form strong bonds with L from inadequate cation size. The present study shows detection method of Hg(II) and also possible application of naphthodiaza as an appropriate fluorophore macrocyclic ligand for detecting other metal ions.